Contents

Inorganic Materials: Applied Research

Vol. 16, No. 5, 2025

PHYSICOCHEMICAL PRINCIPLES OF CREATING MATERIALS AND TECHNOLOGIES

The Use of Various Materials in the Introduction of Hydrogen Isotopes into Organic Compounds without Solvents

V. P. Shevchenko, I. Yu. Nagaev, and N. F. Myasoedov p. 1233  abstract

Prediction of ABX Compounds (X = As, Sn, Sb, Pb, or Bi) with the MgAgAs Structure Type and Their Crystal Lattice Parameters

N. N. Kiseleva, V. A. Dudarev, A. V. Stolyarenko, O. V. Senko, A. A. Dokukin, and Yu. O. Kuznetsova p. 1248  abstract

Multilayer Coatings Based on van der Waals MoS2/WS2/WSe2 Heterostructures with Improved Antifriction Properties

S. N. Grigoriev, D. V. Fominski, V. N. Nevolin, M. A. Volosova, and V. Yu. Fominski p. 1255  abstract

MATERIALS FOR AVIATION AND SPACE TECHNOLOGY

Centrifugal Casting of Aluminum Alloys as a Method for Obtaining Semi-Finished Products with an Increased Set of Properties for Space Technology Products

P. Yu. Predko, D. I. Maiorov, N. D. Shanin, A. A. Alpatov, and S. G. Bochvar p. 1263  abstract

High-Temperature Molding, Structure, and Phase Composition of Composites Based on TiB/TiAl(Nb, Mo)B

P. M. Bazhin, M. S. Antipov, A. P. Chizhikov, A. S. Konstantinov, A. D. Bazhina, and P. A. Stolin p. 1272  abstract

ELECTRONIC MATERIALS

Mechanical and Thermoelectric Properties of Solid Solutions of Bismuth and Antimony Chalcogenides Depending on the Purity of Initial Materials

L. D. Ivanova, I. Yu. Nikhezina, A. G. Malchev, D. S. Nikulin, and M. G. Lavrentev p. 1281  abstract

The Effect of Gas Phase Composition on the Growth of Silicon Nanocrystal Nanowires in the Si–H–Cl System

V. A. Nebolsin, V. V. Korneeva, and V. V. Maltsev p. 1293  abstract

Using Injection-Thermal Treatment to Reduce Defectiveness of Dielectric Films of MIS Structures

D. V. Andreev, S. A. Kornev, G. G. Bondarenko, and V. V. Andreev p. 1301  abstract

Thermoelectric Micromodules for Small Heat Flows

D. S. Nikulin, L. D. Ivanova, I. Yu. Nikhezina, and A. G. Malchev p. 1306  abstract

Temperature Dependencies of Thermal Properties of Dielectric Polymer Composite Materials Based on Hexagonal Boron Nitride and Phenol-Formaldehyde Resin

E. A. Danilov, N. S. Romanov, E. M. Gurova, and V. M. Samoilov p. 1313  abstract

MATERIALS FOR ENERGY AND RADIATION-RESISTANT MATERIALS

Structure and Mechanical Properties of Electrolytic Chromium Coatings Deposited on the Inner Surface of Fuel Cladding Made of EP823-Sh Steel

G. N. Elmanov, R. Sh. Isaev, P. S. Dzhumaev, A. D. Yakovleva, B. A. Loginov, and I. A. Naumenko p. 1324  abstract

The Thermal Expansion of Lanthanum Zirconate Ceramics

V. R. Khrustov, A. S. Kaygorodov, and S. V. Zayats p. 1333  abstract

Features of Structural Changes in the Amorphous Alloy Al85Ni5Fe7La3 under Xenon Ion Irradiation

N. D. Bakhteeva, A. N. Nechaev, V. K. Semina, O. V. Rybalchenko, E. V. Todorova, N. N. Presnyakova, T. R. Chueva, P. P. Umnov, and N. V. Gamurar p. 1338  abstract

MATERIALS FOR HUMAN LIFE SUPPORT AND ENVIRONMENTAL PROTECTION

The Comparative Characteristics of Bioactivity of Materials Based on a Mixture of Calcium Phosphates and Polysaccharides

A. A. Tsyganova and O. A. Golovanova p. 1348  abstract

Polymer Composite Material Based on Carboxylate Butadiene–Nitrile Copolymer for the Manufacture of Environmentally Friendly Dipped Products

