Contents

Mechanics of Solids


Vol. 60, No. 2, 2025


On the Sensitivity of Equilibria to the Method of Realization of Unilateral Constraints with Piecewise Smooth Boundaries

A. A. Burov p. 795  abstract

Solutions of Periodic and Doubly Periodic Bending Problems of a Thin Piezo Plate with Holes or Cracks

S. A. Kaloerov, and A. V. Seroshtanov p. 812  abstract

A New Method for Determining the Buckling Resistance in the Nonlinear Range of Strains for a Column Supported by Rotational Stiffeners

V. V. Chistyakov, and S. M. Soloviev p. 825  abstract

Multifunctional Shuttle for Processing Small Diameter and Ultra-Thin Semiconductor Wafers

N. A. Djuzhev, E. E. Gusev, M. Y. Fomichev, P. S. Ivanin, I. V. Kushnarev, and V. A. Bespalov p. 839  abstract

On Various Functions Called Entropy when Using Classical Mechanics

A. M. Shmatkov p. 848  abstract

Mechanics of Blood Flow and Wall Deformation in the Abdominal Aorta

N. A. Verezub, D. V. Gandilyan, D. S. Lisovenko, V. V. Pantushov, and A. I. Prostomolotov p. 857  abstract

Evolution of the Single-Wall Carbon Nanotubes Bundle Structure under Compressive Deformation

O. V. Andrukhova, A. A. Ovcharov, T. V. Andrukhova, and A. Y. Morkina p. 872  abstract

Generalized Cesaro Formulas in 3D and 4D Elasticity Theories

S. A. Lurie, and P. A. Belov p. 883  abstract

Modeling of Hydraulic Autofrettage of Thick-Walled Cylindrical Shells Taking into Account Elastoplastic Anisotropy Caused by the Bauschinger Effect

S. I. Feoktistov, I. K. Andrianov, and Htet Lin p. 891  abstract

On the Solution of the Problem of Axial Compression of an Elastic Cylinder with Specified End Displacement Conditions

A. L. Popov, A. O. Vatulyan, D. A. Chelyubeyev, and V. I. Bukhalov p. 912  abstract

Nonlinear Acoustic Waves in Hyperelastic Rods

S. V. Kuznetsov, and S. G. Saiyan p. 923  abstract

Problems of Modern Control Theory and Optimization of Dynamics of Systems with Distributed Parameters in Mechanics and Physics

T. N. Bobyleva, and A. S. Shamaev p. 932  abstract

On Accounting for Surface Effects in Bending of Ultrathin Plates

K. B. Ustinov p. 940  abstract

On the Influence of Viscous Filler on the Impact Resistance of Flexible Metamaterials with Auxetic Properties

S. Yu. Ivanova, K. Yu. Osipenko, N. V. Banichuk, and D. S. Lisovenko p. 958  abstract

Bending Vibrations of a Pipeline on Elastic Supports with Moving Liquid

A. G. Khakimov, and A. A. Yulmukhametov p. 965  abstract

A Semi-Analytic Method for Computing Cross-Crack Stress Intensity Factor in Finite Plate under Thermal-Mechanical Coupling

Qingqing Shen, Lvlin Xiang, Qiyun Wang, Jiajun Zeng, Wei Yi, Dianyi Huang, and Jinshan Lei p. 973  abstract

Compressive Mechanical Property and Multi-objective Optimization of Gradient foam Aluminum Sandwich panel Based on Stochastic Pore Model

Y. A. N. G. Kun, Y. A. O. Yuan, S. H. A. Yunjie, and W. A. N. G. Yibo p. 989  abstract

Numerical and Experimental Investigations on the Dynamic Behaviors of a Bolted Joint Dual-Rotor System with Inner Raceway Defect of Inter-Shaft Bearing

Y. Q. Li, X. L. Cai, and C. M. Wen p. 1012  abstract

Fractional Thermoelastic Diffusive Half-Space with Variable Thermal Conductivity and Diffusivity

Jing He p. 1033  abstract

A Study of Thermal Damages in Living Tissue Based on Nonequilibrium Bioheat Transfer Due to Laser Irradiation

Zuhur Alqahtani, Ibrahim Abbas, Alaa A. El-Bary, and Areej Almuneef p. 1047  abstract

Experiment and FDM-DEM Simulation of Impact Dynamic Mechanical Behavior of Frozen Soil after Freeze-Thaw Cycles

Lijun Zhang, Bin Li, Zhiwu Zhu, Zhengqiang Cheng, Qingjun Geng, and Hongyan Chu p. 1060  abstract

Analysis of the Wear Characteristics of the Moving Parts of Compound Swing Jaw Crusher with Cylindrical Hinge Clearance

Zhihong Jiang, Xiaoke Wang, Chengkun Zhang, and Shuhao Hao p. 1072  abstract

Nonlinear Bending Study of Size-Dependent Magneto-Electro-Elastic Laminated Nanobeams under Flexomagnetoelectric Effect

Yu-fang Zheng, Bo-wen Liu, Feng Wang, and Chang-ping Chen p. 1087  abstract

The Nonlocal Effects on Thermal Damage in Living Tissue Due to an Intense Moving Heat Source

