Contents

Inorganic Materials: Applied Research

Vol. 15, No. 5, 2024

PHYSICAL AND CHEMICAL FOUNDATIONS OF CREATING MATERIALS AND TECHNOLOGIES

Artificial Intelligence in Materials Science and Modern Concrete Technologies: Analysis of Possibilities and Prospects

V. A. Poluektova, and M. A. Poluektov p. 1187  abstract

Spherical Submicron Powders with a Nanopolycrystalline Superstructure—a Promising Raw Material for Obtaining Fine-Grained High-Density Ceramics

L. V. Vinogradov, V. I. Antipov, A. G. Kolmakov, Y. E. Mukhina, and E. E. Baranov p. 1199  abstract

Comparative Studies of Nanoparticles Formed by Pulsed Laser Ablation of WSe2 in Water and Alcohol

V. N. Nevolin, D. V. Fominski, A. A. Solovyov, D. E. Lesnykh, R. I. Romanov, and V. Yu. Fominski p. 1206  abstract

MATERIALS FOR AVIATION AND SPACE TECHNIQUES

High-Temperature Gas and Salt Corrosion of Nickel Alloy

V. Z. Poilov, P. V. Skovorodnikov, D. V. Saulin, A. L. Kazantsev, and A. I. Puzanov p. 1214  abstract

ELECTRONIC MATERIALS

The Effect of the Structure of Co–Ni–Fe Films Obtained by Electrochemical Deposition on Their Magnetic Properties

R. D. Tikhonov, A. A. Cheremisinov, and M. R. Tikhonov p. 1222  abstract

Nanostructured Titanium Dioxide Modification Using the Hydrothermal Method to Enhance the Electrical Parameters of Betavoltaic Cells

A. V. Bratsuk, D. S. Kiselev, S. Yu. Kovtun, D. A. Zaytsev, E. N. Fedorov, A. A. Igonina, D. M. Vardanyan, and A. A. Urusov p. 1230  abstract

Solid Solutions Based on Bismuth Telluride Doped with Graphene

L. D. Ivanova, Yu. V. Granatkina, I. Yu. Nikhezina, A. G. Malchev, D. S. Nikulin, M. Y. Shtern, and A. R. Erofeeva p. 1240  abstract

A Study of the Space Charge-Limited Injection Currents in TiO2-Based Thin-Film Metal-Dielectric Structures

D. K. Nikiforov, V. V. Andreev, and G. G. Bondarenko p. 1249  abstract

MATERIALS FOR POWER INDUSTRY AND RADIATION RESISTANT MATERIALS

Chemical Stability of Fine-Grained Ceramics Based on Nd0.33Zr2(PO4)3 Phosphate with Kosnarite Structure at Elevated Temperatures

L. S. Alekseeva, A. V. Nokhrin, A. I. Orlova, M. S. Boldin, A. V. Voronin, A. A. Murashov, and V. N. Chuvil’deev p. 1256  abstract

Effect of Pulsed Helium Ion and Helium Plasma Flows on Austenitic Chromium–Manganese Steel Preirradiated with Deuterium

A. S. Demin p. 1265  abstract

MATERIALS FOR HUMAN LIFE SUPPORT AND ENVIRONMENTAL PROTECTION

Ceramic Materials Based on a Complex Oxide Solid Solution of a Tetragonal Form of Zirconia: Application in Prosthetic Dentistry

L. I. Podzorova, A. A. Il’icheva, N. A. Mikhayilina, O. I. Pen’kova, O. S. Antonova, I. Yu. Lebedenko, and D. A. Shumskaya p. 1274  abstract

Eudialyte of the Kola Peninsula Is a Promising Source for Obtaining Composite Zr–Ti–SiO2 Sorbents of Nonferrous Metals and Radionuclides

D. V. Mayorov p. 1280  abstract

Structure and Properties of the SiO2–Cr2O3 Coatings Obtained by Pulsed Magnetron Sputtering onto a ZrO2 Ceramic Substrate

R. S. Nebogatikov, and S. Ya. Pichidze p. 1289  abstract

Evaluation of the Biological Effect of Medical Devices: General Requirements for Biological Safety (Analytical Review)

V. I. Sevastianov, N. V. Perova, E. V. Arzumanyants, N. M. Perova, N. V. Kaminskaya, and I. A. Dovzhik p. 1300  abstract

Brushite Boron Cement with Antibacterial Properties

I. V. Fadeeva, Shachnoza Fuzailova, I. V. Dudenkov, P. V. Slukin, N. A. Andreeva, A. V. Knot’ko, and D. V. Deyneko p. 1311  abstract

Synthesis and Copolymerization of Benzamide Methacrylate with Styrene

K. G. Guliyev, V. E. Vakhabova, and D. R. Nurullayeva p. 1317  abstract

The Structure and Mechanical Properties of Ti–(36–40)Zr–9Ta (at %) Alloys for Medical Purposes

M. A. Volchikhina, S. V. Konushkin, S. A. Mikhlik, K. V. Sergienko, M. A. Kaplan, A. D. Gorbenko, T. M. Sevostyanova, A. G. Kolmakov, and M. A. Sevostyanov p. 1321  abstract

