Vol. 16, No. 6, 2025

Inorganic Materials: Applied Research

MATERIALS FOR AVIATION AND SPACE ENGINEERING

Technological Features of Impregnation of Textile Materials in the Creation of a Radiotransparent Composite

E. R. Zhdanov, A. V. Volkov, A. V. Kryukov, D. S. Stepynin, and O. S. Kharina p. 1603 abstract

Study of Texture Change Due to Bending of Aluminum Alloy Sheets

D. N. Klepov, E. V. Aryshensky, Ya. A. Erisov, S. V. Konovalov, and D. Yu. Rasposienko p. 1607 abstract

The Influence of Homogenization Annealing on the Mechanical Properties and Specific Electrical Conductivity of ALTEK Alloys

A. A. Levagina, E. V. Aryshensky, and S. V. Konovalov p. 1613 abstract

A Model of Low-Energy Ions Flow Interaction with Capillary-Porous Materials

I. I. Latfullin, V. S. Zheltukhin, M. F. Shaekhov, and G. R. Rakhmatullina p. 1620 abstract

MATERIALS FOR ENERGY

Hybrid Materials Based on Carbon Fabric Modified with Molybdenum Oxides and Polyvinylpyrrolidone as Electrode Materials for Supercapacitors

A. V. Khramenkova, V. V. Moshchenko, A. S. Gribanova, V. A. Goncharova, and L. G. Miroshnichenko p. 1624 abstract

Thermodynamic Modeling of the Behavior of Am, Pu, Cs Radionuclides during Heating of Reactor Graphite in an Air Atmosphere

N. M. Barbin and S. A. Titiov p. 1631 abstract

On the Most Suitable Equation for Structural Ceramics Fracture Toughness Determination

A. S. Kaygorodov p. 1635 abstract

General Corrosion Behavior of Pure Copper with Optimized Structure Based on Grain Boundary Engineering

P. Kuznetsov, K. Rubtsov, A. Burlachenko, V. Shmakov, and I. Mishin p. 1644 abstract

Smoothing and Structural Hardening of the Additive Surface of the TiZrNb Alloy by Electric Spark Treatment with an AlCaZrY Electrode

S. K. Mukanov, M. I. Petrzhik, V. A. Sheremetyev, and E. A. Levashov p. 1654 abstract

MATERIALS FOR ELECTRONICS

Barrier Height at the Metal/Polymer Interface as an Indicator of the State of the Metal under Cyclic Deformations

A. F. Galiev, M. S. Ishmuhametov, N. S. Bulankin, V. R. Karimov, and D. D. Karamov p. 1661 abstract

Antimony Compounds as Potential Ferroelectric Materials

A. Yu. Milinskiy, I. V. Egorova, and I. N. Nesina p. 1667 abstract

Nonlinear Optical Properties of Liquid Crystals Studied in the Light Transmission Mode

Kh. Sh. Juraev, M. Kh. Egamov, and M. N. Yorov p. 1673 abstract

ZnS:Cu, Br Radiophosphors Microwave Synthesis and Characterization

E. V. Zelenina, A. V. Churkina, I. V. Snyatkov, M. M. Sychov, and V. V. Bakhmetyev p. 1678 abstract

Dielectric Properties of Thiourea Embedded in a Nanoporous Barium Titanate Matrix

A. Yu. Milinsky, S. V. Baryshnikov, and E. V. Stukova p. 1687 abstract

Vibro-Cast Refractories Based on Silicon Carbide

O. D. Pashkov, V. A. Ovechkina, M. A. Pokrovsky, and A. L. Yurkov p. 1692 abstract

Methodology for Heterostructures Quality Checking

O. I. Rabinovich, E. I. Kobzev, V. V. Borichok, A. A. Savchuk, V. O. Atyunin, M. N. Orlova, Yu. V. Osipov, and I. V. Borzykh p. 1695 abstract

Study of Interaction of Granules of Zirconium Dioxide and Carbon with Chlorine in Fluidized Bed Mode

