Vol. 31, No. 4, 2022
Heat Transfer Enhancement on Surface Modified via Additive Manufacturing during Pool Boiling of Freon
p. 551 abstract
Experimental Study of Thermal Conductivity of Novec 7000 in Vapor Phase
p. 563 abstract
Development of Multivariable Triangulation Method for Diagnostics of Icing of Wind Turbine Blades
p. 567 abstract
Dissociation and Combustion of Gas Hydrates
p. 573 abstract
Numerical Simulation of the Effect of Evaporation of Liquid Droplets on Turbulence and Heat Transfer in a Droplet-Laden Flow behind a Backward-Facing Step
p. 580 abstract
Experimental Study of Kerosene Combustion with Steam Injection in Laboratory Burner
p. 589 abstract
Experimental Study of Heat Transfer in FC-72 Fluid Rivulet over Heated Vertical Plate
p. 603 abstract
Problems of Identification of Distributed Parameter Models of Heat Transfer. Part 1
p. 609 abstract
Problems of Identification of Distributed Parameter Models of Heat Transfer. Part 2
p. 641 abstract
Influence of High-Frequency Pulsations of Liquid on Heat and Mass Transfer in Wide Minichannel during Liquid Flow Boiling
p. 655 abstract
On Determination of Temperature of Attainable Water Superheat: Issues of Experiment Procedure
p. 664 abstract
Geometric Optimization of T-shaped Fin and Inverted Fin Based on Minimum Entropy Generation Objective
p. 668 abstract
Dynamic Characteristics of Thermopiles
p. 688 abstract
Effect of Mixing in Test Section on Hydrate Synthesis via Explosive Boiling of Liquefied Hydrate-Forming Gas in Water with Addition of SDS during Decompression
p. 696 abstract
Non-Similar Analysis of Nanofluids Flows under the Consequences of Mixed Convection with Lorentz Forces over Stretching/Shrinking Surface
p. 704 abstract
Pool Boiling Heat Transfer Performance of R-134a on Microporous Al Surfaces Electrodeposited from AlCl3/Urea Ionic Liquid
p. 720 abstract