Vol. 61, No. 2, 2026
Effect of Magnetic Field on Photothermal Waves with Diffusive Thermoelastic Semiconductor Media
p. 71 abstract
Effect of Magnetic Field on the Non-Local Thermoelastic Medium with Diffusion
p. 72 abstract
Variable Structural-Function Derivative Framework for Visco-Elasto-Plastic Creep: Constitutive Modeling and Quantitative Assessment
p. 73 abstract
The Influence of Prestress on the Ballistic Performance and Dynamic Failure of Alumina Ceramic
p. 74 abstract
Investigation and Analysis of the Mechanical Properties of Variable Stiffness Particle Assembly Structures
p. 75 abstract
Multi-Objective Optimization Design and Impact Protection Performance Verification of BCCH-Structured Knee Pad Liner Based on 3D-Printed Foamed TPU
p. 76 abstract
Impact of Boundary Conditions on Electro-Mechanically Loaded Rectangular Plate for MEMS Application
p. 77 abstract
Three-Dimensional Consolidation of Unsaturated Soil with Anisotropic Permeability Considering Mixed Drainage Boundary Condition
p. 78 abstract
Wave Interaction Analysis for Voided Micropolar Viscoelastic Tissue at a Stiff Surface
p. 79 abstract
Calibration of Johnson-Cook Constitutive and Fracture Model Parameters for SA508-3 Steel via a Hybrid Experimental-Numerical Methodology
p. 80 abstract
Free Axisymmetric Vibration of Two-Dimensional Dodecagonal Quasicrystal Cylinders
p. 81 abstract
Analysis of Nonlocal Piezo-Thermoelastic Media with Memory Effects under the Moore–Gibson–Thompson Model
p. 82 abstract
Vibration Characteristics of Rotating Pre-Twisted Porous P-FGM and E-FGM Cylindrical Shells with Bi-Directional Thickness Variation under Nonlinear Temperature Gradient
p. 83 abstract
Coupled Thermal–Moisture–Mechanical Response in Nonlocal Infinite Rectangular Strips: A Memory-Dependent Fractional Approach
p. 84 abstract
Transient Coupled and Uncoupled Hygrothermal Stress Analysis of a Hollow Functionally Graded Magneto-Electro-Elastic Cylinder
p. 85 abstract
CDEM-Based Simulation of Fracture Propagation Characteristics during Variable-Rate Hydraulic Fracturing in Tight Reservoirs
p. 86 abstract
The Effect of Interfacial Angle on CFRP Interlaminar Toughness under DCB&ENF tests
p. 87 abstract
A Multi-Material Point Lattice Model for Progressive Damage in Composite Materials
p. 88 abstract
A Decade of Developments in the Mechanical Performance of Cold-Formed Steel Members
p. 89 abstract
Analytical Modeling of the Thermoelastic Diffusion Problem Using the Atangana–Baleanu Fractional Operator under Pulsed Heat Flux
p. 90 abstract
Restricted 3-body Problem with 1-PN and Solar Sail Effects
p. 91 abstract
Nonlocal Thermoelastic Analysis of Functionally Graded Media with a Spherical Cavity: A Modified Moore–Gibson–Thompson Model Coupled with Green–Naghdi Theory Incorporating Small-Scale Effects
p. 92 abstract
Band-Gap Characteristics of a Periodic Spiral Beam for Wide-Range Vibration Isolation in Limited Space
p. 93 abstract
Experimental and Numerical Investigation on Directional Rigidity of Face Modified Lattice Structures
p. 94 abstract
SH Wave Propagation in Viscoelastic Sandwich Layer-Substrate Systems with Imperfect Interfacial Bonding: A Spring-Membrane Model Approach
p. 95 abstract
Polynomial Approximations for the Energy Forms of a Hemitropic Micropolar Solid by Integer Rational Invariants
p. 96 abstract
Random Vibration and Dynamic Analysis of Fractured Nanobeams Using a Stress-Driven Bi-Helmholtz Nonlocal Finite Element Framework
p. 97 abstract
Thermoelastic Modeling of Functionally Graded Media Incorporating Memory-Dependent Heat Conduction and Nonlocal Effects
p. 98 abstract
A Modified e–p Curve Model for Red Clay Considering Nonlinear Rebound
p. 99 abstract
Vibrational Response of a Lined Tunnel in a Saturated Frozen Soil Half-Space to Seismic P-Wave
p. 100 abstract
A Macroscopic Framework for Evaluating Material Inhomogeneity: Probabilistic Initial Damage and Its Application to a Forged Ti-60 Disk
p. 101 abstract
Analysis and Optimization of Compressive Mechanical Properties of Thin-Walled Square Tube Filled with Three-Dimensional Negative Poisson’s Ratio Structure
p. 102 abstract
A Moore–Gibson–Thompson Thermoelastic Model for Spatio-Temporal Nonlocalized Porous Hollow Cylinders with Memory-Dependent Heat Conduction