A. Bykov, A. Korobkov, S. Shipulin, S. Travin, P. Mikheev, O. Gromov, and A. Panfilov p. 1701 abstract

Study of the Interaction of Uranium Dioxide Granules Having Different Histories of Origin, with Hydrogen Fluoride

A. Bykov, S. Travin, O. Gromov, and P. Mikheev p. 1707 abstract

Study of the Mechanism of Fluorination of Uranium Dioxide Granules with Hydrogen Fluoride

A. Bykov, S. Travin, O. Gromov, and P. Mikheev p. 1713 abstract

Technology Development for Production of Gallium Nitride Templates on Sapphire Substrate with Reduced Dislocation Density

I. I. Maronchuk, M. V. Mezhennyi, K. V. Lambrianidi, P. S. Rybin, D. D. Sanikovich, A. S. Tarasov, and A. A. Chelny p. 1721 abstract

BIOMEDICAL MATERIALS

Bioactive 52S4.6 Glasses Doped with Magnesium Ions as Promising Materials for Bone Tissue Regeneration

D. N. Grishchenko, O. V. Shevchenko, I. N. Chernenko, and M. A. Medkov p. 1728 abstract

Deformation Structure Evolution during Mechanical Cycling of Nanocristalline TiNi alloy

S. L. Girsova, T. M. Poletika, S. M. Bitter, and Yu. P. Mironov p. 1737 abstract

Effect of Zr and Cu Alloying on the Structure and Electrochemical Properties of TiNi

M. G. Ostapenko, V. O. Semin, S. I. Yuzhakova, F. A. D’yachenko, and K. P. Savkin p. 1743 abstract

Characterization of the Chemistry of the Vancomycin-Containing PLGA-CaP Composite Coatings as Drug Carriers

E. G. Komarova, E. B. Akimova, and E. A. Kazantseva p. 1752 abstract

Phase Composition of Hydroxyapatite Synthesis Products from a Model Solution of Synovia in the Presence of Magnesium and Zinc Ions

O. A. Golovanova p. 1761 abstract

Cryochemical Synthesis of Magnetic Nanoparticles

A. S. Shumilkin, O. I. Vernaya, A. S. Kravchenko, A. V. Shabatin, and T. I. Shabatina p. 1770 abstract

XPS Analysis of Corrosion Products in Ti–50.9 at % Ni Alloy

A. A. Churakova and E. I. Iskhakova p. 1779 abstract

Cryochemical Synthesis of Silver and Zinc Oxide Nanoparticles

A. S. Ryzhkova, O. I. Vernaya, and T. I. Shabatina p. 1791 abstract

The Synthesis, Structure, and Features of Biocomposites Based on Selenite-Substituted Hydroxyapatite and Collagen

S. M. Sipiagina and O. A. Golovanova p. 1795 abstract

RARE AND PRECIOUS METALS, HIGH-PURITY SUBSTANCES

Investigation of the Possibilities for Extracting Strategic Metals from Titanium-Bearing Deposits of Sikhote-Alin Ultrabasic Rocks (Far East, Russia)

V. P. Molchanov p. 1805 abstract

ENERGY SAVING MATERIALS, GREEN TECHNOLOGIES, CATALYSTS

Sol-Gel Synthesis and Characterization of Titanium Dioxide Nanoparticles for Efficient Arsenic Sorption from Aqueous Solutions

I. B. Dorosheva, N. V. Pechishcheva, L. G. Burdina, and A. A. Rempel p. 1810 abstract

SURFACE PHENOMENA AND COATING TECHNOLOGY

Structure and Properties of Functionally Organized Steel-Aluminum Compositions Manufactured by Liquid and Solid Phase Methods

R. S. Mikheev, P. A. Bykov, I. E. Kalashnikov, and L. I. Kobeleva p. 1814 abstract

Damageability of the Surface Layer of V–Ti–Cr Alloy under Successive Exposure to Argon Ions and Pulsed Laser Radiation

