Contents
Inorganic Materials: Applied Research


Vol. 4, No. 6, 2013

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Inorganic Materials: Applied Research ISSN 2075-1133.


Physical Metallurgy, Metallurgy

Study of the Austenite Recrystallization in Steel 09KhN2MD Using the Stress
Relaxation Method under Hot Rolling Conditions

T. V. Soshina, A. A. Zisman, and E. I. Khlusova p. 487  abstract

Investigation of Transformations of Structure, Phase Composition, and Mechanical Properties
of 45Cr26Ni33Si2Nb2 Alloy during High-Temperature Test for Long-Term Strength
of Metal of a Centrifugal Casting Pipe

A. S. Oryshchenko, Yu. A. Utkin, S. N. Petrov, E. V. Nesterova,
and M. S. Mikhailov-Smol’nyakov
p. 494  abstract

Selection of Modes for Heat Treatment of the Alloy 21Cr43Ni2Mn2Si2Nb according
to High-Temperature X-ray Diffraction Methods

M. L. Fedoseev, A. V. Ptashnik, S. N. Petrov, B. K. Barakhtin, and Yu. A. Utkin p. 502  abstract


Functional Materials

Antifriction Carbon Plastics in the Machinery Construction

V. E. Bakhareva, G. I. Nikolaev, and A. S. Oryshchenko p. 508  abstract

Investigation of the Mechanism of Ultrahigh-Speed Universal Disintegrator–Activator Treatment
for Production of Soft Magnetic Powder Materials Based on an Amorphous Tape
of Alloy of the Fe–Cu–Nb–Si–B System

E. Yu. Gerashchenkova, E. A. Samodelkin, P. A. Kuznetsov,
M. S. Pervukhina, and N. V. Yakovleva
p. 518  abstract


Welding Materials and Technologies

Hydroxide Compounds in Coatings of Welding Electrodes

Yu. D. Brusnitsin, I. V. Gorynin, V. A. Malyshevskii, V. T. Kalinnikov,
A. I. Nikolaev, Yu. V. Avvakumov, and A. N. Bykov
p. 527  abstract


Corrosion and Protection of Metals

Increase in Corrosion Resistance of Titanium Alloy in Concentrated Aqueous Solutions
of Chlorides at High Temperatures

V. F. Scherbinin, V. P. Leonov, and Yu. Yu. Malinkina p. 537  abstract


Structural and Operational Strength and Efficiency of Materials

Determination of the Structural and Operational Stress Concentrations
in Welded Joints to Assess the Fatigue Strength of Hull Structures

A. V. Il’in and K. E. Sadkin p. 542  abstract

Development of Techniques for Determination of the Critical Crack-Tip-Opening Angle
as a Characteristic of the Extended Ductile Failure of Pipeline Metal

A. V. Il’in, O. P. Vinogradov, and M. A. Gusev p.554  abstract

Effect of Long-Term Operational Aging on the Mechanical Properties and Microstructure
of Austenitic 18Cr-9Ni Steel and the Weld Metal

I. P. Kursevich, B. Z. Margolin, O. Yu. Prokoshev, V. I. Smirnov,
V. A. Fedorova, E. V. Nesterova
, and S. N. Petrov p. 562  abstract


Radiation Materials Science

Principles of Alloying a Novel Radiation-Resistant Austenitic Steel for the VVER-1200
Reactor Internals Guaranteeing Their Safe Operation for at Least 60 Years

I. P. Kursevich, G. P. Karzov, B. Z. Margolin, A. A. Sorokin, and I. V. Teplukhina p.575  abstract


Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.