Vol. 60, No. 4, 2025
A Review of Studies on Improving the Plastic Properties of Additive Materials Under Strong Pulsed Current
p. 2353 abstract
Mechanics of Solids in Non-Orthogonal Space-Time
p. 2370 abstract
On Dynamic Contact Points Problems with Dies of Complex Rheologies in the Quarter Plane of an Anisotropic Composite
p. 2376 abstract
Analysis of Elastic Properties of Cubic Crystals of Simple Substances Using the Diagram A – ν0
p. 2385 abstract
Prediction of the Load-Bearing Capacity of Curved Rotating Reinforced Discs Made of Rigid-Plastic Various-Resistance Materials
p. 2398 abstract
Soliton-Like Dispersive Lamb Waves in an Anisotropic Layer
p. 2420 abstract
Optimal Reorientation of a Rigid Body (Space Vehicle) with Limited Control Based on a Combined Quality Functional
p. 2428 abstract
Convertion of Wave Modes upon Reflection at the Boundary between Elastic Half-Spaces
p. 2445 abstract
Mathematical Modeling of Creep of Aluminum Alloy 1570P (Al-Mg-Sc System) Using Kinetic Physical-Mathematical Theory of Metal Creep
p. 2453 abstract
On an Analytical Solution to the Creep Problem of a Viscoelastic Cylindrical Layer under Torsional Loading
p. 2465 abstract
Rectangular Plate on an Elastic Base with Arbitrary Boundary Conditions and Arbitrary Load
p. 2474 abstract
Study of Resistance to Impact Penetration of Auxetic Metamaterials at Various Angles of Rotation of Their Internal Cellular Structure
p. 2491 abstract
On the Theory of Characteristics of Spatial Equations of Perfect Plasticity in Isostatic Coordinate Net
p. 2504 abstract
Modelling the Evolution of Eigenstrains and Residual Stresses During Wall Deposition on a Substrate by Wire-Arc Surfacing
p. 2516 abstract
Modeling the Stability of a Cylindrical Hydrodynamic Suspension
p. 2531 abstract
External and Internal Factors Affecting the Stress-Strain State of a Ceramic Shell Mold During the Solidification of a Steel Casting
p. 2542 abstract
The Influence of Deformation Anisotropy on the Stress State of Metals During Plastic Deformation
p. 2552 abstract
Dynamics of Rotating Magneto-Thermoelastic Systems under Thermal Stress and Double Porosity
p. 2559 abstract
A Novel Model of Ramp Type Heating and Electromagnetic Field on Waves Propagation in a Semiconductor Nanostructure Thermoelastic Solid
p. 2575 abstract
Assessment of the Instability of Conical Pipes Conveying Hot Flow Subjected to Different Boundary Conditions
p. 2592 abstract
Estimation of Temperature in Biological Tissue Using the Atangana–Baleanu Fractional Model Caused by Laser Irradiation
p. 2605 abstract
A Study on a Novel Photothermal without Energy Dissipation Model in Semiconductor Materials
p. 2617 abstract
Split Hopkinson Pressure Bar Experiment and Distinct Element Research on Frozen Soil under Passive Confining Pressure
p. 2631 abstract
Evaluation of Constitutive Models for AA2024 Aluminum Alloy: Insights from Tensile and Rastegaev Compression Tests
p. 2648 abstract
Application of the Fractional Natural Decomposition Method to Hyperbolic Fractional Thermoelasticity
p. 2660 abstract
Generalized Thermoelastic Diffusion Using the Eigenvalue Technique Due to Pulse Heat Flux
p. 2682 abstract
Penetration Mechanics of Finite-Thickness Aluminum Alloy Plates: A Review of High-Strain-Rate Behavior and Predictive
p. 2695 abstract
Machine Learning Prediction on the Stress Intensity Factor for Multiple Edge Cracks in Coatings under Arbitrarily Varying Loads
p. 2763 abstract
Influence of Boundaries on the Dispersion of Rayleigh Waves in a Functionally Graded Pre-Stressed Orthotropic Substrate
p. 2781 abstract
Shear Wave Propagation in Inhomogeneous Multi-Layered Elastic Cylinders between Winkler Foundations
p. 2800 abstract
