Contents

Inorganic Materials: Applied Research

Vol. 13, No. 6, 2022

Metal Science. Metallurgy

Development of Thermal Rolling Regimes of Low-Alloy Arc Steel with Quasi-Homogeneous Ferrite-Bainitic Structure

O. V. Sych, S. V. Korotovskaya, E. I. Khlusova and N. S. Novoskoltsev p. 1459  abstract

Production of Single-Crystal Seeds [001] from Nickel–Tungsten Alloys by Directional Crystallization

V. N. Toloraya and G. A. Ostroukhova p. 1469  abstract

Heterogeneity of Structure and Mechanical Properties Studied in Thickness up to 100 mm of Low-Alloy Shipbuilding Steel Sheets with a Yield Strength Not Less Than 420 MPa

O. V. Sych, S. V. Korotovskaya, E. I. Khlusova, G. D. Motovilina and V. R. Nikitina p. 1477  abstract

Effect of Natural and Artificial Aging on Steel Mechanical Properties and Fracture Toughness

E. A. Yakovleva, A. V. Larionov, G. D. Motovilina and E. I. Khlusova p. 1490  abstract

Changes in the Structural and Textural States of VT41 Titanium Alloy Resulting from Hot Upsetting and Subsequent Annealing

P. N. Medvedev, S. A. Naprienko, O. S. Kashapov and E. V. Filonova p. 1499  abstract

Specific Features of Ruthenium Influence on Corrosion Characteristics of Different Titanium Alloys

A. S. Oryshchenko, V. P. Leonov, E. V. Chudakov and Yu. Yu. Malinkina p. 1506  abstract

High Strength Austenite Mn–Ni–Cu–V–C Dispersion Hardened Steel

M. V. Kostina, V. M. Blinov, G. Yu. Kalinin, O. V. Fomina and S. Yu. Mushnikova p. 1515  abstract

Study of the Mechanisms of Formation of a Recrystallization Nucleus in Austenitic Nitrogen-Containing Steel during HTMT

O. V. Fomina, A. A. Zisman and T. V. Vikhareva p. 1526  abstract

Choosing Accumulation and Preliminary Heat Treatment Modes for Making Forged Ingots of Medium-Carbon Medium-Alloy Steels

V. V. Tsukanov, D. L. Smirnova and S. V. Efimov p. 1534  abstract

X-ray and Neutron Diffraction Study of High-Strength Steel: Methodological Aspects

M. L. Fedoseev, S. N. Petrov, D. I. Nikolaev, A. I. Beskrovny and T. A. Lychagina p. 1546  abstract

Investigation of the Properties, Structure, and Quality of the Ti–4.25Al–2V Alloy Blanks Produced by Direct Laser Deposition

V. P. Leonov, N. F. Molchanova, A. A. Voropaev, S. A. Shalnova, E. V. Chudakov and M. V. Iksanov p. 1552  abstract

Functional Materials

Study of the Structure and Properties of Functional Coatings from Composite Powders of the Aluminum–Silicon Nitride System Additionally Reinforced with a Sialon Type Phase

T. I. Bobkova, A. I. Dmitryuk, E. A. Nezhensky and N. A. Lukyanova p. 1562  abstract

Coating of a Multicomponent System Al–Cr–Ni–Co–Fe on a Steel Substrate Obtained by Laser

D. A. Gerashchenkov and R. Yu. Bystrov p. 1569  abstract

Application of Cold Gas Dynamic Spraying as an Additive Technology for Producing Materials Based on Nickel Aluminide and Titanium Aluminide

D. A. Gerashchenkov p. 1575  abstract

Results of Studying the Profile of Single Tracks of Coatings Produced from Aluminum- and Nickel-Based Powders

A. S. Oryshchenko and D. A. Gerashchenkov p. 1582  abstract

Effect of Initial Powder Characteristics on Microrelief Features in the ZhS6K Grade Alloy after Selective Laser Fusion

