Contents

Inorganic Materials: Applied Research

Vol. 7, No. 6, 2016

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Inorganic Materials: Applied Research ISSN 2075-1133.

Metal Science. Metallurgy

Structure and Properties of Two-Layer Clad Steel Used in Arctic Vessel Hull Building

V. V. Sagaradze, N. V. Kataeva, S. Yu. Mushnikova, G. Yu. Kalinin, O. A. Kharkov, S. K. Kostin and O. N. Parmenova p. 815  abstract

Segregation of Alloying Elements in Directionally Solidified Re–Ru-Containing Ni-Based Superalloys

N. V. Petrushin, E. S. Elyutin, R. M. Nazarkin, S. I. Pakhomkin, V. G. Kolodochkina, T. V. Fesenko and E. S. Dzhioeva p. 824  abstract

Phase and Structural Transformations in Heat Resistant Intermetallide Nickel-Based Alloy

O. G. Ospennikova, N. V. Petrushin, I. A. Treninkov and O. B. Timofeeva p. 832  abstract

Functional and Polymer Composite Materials

The Structure and Composition of Samples Made of Carbon-Fiber-Reinforced Plastic KMU-4l Exposed for 12 Years on the Exterior Surface of the International Space Station: 1. Macrostructure and Surface Composition

I. S. Deev, E. F. Nikishin, E. V. Kurshev and S. L. Lonskii p. 840  abstract

The Structure and Composition of Samples Made of Carbon-Fiber-Reinforced Plastic KMU-4l Exposed for 12 Years on the Exterior Surface of the International Space Station: 2. Microstructure and Surface Composition

I. S. Deev, E. F. Nikishin, E. V. Kurshev and S. L. Lonskii p. 847  abstract

Creation of Composite Nanostructured Surface-Reinforced Powder Materials Based on Ti/WC and Ti/TiCN Used for Coatings with Enhanced Hardness

T. I. Bobkova, B. V. Farmakovskii and S. P. Bogdanov p. 855  abstract

Aluminum Matrix Functional Coatings with High Microhardness on the Basis of Al–Sn + Al2O3 Composite Powders Fabricated by Cold Gas Dynamic Spraying

A. S. Oryshchenko and D. A. Gerashchenkov p. 863  abstract

Long-Measuring Cast Microwires in Glass Insulation with a Strand from Intermetallic Compounds

I. V. Gorynin and B. V. Farmakovsky p. 868  abstract

Welding and Related Processes. Welding Materials and Technologies

Laser Welding of Cold-Resistant Steels Applied for Arctic Ship Structures

M. M. Pronin-Valsamaki, A. V. Baranov, V. V. Gezha and V. N. Startsev p. 871  abstract

Welding of High-Strength Titanium Alloys of Large Thicknesses for Use in Marine Environments

V. P. Leonov, V. I. Mikhailov, I. Yu. Sakharov and S. V. Kuznetsov p. 877  abstract

Phenomenological Model of Crystallization Center Nucleation in Metal Melt during Welding under the Influence of Ultrafine Refractory Components

G. N. Sokolov, V. I. Lysak, I. V. Zorin, A. A. Artemyev, Yu. N. Dubtsov, V. O. Kharlamov and A. A. Antonov p. 884  abstract

Corrosion and Protection of Metals

Corrosion Resistance Problems of Low-Magnetic Shipbuilding Steels

S. Yu. Mushnikova, G. Yu. Kalinin and A. A. Kharkov p. 892  abstract

Effect of Cathodic Polarization on Mechanical Characteristics of High-Strength Nitrogen-Containing Steel in Seawater

Yu. L. Kuzmin, V. O. Laschevskii and G. Yu. Kalinin p. 899  abstract

Examples of Corrosion Cracking in Cr18Ni10Ti Steel Caused by Residual Stresses at Bends and Pittings

B. K. Barakhtin and V. N. Malyshev p. 904  abstract

Structural–Technological Strenghts and Working Capacity of Materials

Studies on the Cyclic Crack Resistance of High-Strength Steels for Assessing the Service Life of Deep-Sea Equipment

K. E. Sadkin, A. V. Ilyin and A. A. Lavrentyev p. 909  abstract

Formulation of Criteria and Reasoning Procedure for the Safe Operation of Pipelines and FBR Housings under Conditions of Sodium Leakage via Through Crack and Its Combustion

R. M. Ramazanov, G. P. Karzov, B. Z. Margolin, V. A. Petrov and O. Yu. Vilensky p. 918  abstract

Initial Data and Criteria for the Reasoning Procedure for the Safe Operation of Pipelines and Housing of Equipment of FBR under Conditions of Sodium Leakage via Through Crack and Its Combustion

R. M. Ramazanov, G. P. Karzov, B. Z. Margolin, V. A. Petrov and O. Yu. Vilensky p. 930  abstract

Radiation Material Science

Assessment of the Crack Growth Rate in the Material of the VVER-1000 Reactor Internals under Irradiation Creep

B. Z. Margolin, A. A. Sorokin and A. A. Buchatsky p. 942  abstract