Vol. 10, No. 6, 2019

Inorganic Materials: Applied Research

Metal Sciences. Metallurgy

Scientific and Technological Bases for Developing Cold-Resistant Steel with a Guaranteed Yield Strength of 315–750 MPa for Arctic Conditions. Part 1: Alloying Principles and Requirements for Sheet Product Structure

O. V. Sych p. 1265 abstract

Scientific and Technological Bases for Developing Cold-Resistant Steel with a Guaranteed Yield Strength of 315–750 MPa for Arctic Conditions: Part 2. Manufacturing Technology, Structure, Properties, and Serviceability of Sheet Products

O. V. Sych p. 1282 abstract

Research of Recrystallization Processes in Low-Carbon Low-Alloy Steel in Modeling High-Temperature Rolling

S. V. Korotovskaya, O. V. Sych, E. I. Khlusova and E. A. Yashina p. 1301 abstract

The Effect of Microalloying on Mechanical Properties of Low-Carbon Chromium–Nickel–Molybdenum Steel

S. A. Golosienko, N. A. Minyakin, V. V. Ryabov, T. G. Semicheva and E. I. Khlusova p. 1309 abstract

Structure and Properties of the Intermetallic Alloy Based on Nickel Aluminide Microalloyed with Rare Earth Metals

O. A. Bazyleva, E.G. Arginbaeva, A. V. Shestakov and T. V. Fesenko p. 1314 abstract

Basic Physicochemical Concepts for Controlling the δ-Ferrite Content When Welding with Austenite-Ferrite Materials

A. A. Kazakov, O. V. Fomina, A. I. Zhitinev and P. V. Melnikov p. 1325 abstract

Modeling of Steel Hardening Process at Thermal and Mechanical Treatment

A. S. Oryshchenko, V. A. Malyshevsky and E. A. Shumilov p. 1333 abstract

Functional Materials

Synthesis and Electron Beam Facing of Titanium Monoboride–Titanium Matrix Composite Powders

G. A. Pribytkov, V. V. Korzhova, M. G. Krinitsyn and I. A. Firsina p. 1338 abstract

Correlation of the Diamond/Matrix Interphase Zone Structure with Tool Efficiency Obtained by Technology Combining Metallization of Diamonds with Matrix Sintering

P. P. Sharin, M. P. Akimova and V. I. Popov p. 1348 abstract

Experimental Production of Cu–Cr–N Composite Alloys and Thermodynamic Modeling of Their Phase Composition

S. Yu. Melchakov, L. E. Bodrova, E. Yu. Goyda, A. B. Shubin and P. A. Somov p. 1357 abstract

The Influence of Technological Parameters of Cold Gas Dynamic Spraying on Wear Resistance of Aluminum–Carbon Nanofibers Coatings

A. N. Skvortsova, O. V. Tolochko, T. I. Bobkova, E. A. Vasilyeva and M. V. Staritsyn p. 1365 abstract

Catalytically Active Coatings for Systems of Steam Conversion of Natural Gas: Synthesis and Catalytic Properties

M. L. Shishkova and I. V. Yakovleva p. 1372 abstract

Obtaining Functional Intermetallic Ni–Ti Coatings by Heterophase Transfer Combined with Laser Treatment

D. A. Geraschenkov, A. M. Makarov, E. Yu. Geraschenkova and A. F. Vasiliev p. 1378 abstract

Modern Approaches to the Development of Marine Antifouling Coatings

A. V. Anisimov, M. A. Mikhailova and E. A. Uvarova p. 1384 abstract

Strength Improvement of Metals Produced by Selective Laser Melting of Powders

B. K. Barakhtin, A. S. Zhukov, V. V. Bobyr, I. V. Shakirov and P. A. Kuznetsov p. 1390 abstract

Biotechnological Method of Obtaining Nanoparticles of Silver, Cadmium, and Zinc Sulfides. Physico-chemical Characteristics. Creation of Polymeric Nanocomposites