Nonlinear Dynamics and Kinematic Accuracy Reliability Analysis of Planar Multilink Mechanisms with Multiple Irregular Wear Clearances
p. 2814 abstract
Investigation on Transient Viscothermoelastic Waves in a Half-Space due to Instantaneous Thermal Point Heat Sources via Moore-Gibson-Thompson Heat Conduction Model
p. 2841 abstract
Fractional Three-Phase-Lag Heat Transfer Model for Analyzing Perfect Conducting Thermelastic Hollow Cylinder
p. 2858 abstract
Strike-Slip Dislocation in Two Perfectly Coupled Orthotropic and Transversely Elastic Half-Spaces
p. 2874 abstract
A Cut NURBS Element Method for the Isogeometric Analysis of Arbitrary Complex-Cutouts Laminate Reissner-Mindlin Plates
p. 2893 abstract
Investigation on Dynamic Behavior of a Porous FGM Sandwich Doubly Curved Plate under Multiple Blast Loads
p. 2915 abstract
Seismic Response Analysis of Quasi-Saturated Saturated Soil Site under Plane P-Wave Incidence
p. 2934 abstract
Two Dimensional Non-Local Couple Stress Micropolar Thermoelasticity in Orthotropic Medium with Void using Eigen Value Approach
p. 2946 abstract
An Adaptive Smoothing RRT Method for Path Planning of Concentric Cable-Driven Manipulators
p. 2962 abstract
Study on the Guiding Law of Holes on the Crack Propagation Behavior under Impact Load
p. 2980 abstract
Dynamics Characteristics Analysis of Multi-Link Mechanism Considering Various Disturbance Factors
p. 3000 abstract
A Review of Static and Dynamic Analysis in Functionally Graded Materials with Material Nonlinearities
p. 3031 abstract
A Study of Fundamental Solution and Green’s Function in Orthotropic Micropolar Photothermoelastic Media Based on Moore-Gibson-Thompson Model
p. 3058 abstract
Dual Phase Lagging in Piezothermoelastic Nanobeam Resonator Utilizing Nonlocal Modified Couple Stress Theory
p. 3095 abstract
Photothermal Response of a Cracked Semiconductor Strip Under Antiplane Shear Deformation
p. 3118 abstract
Wave Propagation Analysis in Thermoelastic Media Using Modified Couple Stress and Higher-Order Phase-Lag Approaches
p. 3132 abstract
Study on the Scale Effect of Nonlinear Vibration of Axial Motion Micro/Nano Plates Based on Nonlocal Strain Gradient Theory
p. 3145 abstract
Evaluation of Equivalent Simulation Models for 5.8 mm Typical Small-Caliber Firearm
p. 3168 abstract
Global Sensitivity Analysis of Wave Behavior in Rotating Solids with Laser-Induced Thermal and Stress Effects
p. 3181 abstract
Kinematic Analysis and Spatial Simulation of Parallel Mechanism Comparators
p. 3205 abstract
Size-Dependent Buckling and Free Vibration of Functionally Graded Graphene Origami-Enabled Auxetic Metamaterial Microbeams in a Thermal Environment Based on Modified Strain Gradient Theory
p. 3221 abstract
A Novel Model for Obtaining Equivalent Stress Distribution in Plastic Zone on Metallic Materials via Spherical Indentation
p. 3244 abstract
Influence of Interlayer Mixing Ratio on the Anti-Penetration Performance of kevlar/uhmwpe Target Plate
p. 3258 abstract
Study on Mechanical Properties and Energy Absorption of PA12 Topological Lattice Structures Prepared by Selective Laser Sintering
p. 3271 abstract
A Comparative Study of Dynamic Response Formed in Different Bullets Impacting on Ballistic Gelatine with Soft Armour
p. 3287 abstract
Magneto-Thermoelastic Response of a Rotating Medium with Double Porosity under Initial Stress
p. 3303 abstract
Stress Analysis of an Irregular Fiber-Reinforced Layer Imperfectly Bonded to a Transversely Isotropic Half-Space Subjected to Moving Load
p. 3322 abstract
Fatigue Test in Aviation Pipelines Typical Components and Minor Cracks Analysis
p. 3339 abstract
An Elastic Strip with a Transverse Stiffener: An Exact Solution
p. 3350 abstract