K. E. Dmitriev, I. S. Korotneva, and A. O. Shamina p. 1356  abstract

MATERIALS FOR HUMAN LIFE SUPPORT AND ENVIRONMENTAL PROTECTION

Analyzing Parameters in Deformation Models of Hyperelastic Biotissues

S. A. Muslov, A. I. Lotkov, and A. N. Nikishenko p. 1364  abstract

The Influence of Organic and Inorganic Plasticizing Agents on the Properties of Alumina Supports and CoMo/Al2O3 Hydrotreating Catalysts of Diesel Fractions. Part 1. Alumina Supports

P. P. Mukhacheva, Yu. V. Vatutina, K. A. Nadeina, I. G. Danilova, P. P. Dik, V. P. Pakharukova, E. Yu. Gerasimov, I. P. Prosvirin, O. V. Klimov, and A. S. Noskov p. 1371  abstract

Investigation of the Effect of Pulsed Helium Ion and Helium Plasma Flows on the Structure and Mechanical Properties of Surface Layers of Ti–Nb–Mo–Zr–Al Alloys

K. V. Sergienko, M. A. Sevostyanov, A. S. Demin, E. V. Morozov, N. A. Epifanov, S. V. Konushkin, M. A. Kaplan, Ya. A. Morozova, and A. G. Kolmakov p. 1379  abstract

Loading and Releasing of Rhodamine B from a Composite Material Based on Nanofiber Polylactic Acid and Calcium Carbonate Microparticles Doped with Magnetite Nanoparticles

N. V. Koronevskiy, E. S. Prikhozhdenko, O. A. Inozemtseva, B. V. Sergeeva, I. S. Velikanov, and S. A. Sergeev p. 1386  abstract

Effect of Carbonization Temperature on the Physicochemical and Sorption Properties of Coals from Plant Biomass for Removing Dyes from Solutions

A. H. K. Kadum, D. A. Badin, S. O. Rybakova, I. V. Burakova, A. E. Burakov, T. P. Dyachkova, and A. G. Tkachev p. 1394  abstract

MATERIALS FOR HUMAN LIFE SUPPORT AND ENVIRONMENTAL PROTECTION

Composite Porous Materials Made of Polyvinylpyrrolidone and Sodium Alginate and Double (Manganese and Strontium)-Substituted Tricalcium Phosphate for Medicine

I. V. Fadeeva, A. B. Mikhailova, G. A. Davidova, L. I. Akhmetov, O. S. Antonova, K. K. Churakova, and I. I. Selezneva p. 1404  abstract

GENERAL PURPOSE MATERIALS

The Influence of Complex Modification on the Structure of Complex-Alloy Hypereutectic Silumin

I. A. Petrov, A. P. Ryakhovskii, P. Yu. Predko, D. I. Maiorov, and R. S. Fedortsov p. 1410  abstract

The Effect of Magnesium on Specific Heat Capacity and on Changes in Thermodynamic Functions of the Model Aluminum Alloy AlBe1

M. Z. Kurbonova, I. N. Ganiev, and I. A. Emomov p. 1420  abstract

The Influence of Tantalum on the Structure and Properties of AISI 316L Stainless Steel

A. M. Romanova and A. I. Gorunov p. 1428  abstract

An Investigation of the Properties of Nanocomposites Based on a Mixture of High and Low Pressure Polyethylene with Nickel-Containing Nanofillers

G. G. Mamedova, N. I. Kurbanova, T. M. Gulieva, and E. G. Iskenderova p. 1436  abstract

Development and Research of Cermets Based on the NiAl–Al2O3 System Modified with MgAl2O4 Nanoparticles and Y2O3 Microparticles

L. E. Agureev, S. V. Savushkina, A. A. Ashmarin, E. A. Danilina, A. V. Ivanov, S. D. Ivanova, and S. A. Garibashvili p. 1441  abstract

Features of Isothermal Crystallization of Composites Based on High-Density Polyethylene and Fibrous Basalt

N. T. Kakhramanov, O. M. Guliyeva, A. A. Hasanova, and S. S. Aliyeva p. 1456  abstract

Structural, Magnetic and Electrical Characteristics of La–Sr Manganites Depending on Electronic Configuration of Manganese Substituents and Oxygen Concentration

V. K. Karpasyuk, A. G. Badelin, D. I. Merkulov, and S. Kh. Estemirova p. 1461  abstract

Martensitic Transformations and Inelastic Properties of TiNi Alloy Undergoing abc Pressing at 300°C

A. A. Gusarenko, A. I. Lotkov, V. N. Grishkov, D. Yu. Zhapova, and D. I. Bobrov p. 1468  abstract

NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS

A Comparative Analysis of the Mechanical Properties and Microstructure of Three-Component Epoxy Polymers and Fiberglass Composites Obtained by Thermal and Microwave Heat Treatment