O. A. Zhuravliova, T. A. Voeikova, N. V. Bulushova, V. P. Veiko, T. T. Ismagulova, T. N. Lupanova, S. L. Lobastov, V. M. Retivov and V. G. Debabov p. 1394 abstract

Polymer Composite Materials

Epoxy Radiotechnical Hot Pressed Glass Fiber Plastics for Ship Aerial Fairings and Protection of Antennas in Radio Connection and Radio Location Systems

V. E. Bakhareva, I. V. Nikitina and A. A. Churikova p. 1401 abstract

Heat-Resistant Antifriction Carbon Plastics for Sliding Bearings of Pumps of Ship Power Stations, Thermal and Nuclear Power Plants

V. E. Bakhareva, V. S. Bogun, I. V. Lishevitch, I. V. Nikitina and A. S. Sargsyan p. 1412 abstract

On the Microstructure and Chemical Composition of the Polyimide Film Surface and Condensed Substances after Long-Term Exposure at the Mir Space Station

I. S. Deev and E. F. Nikishin p. 1421 abstract

Factors Influencing the Fire-Resistance of Epoxy Compositions Modified with Epoxy-Containing Phosphazenes

I. V. Terekhov, E. M. Chistyakov, S. N. Filatov, I. S. Deev, E. V. Kurshev and S. L. Lonskii p. 1429 abstract

Organoplastic for Composite Hull Constructions Exploited in Marine Environment

V. S. Tryasunov, M. S. Galaktionov, E. L. Shultceva and A. M. Baganik p. 1436 abstract

Main Directions for Research on the Development of Tribotechnical Composites Used in the Arctic Regions (Experience of North-Eastern Federal University in Yakutsk)

A. A. Okhlopkova, S. A. Sleptsova, P. G. Nikiforova, T. S. Struchkova, T. A. Okhlopkova and Z. S. Ivanova p. 1441 abstract

Welding and Allied Processes. Welding Consumables and Technologies

Mechanical Properties of the Welded Joints of the Pressed Aluminum–Magnesium 1565ch Alloy at Low and High Temperatures

S. A. Zykov, V. I. Pavlova and E. P. Osokin p. 1448 abstract

Managing Welded Joint Formation at Electron-Beam Welding of Aluminum Alloys of Increased Thicknesses

N. I. Sharonov and M. G. Sharapov p. 1456 abstract

Radiation Materials Science

Degradation of Fuel Cladding Materials Based on Zirconium after Operation in VVER-Type Reactors

A. S. Frolov, B. A. Gurovich, E. A. Kuleshova, D. A. Maltsev, D. V. Safonov, V. N. Kochkin, E. V. Alexeeva and N. V. Stepanov p. 1461 abstract

Zirconium Alloys with Low Melting Points

A. M. Savchenko, Y. V. Konovalov, A. V. Laushkin and G. V. Kulakov p. 1471 abstract

Structural and Technological Strength and Efficiency of Materials

The Basic Principles of Assessment of the Structural Integrity and Lifetime of the BN-Type Fast Neutron Reactor Components Considering Material Degradation

B. Z. Margolin, A. G. Gulenko, A. A. Buchatsky, A. A. Sorokin, O. Yu. Vilensky and B. A. Vasilev p. 1477 abstract

Quality Control of Steels for Large-Sized Welded Structures of the Arctic Shelf: Application of Russian and Foreign Requirements

V. Yu. Filin p. 1492 abstract

Simulation of Materials and Technological Processes

A Mathematical Model of Radiation-Induced Shape Change in Fuel Subassemblies of the BN-Type Reactor Core and Its Implementation in the ANSYS Software Package

A. V. Ryabtsov and O. Yu. Vilensky p. 1504 abstract

Testing, Diagnostics and Quality Control of Materials

X-ray Nondestructive Testing as an Essential Tool during Technology Design and Development of Modern Aircraft Materials

O. G. Ospennikova, E. I. Kosarina and O. A. Krupnina p. 1510 abstract

Contents