A. N. Raevskikh, E. B. Chabina and E. V. Filonova p. 1592  abstract

On the Mechanism of Formation of Electrochromic WO3 Films on the Surface of Sn, Ti, ITO Electrodes in the Process of Cathodic Electrodeposition

Alexey V. Shchegolkov, M. S. Lipkin, Alexander V. Shchegolkov, E. V. Korbova, T. V. Lipkina and V. M. Lipkin p. 1605  abstract

Polymer Composite Materials

Properties of Fiberglass Based on Fire-Resistant Polyester Resins Produced in Russia, Brands Arkpol 40 M and Polymer 3088 TA

V. S. Tryasunov, E. L. Shultseva, A. M. Baganik and Yu. V. Polyakova p. 1615  abstract

Influence of Ion-Plasma Treatment of Reinforcing Fillers on the Complex of PCM Properties

E. D. Kolpachkov, P. A. Shchur, E. V. Kurshev, I. Yu. Chernyaeva and A. V. Shvedov p. 1622  abstract

Corrosion and Metal Protection

Development of Cathodic Corrosion Protection Systems for Nuclear Icebreakers and Arctic Offshore Structures

O. A. Stavitsky, G. I. Nikolaev, Yu. L. Kuzmin, I. V. Lishevich, A. V. Podshivalov and P. I. Malashev p. 1631  abstract

Research of Corrosion Cracking of D16T and Amg6 Aluminum Alloys Exposed to Microscopic Fungi

D. V. Belov, S. N. Belyaev, M. V. Maksimov and G. A. Gevorgyan p. 1640  abstract

Composition and Morphology of Hot-Salt Corrosion in Heat-Resistant Nickel Alloys

D. A. Movenko, A. B. Laptev and O. A. Zagorskykh p. 1652  abstract

Study of Hydrogenation and Corrosion of Steel Equipment and Pipelines at the Production Facilities of H2S-Containing Hydrocarbon Raw Materials

R. K. Vagapov p. 1658  abstract

Structural and Technological Strength and Performance of Materials

On the Fatigue Strength Calculation of Welded Shell Structures Made of High-Strength Steels under Low-Cycle Loading: Part 1. Estimation at the Initial Stage of Fatigue Failure

A. V. Ilyin, K. E. Sadkin and N. S. Zabavichev p. 1666  abstract

On the Fatigue Strength Calculation of Welded Shell Structures Made of High-Strength Steels under Low-Cycle Loading: Part 2. Development of the Calculation Procedure

A. V. Ilyin, K. E. Sadkin and N. S. Zabavichev p. 1683  abstract

Studying Changes of Limit Deformations and Mechanical Properties of Different Structure under Signal and Multiple Explosive Loading

O. V. Glibenko, T. V. Vikhareva and A. V. Ilyin p. 1703  abstract

High Temperature Low Cycle Fatigue of Co–Cr–Ni–W–Ta Heat Resistant Alloy Produced by Additive Technological Processes

P. V. Ryzhkov, D. I. Suhov, I. A. Hodinev and S. A. Monin p. 1719  abstract

Radiation Materials Science

Study of the Unirradiated Weld Metal of the VVER-440 Reactor Vessel after 45 Years of Operation

K. I. Medvedev, D. Yu. Erak, A. A. Chernobaeva, D. A. Zhurko, V. N. Kochkin, M. A. Skundin, S. A. Bubyakin, N. V. Pal and A. A. Reshetnikov p. 1727  abstract

A Study of Primary Damage Formation in Collision Cascades in Titanium

R. E. Voskoboinikov p. 1736  abstract

Study of Structural Phase Transformations in the Metal of Welded Joints of Reactor Plants for Nuclear Icebreakers

M. N. Timofeev, R. I. Samoylenko, S. N. Galyatkin, Yu. M. Markova, D. M. Anisimov, S. A. Korolev and S. V. Gurkin p. 1746  abstract

Testing, Diagnostics, and Quality Control of Materials

Digital Reference Images when Evaluating the Quality of Casting from Aluminum and Magnesium Alloys

E. I. Kosarina, A. V. Smirnov, P. V. Suvorov and A. A. Demidov p. 1754  abstract