E. V. Matveev, V. V. Berestov, A. I. Gaidar, and A. A. Veveris p. 1477  abstract

Hydrothermal Synthesis, Optical and Photocatalytic Properties of Yttrium-Doped Titanium Dioxide Nanoparticles

I. V. Egelskii, M. A. Pugachevskii, V. V. Rodionov, A. V. Syuy, and A. V. Grigorieva p. 1487  abstract

The Effect of DC Discharge on the Properties and Surface Structure of Polyphenylene Oxide Films

M. S. Piskarev, A. V. Zinoviev, A. B. Gilman, E. A. Skryleva, B. R. Senatulin, A. K. Gatin, D. A. Syrtsova, A. Yu. Alentiev, and A. A. Kuznetsov p. 1495  abstract

Synthesis of a Composite Material in Combustion Mode from a Mixture of Ti + 2B and Composite Ni–Al Particles with Different Ratios of Components

M. A. Ponomarev, V. E. Loryan, and N. A. Kochetov p. 1505  abstract

Carbon Fiber from Isotropic Petroleum Pitch Doped with Carbon Nanotubes

K. O. Gryaznov, V. Z. Mordkovich, D. D. Prikhodko, N. I. Batova, E. B. Mitberg, O. N. Abramov, D. V. Zhigalov, P. A. Storozhenko, and N. Yu. Beilina p. 1516  abstract

Preparation of Europium and Gadolinium Hafnates with Pyrochlore Structure Using Microwave Radiation

N. V. Grechishnikov, A. A. Ilyicheva, L. I. Podzorova, and E. E. Nikishina p. 1524  abstract

Study of Samples of Aluminum Reinforced with Hollow Copper Spheres Obtained by Casting

V. A. Gulevsky, V. I. Antipov, A. G. Kolmakov, S. N. Tsurikhin, N. Yu. Miroshkin, V. V. Gulevsky, Yu. E. Mukhina, E. E. Baranov, and M. A. Kaplan p. 1529  abstract

Analysis of Microstructure and Hardness of Weld Spots during Laser-Acoustic Heating of Stainless Steel

I. V. Shvarts, Ya. V. Krylov, S. A. Nikiforov, A. I. Gorunov, and A. Kh. Gilmutdinov p. 1534  abstract

Deposition of Silicon-Carbon Coatings by Electron Beam Evaporation of Silicon Carbide in an Oxygen-Containing Medium

V. A. Burdovitsin, A. A. Andronov, L. J. Ngon A Kiki, and F. A. Sukhovolsky p. 1541  abstract

Granule Size as a Function of the Apparent Viscosity of a Suspension During Spraying (Agglomeration) in a Drying and Granulating Unit

O. M. Khapkov, V. S. Shtatnova, D. I. Volkov, and A. A. Fadeev p. 1546  abstract

Corrosion-Electrochemical Behavior of the TsAMSv4-1-2.5 Zinc Alloy Doped with Sodium in a NaCl Electrolyte Environment

I. N. Ganiev, L. Z. Alieva, A. E. Berdiev, and S. J. Alikhonova p. 1553  abstract

Friction Treatment of a Plasma Layered Ni + WC–12 wt % Co + Ni + WC–12 wt % Co + Ni Coating on a Cylindrical Titanium Substrate

V. I. Kalita, D. I. Komlev, A. A. Radyuk, and A. B. Mikhailova p. 1560  abstract

Effects of Xerogel Synthesis on Physical and Chemical Properties of Nanopowder and Ceramic Materials in the CeO2–Dy2O3 System

M. V. Kalinina, T. V. Khamova, N. V. Farafonov, N. R. Loktyushkin, S. V. Myakin, and I. Yu. Kruchinina p. 1569  abstract

Nitridation of the Zr–V Metal Pair and Evaluation of the Thermo-EMF of a Synthesized Ceramic Sample

I. A. Kovalev, G. P. Kochanov, A. N. Rogova, A. A. Ashmarin, A. A. Zerkov, A. S. Chernyavsky, and K. A. Solntsev p. 1577  abstract

The Dependence of Strength Characteristics of Synthetic Fibers on the Composition of Plasma-Forming Gas and Treatment Time When Exposed to a Low-Pressure Discharge

I. Sh. Abdullin, I. K. Nekrasov, and F. R. Sagitova p. 1587  abstract

The Regularities of the Synthesis of Zinc Oxide Nanoparticles in an Aqueous Medium by Laser Ablation

I. N. Lapin, E. A. Gavrilenko, V. A. Svetlichnyi, and A. I. Mamaev p. 1594  abstract