I. V. Borovitskaya, S. N. Korshunov, A. N. Mansurova, G. G. Bondarenko, S. V. Simakov, N. A. Vinogradova, A. I. Gaidar, E. V. Matveev, and E. E. Kazilin p. 1821 abstract

Effect of the Low-Energy Ion Flux Generated from a Low-Pressure HF Plasma on the Fatigue and Long-Term Strength of Metals and Alloys

I. S. Abdullin, N. V. Korneeva, K. S. Mastyukov, S. V. Mironov, and A. V. Shestov p. 1828 abstract

Structural and Hysteretic Properties of Oxidized Epitaxial MgO(100)/⁵⁷Fe/Cr Films

I. V. Blinov, M. A. Milyaev, Yu. V. Korkh, T. V. Kuznetsova, D. I. Devyaterikov, A. Yu. Germov, B. Yu. Goloborodsky, R. M. Falahutdinov, and E. V. Osinnikov p. 1833 abstract

Effect of Alloying on the Microstructure and Properties of Molybdenum-Containing Coatings

P. M. Petukhova, E. G. Bushueva, E. A. Pukhova, J. N. Malutina, and V. G. Burov p. 1840 abstract

Effect of Modification of the Surface of VNS-5 Steel Samples by Ion-Plasma Methods on the Fracture Pattern during Fatigue Tests

T. I. Dorofeeva, M. V. Fedorischeva, and V. P. Sergeev p. 1847 abstract

Patterns of Electrophoresis of Colloidal Solutions with a Metallic Dispersed Phase on the Example of Silver

A. M. Amdur, S. A. Fedorov, V. V. Pavlov, N. V. Pechishcheva, V. S. Kurmacheva, I. A. Vlasov, and V. V. Yurak p. 1851 abstract

Research of the Influence of Treatment in a Low-Energy Ions Flow in Argon on the Characteristics of a Polyurethane Membrane

I. F. Sayfutdinova, I. A. Chikleev, and A. A. Azanova p. 1858 abstract

The Impact of Pulsed Helium Ion-Plasma Flows and Electron Beams Generated in the Plasma Focus Device on a Tungsten Single Crystal

V. N. Pimenov, I. V. Borovitskaya, G. G. Bondarenko, A. S. Demin, S. V. Latyshev, E. V. Morozov, S. A. Maslyaev, A. B. Mikhailova, I. S. Monakhov, A. I. Gaidar, and I. P. Sasinovskaya p. 1863 abstract

FUNCTIONAL MATERIALS

Development of a New Generation Water-Soluble Photosensitizer Based on Chlorin e6 with Platinum

M. V. Belobeletskaya, M. A. Medkov, O. V. Shevchenko, and I. N. Chernenko p. 1874 abstract

Formation of Rhombohedrons in the Copper Structure after Drawing and Equal Channel Angular Pressing

N. V. Zemlyakova and S. O. Rogachev p. 1883 abstract

Prediction of the Phase Composition and Properties of CoCrFeMnNi Alloy

I. A. Panchenko, V. S. Panova, A. N. Gostevskaya, V. A. Kuznetsova, and S. V. Konovalov p. 1889 abstract

Investigation of Palladium(II) Binding with Chlorin e6 and Evaluation of Safety for Use in an “In Vitro” Model

O. V. Shevchenko, M. V. Belobeletskaya, M. A. Medkov, K. A. Yurieva, and P. A. Zadorozhny p. 1896 abstract

Kinetics of Lüders Bands in Al–Mg Alloy with Structural Heterogeneity

D. V. Orlova, V. V. Gorbatenko, and G. V. Schlyakhova p. 1907 abstract

Determination of Triboloading Conditions of Composite Material Based on AO20-1 Alloy