p. 103 abstract
Transverse Vibration Frequencies to Non-Homogeneous Material Stepped Beams Equipped with Added Masses
p. 104 abstract
Chaotic Identification and Wear Characteristics Analysis of a High-Speed Carton-forming Mechanism with Multiple Clearances
p. 105 abstract
Progress and Challenges in Applying the Direct Strength Method to Cold-Formed Steel Design
p. 106 abstract
Thermoelastic Effects on Antiplane Shear Deformation in Porous Media
p. 107 abstract
Exact Solution for Simply Supported Functionally Graded Electro-Thermo-Elastic Porous Plates via the Pseudo-Stroh Formalism
p. 108 abstract
Symmetric Memory-Dependent Derivative for Advanced Thermoelastic Diffusion Modeling
p. 109 abstract
Thermo-Dynamic Behaviour of Hybrid Sandwich Plates Featuring Functionally Graded Face Sheets and Re-Entrant Auxetic Cores: Parametric Design Evaluation
p. 110 abstract
Dynamic Modeling and Performance Evaluation of Two-Directional And Ultra-Low Frequency Enhanced Elliptical Gauge-Inspired Piezoelectric Energy Harvester
p. 111 abstract
Photothermal Thermoelastic Waves in a Pre-Stressed Double-Porosity Semiconductor Incorporating Two-Temperature Heat Transfer
p. 112 abstract
Post-Buckling of Tapered Functionally Graded Bumped Doubly Curved Shells under Thermal Loads with Variable Thickness Using Isogeometric Analysis
p. 113 abstract
Improved Statistic Damage Constitutive Model Based on SMP Yield Criterion of Limestone under Thermal-Mechanical Coupling
p. 114 abstract
Analysis of Dynamic Response in Vehicle-Track System Considering Frictional Heat
p. 115 abstract
Dynamic Characteristics and Reliability of Multi-Link Mechanisms Considering Hybrid Clearances under Deterministic Parameters
p. 116 abstract
Love Wave Propagation in Heterogeneous Geophysical Media with a Size-Dependent Micropolar Half-Space
p. 117 abstract
The Ricci Tensor and the Structure of the Beltrami–Mitchell Equations
p. 118 abstract
On the Ishlinsky Commutativity Relations in Plasticity Theory of Perfect Plasticity
p. 119 abstract
Parametric Optimization of an Auxetic Star-Shaped Structure using the Grey Wolf Optimizer (GWO) Algorithm
p. 120 abstract
Comparison of the Crystal Plasticity RVE and Full-Scale Model for Investigation of Uniaxial Tensile Mechanical Behavior
p. 121 abstract
Numerical Study and Optimal Designs about Mechanical Properties of Semi-Reentrant Structures
p. 122 abstract
Influence of the Jacket on Projectile Penetration into Typical Semi-infinite Metallic Targets
p. 123 abstract
Evolution of the Rotational Movement of a Three-Axis Satellite with Ball Damper in Circular Orbit
p. 124 abstract
On Regularities of Contact Interaction of Surfaces with Regular Microrelief (Three-Dimensional Problem)
p. 125 abstract
Reconstruction of Accelerations Domain on the Basis of Limited Array of Measured Accelerations and Unknown External Force Excitation
p. 126 abstract
Mechanical and Structural Properties of GaN/AlN/GaN/AlN and AlN/GaN/AlN Heterostructures on SiC/Si(111) and Al2O3 Substrates
p. 127 abstract
Experimental Study of Penetration Resistance of Composite Layered Structures Including Flexible Auxetic Metamaterials
p. 128 abstract
Occurrence of Strong Shocks in the Hill-Type Hyperelastic Media
p. 129 abstract
Classical Solution of a Mixed Problem of Vibrations of a Nonlinear Timoshenko Beam
p. 130 abstract
Development of Sampling Surfaces Method for Solving Three-Dimensional Problems of Mechanics of Shells
p. 131 abstract
Kinematically Optimal Control of Reorientation of Solid Body (Spacecraft) Taking Account of The Loading of Construction, and Analytical Approximate Solution of the Dynamic Problem of Rotation
p. 132 abstract
Mathematical Models of the Wave Solid-State Gyroscope Resonator Dynamics for Objects Moving at High Angular Velocities
p. 133 abstract
The Analytical Solution of a Problem of Hollow Cylinder Torsion Taking Account of the Postcritical Deformation of Material and Loading System Stiffness
p. 134 abstract
On the Implementation of the Ritz Method in the Problem of Stability Loss of an Infinite Plate with a Circular Hole under Uniaxial Tension
p. 135 abstract
On the Applied Theory of Stretching and Bending of a Rectangle and Its Applications to Coefficient Inverse Problems
p. 136 abstract