Areej Almuneef, Ibrahim Abbas, Alaa A. El-Bary, and Zuhur Alqahtani p. 1105  abstract

Transient Response of a Hollow Cylinder with Nonlocal Effect and Fractional Thermoelasticity

Jing He p. 1117  abstract

Nonlinear Dynamic Analysis of Vehicle System under Road Excitation Using a Four-Degree-of-Freedom Model

Xiaochuan Zhao, Quan Yuan, Qian He, and Lin Lang p. 1130  abstract

Effect of Cutout and Initial Geometrical Imperfection on Nonlinear Transient Response of Functionally Graded Material Folded Plate

Shashank Pandey p. 1143  abstract

Improving the JAYA Algorithm for High-Cost Computing Applications

Zhang Feng, Chu Guangyuan, Zhang Jiamu, and Jin Peng p. 1157  abstract

Structural Thermo-Electromechanical Transient Memory-Dependent Dynamic Response of Multi-Layered Piezoelectric Laminated Composites Based on Cattaneo-Type Piezoelectric Thermoelasticity with Fractional Dual-Phase-Lag Heat Conduction Model

Yuhao Wang, and Chenlin Li p. 1173  abstract

Covariance Matrix Adaptation Evolution Strategy for Optimizing Truss Structures with Discrete Variables

O. El Mrimar, Z. El Haddad, O. Bendaou, and B. Samoudi p. 1194  abstract

Sound Wave Propagation in Multilayered Two-dimensional Quasicrystal Cylindrical Shells with Internal and External Airflow

G. B. He, and Z. J. Gao p. 1208  abstract

Effect of Ply Stacking Sequence and Projectile’s Nose Shape on Ballistic Response of Unidirectional CFRP Composite Laminates

Neel Gharde, Deepu Kumar Singh, and Gaurav Tiwari p. 1224  abstract

Study on Plastic Deformation Characteristics of Hollow Cylindrical Roller of Turntable Bearing

F. Wei, H. B. Liu, Y. Y. Liu, Y. P. Sun, and F. Z. Shi p. 1238  abstract

Static Analysis of Euler-Bernoulli Beam with Arbitrary Number of Oblique Cracks: a Semi-Analytical Method

Jiping Ge, Yibin Gou, and Tianyu Wang p. 1253  abstract

Analysis of Mechanical Properties of Flexoelectric Nano-plates Based on Nonlocal Strain Gradient Theory

Y. S. Li, A. Q. Li, S. S. Zhou, R. M. Zhang, G. F. Wei, F. Ren, J. W. Qiao, and S. J. Zhou p. 1272  abstract

Investigation of Uniqueness, Reciprocity Theorems and Deformation in Multi-Phase-Lags Anisotropic Thermoviscoelastic Diffusion Model

Saurav Sharma, Sangeeta Devi, Rajneesh Kumar, Ibrahim S. Elshazly, Imed Bachar, and Kh. Lotfy p. 1289  abstract

Nonlinear Dynamic Behavior of Faulty Planetary Gear System

Guang Li, Junhui Zhang, Yangcheng Zhang, Yongliang Li, and Yan Wang p. 1314  abstract

Influence of the Internal Carotid Arteries Stenosis on the Hemodynamics of the Circle of Willis Communicating Arteries: a Numerical Study

D. V. Ivanov, and A. V. Dol p. 1329  abstract

Analysis of the Effect of Nonlocal Factors on the Vibration Characteristics of Nonlocal Euler-Bernoulli Beams under Rotational Inertia on Viscoelastic Pasternak Foundations

Guobing Wang, Meiling Hua, Shixian Ren, Zhiwei Du, and He Zhang p. 1340  abstract

Study on the Bending Properties and Failure Behaviors of Scarf-Repaired Honeycomb Sandwich Structures Considering the Optimal Design of an Additional Layer

Xu Zhang, Shuaiqiang Zhang, Yan Fang, and Wei Li p. 1368  abstract

Analysis of a non-Homogeneous Hygro-Thermoelastic Layer Immersed in Non-Viscous Fluid

Praveen Ailawalia, Anchal Sharma, A. M. S. Mahdy, E. S. Elidy, and Khaled Lotfy p. 1387  abstract

Eringen’s Non-Locality and Unified Exponential Operators Induce Thermoelasticity in a Cylindrical Cavity under Thermal Loads

Nikita Karde, Dilip Kamdi, Vinod Varghese, and Nitin Chandel p. 1404  abstract

Modelling the Non-Linear Dynamic Behaviour of a Laminated Composite Beam Made of Shape Memory Alloys Using the Multiple Time Scale Method

Rabaï Korondo, C. A. Moubeke, R. P. Lemanle Sanga, C. Adoukatl, and G. E. Ntamack p. 1427  abstract

Analysis of Creep Crack Growth Based on New Multiaxial Ductility Factor and Creep-Damage Model

Dongquan Wu, Wenjie Wu, Enze Wu, Lianpeng Lu, and Dizhi Guo p. 1446  abstract

A Review on the Buckling Behavior of Cold-Formed Thin-Walled Steel Members

Zonglai Peng, Yuhong Yang, Laifu Zhang, Wei Xiong, and Yong Cai p. 1469  abstract