P. A. Bykov, I. E. Kalashnikov, L. I. Kobelva, I. V. Katin, and R. S. Mikheev p. 1913 abstract

Quartz Ceramics Produced by Slip Casting with Granules

O. D. Pashkov, D. V. Kharitonov, D. A. Mikhalevsky, and K. V. Pechenkin p. 1918 abstract

Application of Modern Provisions of the Kinetic Theory of Strength to Solve Problems of High-Precision Prediction of the Defining Characteristics of Composites in Extreme Conditions

E. L. Gusev and V. N. Bakulin p. 1922 abstract

Synthesis of Methylated Silica from Mineral Silicate Raw Materials

Y. O. Velyaev, D. V. Mayorov, K. A. Pimenov, H. C. Silva, and Saif Alauldeen Ridha p. 1927 abstract

Polycrystalline Ni–Zr Alloys: Thermal Expansion, Density, Thermal Diffusivity and Thermal Conductivity

V. A. Bykov, D. A. Yagodin, T. V. Kulikova, and S. Kh. Estemirova p. 1935 abstract

Effect of Tungsten Carbide on the Wear Resistance of Modified Layers in 0.12C–18Cr–9Ni–1Ti Steel

V. E. Andryushkina, E. G. Bushueva, E. A. Pukhova, A. I. Popelyukh, and V. G. Burov p. 1945 abstract

Mechanical Properties and Structure of High-Entropy Alloys Сo₂₀Cr₂₀Fe₁₀Mn₃₀Ni₂₀ and Co₂₀Cr₂₀Zr₉Mn₃₁Ni₂₀

V. K. Drobyshev, S. V. Konovalov, I. A. Panchenko, and Xizhang Chen p. 1952 abstract

Kinetiсs of TiO₂ Samples Calcination

T. V. Kulikova, N. V. Pechishcheva, D. A. Kovalenko, V. A. Bykov, L. G. Burdina, and A. A. Belozerova p. 1959 abstract

Fe₃O₄ Formation by Ball Milling of Fe₂O₃ Powder

E. V. Nikolaev, E. N. Lysenko, A. P. Surzhikov, and V. D. Elkin p. 1962 abstract

Synthesis and Structure of Refractory Multicomponent Alloys

I. S. Sipatov, S. A. Petrova, E. V. Ignatieva, S. A. Fedorov, V. A. Bykov, and A. A. Rempel p. 1972 abstract

Structural Phase State, Martensitic Transformations and Inelastic Properties of TiNi-based Alloy Fabricated by Electron Beam Wire-Feed Additive Manufacturing

K. V. Krukovskii, D. Yu. Zhapova, S. A. Martynov, Yu. P. Mironov, A. V. Kim, and A. A. Gusarenko p. 1980 abstract

NEW TECHNOLOGIES IN METALLURGICAL PROCESS

Evaluating Characteristics of Deformable Metal via Acoustic Method

S. A. Barannikova and P. V. Iskhakova p. 1987 abstract

Substructural State of the High-Entropy Alloy AlCoNiTiNb under Hydrogen Saturation and Heating

R. S. Laptev, Yu. A. Abzaev, S. A. Guda, A. A. Klopotov, M. Koptsev, A. V. Tereshchenko, I. A. Ushakov, M. Kruglyakov, P. Homidzoda, and A. M. Lider p. 1993 abstract

Strength Properties, Deformation and Fracture Behavior of Layered Metal-Intermetallic Composites Depending on the Layers Thickness and Friction Forces

Ya. D. Lipatnikova, Yu. V. Solov’eva, and G. A. Mun p. 1999 abstract

Construction and Technical Properties of Cements Based on Sulfoaluminoferrite Clinker with the Addition of Gypsum

Thet Naing Myint, Yu. R. Krivoborodov, Htet Paing Aung, and Aung Kyaw Nyein p. 2009 abstract

Modification of Silica-Based Sorbent for Chromatographic Processes Using Nepheline Concentrate

Y. O. Velyaev, D. V. Mayorov, K. A. Pimenov, and H. C. Silva p. 2015 abstract

Contents