Contents

The Physics of Metals and Metallography

Vol. 120, No. 10, 2019

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. The Physics of Metals and Metallography ISSN 0031-918X.

Electrical and Magnetic Properties

Specific Features of the Magnetocaloric Effect in a Uniaxial Paramagnet with Kramers Ions

E. E. Kokorina and M. V. Medvedev p. 925  abstract

Magnetic State and Phase Composition of Co3C Nanoparticles

K. N. Mikhalev, A. Yu. Germov, E. Yu. Medvedev, A. P. Gerashchenko, A. E. Ermakov, M. A. Uimin, S. I. Novikov, T. V. D’yachkova, A. P. Tyutyunnik and Yu. G. Zainulin p. 930  abstract

Structure, Phase Transformations, and Diffusion

Influence of Vanadium Microalloying on Isothermal Transformation Behavior of Eutectoid Steel

Cai Zhen, Mao Xin-ping, Bao Si-qian, Zhao Gang and Hu Xiao p. 936  abstract

Structure and Phase Composition of Sputtered Films of Hafnium–Carbon Alloys

Yu. Zh. Tuleushev, V. N. Volodin, F. M. Pen’kov, E. A. Zhakanbaev, E. E. Suslov and A. S. Kerimshe p. 943  abstract

Recrystallization Kinetics of Niobium with Submicrocrystalline Structure

L. M. Voronova, M. V. Degtyarev and T. I. Chashchukhina p. 949  abstract

Ferritic Decomposition in Fe–36Ni–3Cr Invar Alloy

V. V. Sagaradze, N. V. Kataeva, V. A. Zavalishin, A. V. Litvinov and M. F. Klyukina p. 956  abstract

Effect of Annealing on the Structure of Metallic Diffusive Membrane Filters on the Base of Palladium

O. V. Akimova and A. A. Veligzhanin p. 962  abstract

Formation of the Structure and Properties upon Thermohydrogen Treatment of the Alloy Based on Titanium Aluminide Ti2AlNb

A. G. Illarionov, O. G. Khadzhieva, S. M. Illarionova and E. D. Merson p. 969  abstract

Mechanical Properties of Tube Steel after Full Hardening with Austenite Stabilization

A. N. Makovetsky, D. A. Mirzaev, L. I. Yusupova, A. O. Krasnotalov, A. A. Mirzoev and S. A. Sozykin p. 976  abstract

Strength and Plasticity

Modeling of Wear Behavior of Al–Si/Al2O3 Metal Matrix Composites

M. Megahed, D. Saber and M. A. Agwa p. 981  abstract

Effect of The Processes of Self-Tempering and Tempering on The Mechanical Characteristics and the Character of Fracture of Low-Carbon Martenstic Steel Quenched in Air

R. A. Vorobev, V. N. Dubinskii and V. V. Evstifeeva p. 989  abstract

Atomistic Modeling of Stacking Faults in Cementite. Planes Containing Vector [001]

L. E. Kar’kina and I. N. Kar’kin p. 995  abstract

Mechanical and Thermomechanical Properties of the Ti50Pd40Ni10 Alloy with a High-Temperature Shape-Memory Effect Studied on a Workpiece in the Form of a Bar in the Annealed State

N. N. Popov, D. V. Presnyakov, V. F. Lar’kin, E. B. Suvorova and A. A. Kostyleva p. 1001  abstract

The Microstructure and High-Strain-Rate Superplasticity of the Al–Mg–Ni–Fe–Mn–Cr–Zr Alloy

A. A. Kishchik, A. D. Kotov and A. V. Mikhaylovskaya p. 1006  abstract

Mechanisms of Superplastic High-Rate Deformation in the Al–Mg–Zn–Fe–Ni–Zr–Sc Alloy

O. A. Yakovtseva, A. D. Kotov, M. N. Sitkina, A. V. Irzhak and A. V. Mikhaylovskaya p. 1014  abstract

Heat Criterion of the Change of Strain-Hardening Stages in Austenitic Stainless Steel

A. G. Lunev and M. V. Nadezhkin p. 1021  abstract