Contents

Journal of Applied Mechanics and Technical Physics

Vol. 64, No. 5, 2023

STUDY OF SELF-ORGANIZED DUST CHAINS WITH ACCOUNT FOR ION DRAG

M. V. Salnikov, A. V. Fedoseev, and G. I. Sukhinin p. 737  abstract

GAS-JET SYNTHESIS OF DIAMOND COATINGS ON SILICON SUBSTRATES FROM AN H2 + CH4 + Ar MIXTURE ACTIVATED IN A MICROWAVE DISCHARGE

A. A. Emelyanov, M. Yu. Plotnilkov, N. I. Timoshenko, and I. B. Yudin p. 748  abstract

FERROMAGNETIC-ENHANCED LOW-PRESSURE INDUCTIVE DISCHARGE FOR PLASMA PROCESSING

M. V. Isupov, and V. A. Pinaev p. 757  abstract

MEASUREMENT OF SILICON MELT TEMPERATURE DURING ELECTRON BEAM REFINING

V. G. Shchukin, and V. O. Konstantinov p. 767  abstract

STRUCTURING OF COPPER SURFACE BY GLOW DISCHARGE PLASMA

A. V. Petrova, and A. I. Safonov p. 772  abstract

INFLUENCE OF CURRENT DENSITY ON THE STRUCTURE OF AMORPHOUS SILICON SUBOXIDE THIN FILMS UNDER ELECTRON-BEAM ANNEALING

E. A. Baranov, V. A. Nepomnyashchikh, V. O. Konstantinov, V. G. Shchukin, I. E. Merkulova, A. O. Zamchiy, N. A. Lunev, V. A. Volodin, and A. A. Shapovalova p. 778  abstract

GAS AND GAS–DROPLET JET FLOWS INTO VACUUM

V. N. Yarygin, V. G. Prikhodko, and I. V. Yarygin p. 784  abstract

SPECIFIC FEATURES OF FORMATION OF SUPERSONIC JETS OF RAREFIED GASES UNDER CONDITIONS OF DEVELOPED CONDENSATION

K. A. Dubrovin, A. E. Zarvin, and A. K. Rebrov p. 793  abstract

SUPERSONIC GAS FLOW FROM AN ANNULAR NOZZLE INTO A LOW-PRESSURE CHAMBER WITH AN AXIAL CHANNEL: KINETIC AND CONTINUUM SOLUTIONS

A. A. Morozov, I. B. Yudin, A. G. Abramov, P. A. Skovorodko, and R. G. Sharafutdinov p. 805  abstract

SIMULATION OF WETTABILITY OF NANOTEXTURED SURFACES BY MOLECULAR DYNAMICS

V. A. Andryushchenko, K. V. Artishevskii, and D. V. Smovzh p. 814  abstract

SCALING LAWS IN DIRECT METAL DEPOSITION OF CERMET TRACKS

A. A. Golyshev, and N. A. Sibiryakova p. 821  abstract

UNSTEADY AND QUASI-STEADY MODES OF THE FLOW OVER AN INTAKE TESTED IN A HOTSHOT WIND TUNNEL

Yu. P. Gounko, and I. V. Kavun p. 827  abstract

UNSTEADY FLOW IN A RESERVOIR WITH A MAIN FRACTURE CROSSING AN INJECTION OR PRODUCTION WELL

A. M. Il’yasov, and V. N. Kireev p. 840  abstract

NUMERICAL SIMULATION OF THE DEVELOPMENT OF PERTURBATIONS INDUCED BY A PERIODIC HEAT SOURCE IN A SUPERSONIC BOUNDARY LAYER

A. I. Kutepova, D. V. Khotyanovsky, and A. A. Sidorenko p. 853  abstract

DESIGN AND EXPERIMENTAL ANALYSIS OF HEAT TRANSFER PERFORMANCE OF A TWO-PHASE CLOSED THERMOSYPHON SYSTEM

M. S. Elmosbahi, M. Hamdi, and M. Hazami p. 858  abstract

EFFECT OF A LINEAR PARAMETER ON THE BRITTLE FRACTURE OF AN ELASTIC LAYER WITH A CIRCULAR HOLE

V. V. Glagolev, and A. A. Markin p. 871  abstract

FREE VIBRATION ANALYSIS OF A BIDIRECTIONAL FUNCTIONALLY GRADED CARBON NANOTUBE REINFORCED COMPOSITE BEAM

M. Pang, S. M. Zhou, B. L. Hu, and Y. Q. Zhang p. 878  abstract

SHOT-PEENING-INDUCED RESIDUAL STRESSES IN POWDER COATINGS PRODUCED BY SPRAYING

V. Yu. Ul’yanitskii, D. K. Rybin, and A. Yu. Larichkin p. 890  abstract

PREDICTION OF DURABILITY OF A FIBER BUNDLE UNDER UNIAXIAL TENSION ON THE BASIS OF THE THERMAL-FLUCTUATION MODEL OF ITS BRITTLE FRACTURE

V. V. Shevelev p. 902  abstract

ASYMPTOTIC ANALYSIS OF THE PROBLEM OF EQUILIBRIUM OF AN INHOMOGENEOUS BODY WITH HINGED RIGID INCLUSIONS OF VARIOUS WIDTHS

N. P. Lazarev, and V. A. Kovtunenko p. 911  abstract

ULTRASONIC AND METALLOGRAPHIC STUDY OF THE HEAT-AFFECTED ZONE OF A CARBON STEEL WELDED JOINT UNDER PLASTIC DEFORMATION AND FATIGUE

A. V. Gonchar, and A. A. Solov’ev p. 921  abstract

GADOLIN PROBLEM OF ASSEMBLING A PRESTRESSED TWO-LAYER PIPE

A. A. Burenin, and A. V. Tkacheva p. 929  abstract