Vol. 11, No. 6, 2020
Viability of Turbine Blade Material with a Long Service Life
p. 1267 abstract
The Study of the Heterogeneity of the Structure of a VT41 Titanium Alloy Billet after Thermomechanical Treatment
p. 1273 abstract
Effect of Aging Regimes on the Fracture Mechanism of Low-Alloy Steels with Different Structures
p. 1280 abstract
Research of the Quality of High-Strength Shipbuilding Steel with High Concentration of Calcium
p. 1286 abstract
Effect of Carbon Additives on the Mechanical Properties of a Titanium Near-α Alloy
p. 1291 abstract
Structure and Properties of High-Strength Low-Alloy Cold-Resistant Steel after Reheat and Direct Quenching with Tempering
p. 1299 abstract
The Influence of Heat Treatment on the Formation of the Structure and the Level of Mechanical Properties of High-Alloy Titanium Alloy
p. 1307 abstract
Structure and Properties of Nickel-Based Alloy EP718 in the Process of Manufacturing
p. 1317 abstract
Influence of Niobium Microalloying on the Kinetics of Static and Dynamic Recrystallization during Hot Rolling of Medium-Carbon High-Strength Steels
p. 1325 abstract
Interrelation between Performance Characteristics and Structure of the Heat-Affected Zones in Ferrite–Bainite Steels
p. 1333 abstract
Catalytically Active Powder Compositions for Hazardous Emission Reduction Systems
p. 1341 abstract
Features of the Formation of an Interface Zone Structure during Thermal Diffusion Metallization of Diamond by Transition Metals
p. 1348 abstract
Synthesis of Nanocomposite Coatings Based on Electrodeposited Amorphous Ni–P–W Layers
p. 1359 abstract
On the Antifouling Non-Biocide Coating with Low Surface Energy. Preliminary Results of Testing under Natural Conditions
p. 1364 abstract
Effect of Stoichiometric Composition on the Functional Characteristics of Thin-Film Surface Structures on Gyroscope Components
p. 1370 abstract
Wear Behavior of Metals in Dry Sliding against Molybdenum with Current Collection
p. 1378 abstract
Studying Changes in the Electrical Resistance of Elastomers Modified by Carbon Nanotubes during Their Compression, Stretching, and Torsion
p. 1383 abstract
Promising Hybrid Fabrics Based on Carbon and Aramid Fibers as a Reinforcing Filler for Polymer Composites
p. 1390 abstract
A Biomimicking Method for Fabrication of Polymer Nanocomposites and Study of Their Physicochemical Properties
p. 1397 abstract
On the Definition of Fire Safety Characteristics for Three-Layer Composite Polymers in Shipbuilding Structures
p. 1404 abstract
Electron-Beam Welding of Large Thickness Steels of Oil Producing Platform Components
p. 1410 abstract
Research of Weldability of Pseudo-β-Titanium Alloy VST 5553
p. 1417 abstract
Protection of Welded Joints from Oxidation at Welding of Titanium Alloys
p. 1423 abstract
Structure of Welded Joints of 15Kh2MFA Steel with Low Carbon Surfacing without Thermal Treatment
p. 1428 abstract
On Corrosion Properties of Ceramic Materials for Pump Friction Pairs in Lead–Bismuth Environment
p. 1434 abstract
Crack Resistance Evaluation for 38KhN3MFA-Sh Structural Steel According to Fracture Characteristics and Elastic Wave Velocities
p. 1439 abstract
Resistance of High-Strength Medium-Alloy Steel to Brittle Fracture and Its Connection to the Structural State Parameters
p. 1447 abstract
The Comparative Analysis and Verification of the Engineering Methods for Considering the Shallow Crack Effect for the Prediction of the Fracture Toughness of the Materials for Nuclear Reactor Pressure Vessels
p. 1462 abstract
Evolution of the Structural-Phase State of E110 Alloy Fuel Rod Claddings at High Temperatures and Stresses
p. 1481 abstract
Calculation of Temperature Conditions of a Plasma Sputtering Cell for Decontamination of Nuclear Power Plant Constructions
p. 1493 abstract
The Development of the Technology for Producing Vessel Structures of the Main Circulation Pump for a BREST Reactor
p. 1500 abstract
Methodical Approach to Studying Growth Kinetics for Short and Long Fatigue Cracks in Irradiated Reactor Materials: Part 1. Problem Definition. The Effect of Initial Notch Acuity on the Fatigue Crack Rate in Small-Sized Samples
p. 1504 abstract
Methodical Approach to Studying Growth Kinetics for Short and Long Fatigue Cracks in Irradiated Reactor Materials: Part 2. Construction of Fatigue Propagation Rate Diagram on the Basis of Test of Precracked Charpy Specimens
p. 1512 abstract