Vol. 87, No. 11, 2024
Protective Coatings on Hafnium Hydride and Their Effect on Its Thermal Decomposition
p. 1573 abstract
Multipoint Kinetics Model with Power Reactivity Effect for the Axial Offset Control in the VVER-1200 Nuclear Reactor in the Load-Following Mode
p. 1579 abstract
Influence of the Elemental Composition on the Electrical Resistivity of Ti–B–C Coatings Deposited by Magnetron Sputtering
p. 1591 abstract
Regularities of the Formation of the Structure of Rapidly Quenched Powder of a Heat-Resistant Ti-Based Alloy Produced by PREP Method
p. 1596 abstract
Polymer-Ceramic Composite for Manufacturing Dielectric Parts of Low-Thrust Space Engines
p. 1609 abstract
Comparative Characteristics of Catalytically Active MoSx Films in the Hydrogen Evolution Reaction on a MoSx/WSe2 Heterojunction Photocathode
p. 1614 abstract
Analysis of the Efficiency of Flow Accumulators of Phase Transition Heat
p. 1621 abstract
Corbino Voltage Generation for a High-Temperature Superconductor
p. 1627 abstract
Features of Fast Output Energy Regulation in a Linear Accelerator for Proton Therapy
p. 1632 abstract
Features of Synchrotron Beam Orbit Correction Software
p. 1636 abstract
Designing an Irradiator for the In-Reactor Testing of Absorbing Materials of Nuclear Reactor Control Bodies
p. 1640 abstract
Project of a High Efficiency Small-Sized Laser Neutron Generator
p. 1645 abstract
Calibration of the Hyperon+ Gamma-Nuclear Transition Detector with an External Trigger
p. 1649 abstract
Developing an Amplifier for a 2.8 GHz Klystron Pulse Generator and Driver
p. 1658 abstract
Optimizing Drift Tube Parameters in IH and SPR Structures
p. 1665 abstract
Debuncher for the Formation of a Beam of Light Ions before Injection into the Storage Ring of a Synchrotron
p. 1670 abstract
Developing a Two-Section 8-MeV Linear Electron Accelerator for Applied Research
p. 1676 abstract
Calculating the Response of a High-Temperture Superconductor to Microsecond Current Pulses with Allowance for Heating
p. 1682 abstract
Interaction of Chrome Coating with Cladding Made of EP823-Sh Steel in the Temperature Range 420–650°C
p. 1689 abstract
Improving the Reliability of Splined Joints During Laser Quenching
p. 1696 abstract
Search for Neutrino–Gravitational Correlations on the OGRAN and BUST Underground Detectors
p. 1703 abstract
Formation of a Nickel Alloy Powder Coating on Thin-Walled Tubes by High-Speed Laser Cladding
p. 1713 abstract
Evolution of Dispersed Systems of Metal Oxide Nanoparticles Obtained in Plasma Discharge in Liquids under the Effect of Ultrasound
p. 1722 abstract
Method for Assessing the Optical Properties of Multilayer Tissues of the Gastrointestinal Tract ex Vivo
p. 1727 abstract
Lutetium Fluoride (LuF3) Nanoparticles As Promising Nanoradiosensitizers for Melanoma Therapy
p. 1730 abstract
CaCO3 Microparticle-Based Carriers: Optimization of BSA Loading by Coprecipitation
p. 1736 abstract
Analyzing 3D Nanostructures of Biological Materials and Objects via Scanning- and Optical-Probe Nanotomography
p. 1740 abstract
Principles of Chemical Designing of Styrene-Based Plastic Scintillators Doped with Quantum Dots
p. 1744 abstract
Controlling the Luminescence of Quantum Dots in Hybrid Structures Based on Porous Silicon
p. 1750 abstract
Using Time-Resolved Microscopy to Investigate Subcellular Hyperthermia
p. 1754 abstract