Optimization of the Mineralization Process of Polycaprolactone Fibers with Vaterite Microparticles

N. V. Koronevskiy, O. A. Inozemtseva, B. V. Sergeeva, M. A. Popova, A. A. Andreev, and S. A. Sergeev p. 1329  abstract

GENERAL PURPOSE MATERIALS

Structure and Strength of Porous Materials Based on Titanium Carbide Powers of Different Dispersion

V. S. Shustov, V. A. Zelensky, A. B. Ankudinov, A. S. Ustyukhin, M. A. Kaplan, and A. A. Ashmarin p. 1336  abstract

The Influence of Aluminosilicate Cenospheres on the Structure and Properties of Elastomeric Composite Materials Based on Ethylene–Propylene–Diene Elastomers

K. V. Sukhareva, I. A. Mikhailov, N. O. Belyaeva, A. D. Buluchevskaya, M. E. Mikhailova, T. I. Chalykh, L. R. Lyusova, and A. A. Popov p. 1342  abstract

Nickel-Containing Nanocomposites Based on Isotactic Polypropylene and High-Pressure Polyethylene

N. I. Kurbanova, S. K. Ragimova, and T. M. Guliyeva p. 1350  abstract

Conglomeration of Elemental Powders of High-Entropy 30Fe–30Cr–20Ni–10Mo–10W Alloy for Additive Manufacturing

A. Yu. Ivannikov, A. B. Ankudinov, A. B. Mikhailova, B. A. Rumyantsev, A. V. Mikhailova, and V. A. Zelensky p. 1355  abstract

Diaphragm and Membrane for Alkaline Water Electrolysis with Zirconium Hydroxide Hydrogel as Hydrophilic Filler

V. N. Kuleshov, S. V. Kurochkin, N. V. Kuleshov, A. A. Gavrilyuk, M. A. Klimova, and O. Yu. Grigorieva p. 1360  abstract

Effect of Fe3O4 Iron Oxide Nanoparticles on the Structure and Thermal Properties of High-Density Polyethylene-Based Nanocomposites

M. N. Bayramov, A. A. Nabiev, N. Sh. Aliyev, and M. A. Nuriev p. 1367  abstract

Effect of Strontium on the Oxidation Kinetics of Aluminum Conductor Alloy AlTi0.1 in the Solid State

I. N. Ganiev, F. Sh. Zokirov, R. J. Faizulloev, and M. M. Mahmadizoda p. 1374  abstract

New Epoxy-Imide Resin

E. T. Aslanova, S. Y. Heydarova, E. G. Iskenderova, and B. A. Mamedov p. 1383  abstract

Influence of Service Life on Physical and Mechanical Characteristics of Polyethylene Pipes

O. Yu. Elagina, A. V. Buryakin, and N. S. Poches p. 1388  abstract

Promising Nonwoven Materials Based on Heat-Resistant Fibers for Thermal Protection

I. D. Kraev, S. E. Istyagin, N. M. Sklyarevskya, E. G. Surnin, S. B. Bibikov, and M. A. Sevostianov p. 1394  abstract

Hybridization of Carbon Fiber Using Ultra-High-Molecular-Weight Polyethylene Fibers: How It Affects Density, Bending, and Impact Strength

V. I. Mamonov, E. N. Beletsky, and G. S. Sprygin p. 1402  abstract

NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS

Influence of Modification with Iodine and Thermal Posttreatment on the Structure and Electrical Conductivity of Graphene Oxide

N. A. Chapaksov, T. P. Dyachkova, N. R. Memetov, A. E. Memetova, R. A. Stolyarov, V. S. Yagubov, and Yu. A. Khan p. 1414  abstract

NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS

A Study of the Structure and Properties of a Ti–Al–Mg/Ti-Based Metal–Intermetallic Material Produced by Self-Propagating High-Temperature Synthesis Combined with Pressing

P. A. Lazarev, A. E. Sytschev, Yu. V. Bogatov, and O. D. Boyarchenko p. 1421  abstract

NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS

Thermal Conductivity of YAG:Nd + Mo Ceramic Composites Obtained by Spark Plasma Sintering

L. S. Alekseeva, A. V. Nokhrin, A. I. Orlova, M. S. Boldin, E. A. Lantcev, A. A. Murashov, V. N. Chuvil’deev, N. Yu. Tabachkova, N. V. Sakharov, and A. A. Moskvichev p. 1429  abstract

Synthesis of (Ti, Cr)xCy Carbides in VT6 Alloy by Direct Laser Deposition

A. I. Gorunov p. 1437  abstract

NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS

Phase Composition and Morphology of a CuSn10Pb10 Bronze Surface after Electric Spark Machining Using Analogous Anodes

N. A. Pankin, S. A. Velichko, V. P. Mishkin, and S. V. Ilyin p. 1444  abstract

NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS

The Influence of TiC and TiB2 Reinforcement on the Properties and Structure of Aluminum Alloy AMg2

Yu. V. Sherina, A. R. Luts, and A. D. Kachura p. 1449  abstract

Dependence of Density, Hardness, Strength, and Dimensions of WC–15 Co Hard Alloy Samples on the Plasticizer Content in Workpieces Obtained Using a Plastic Mold Made by 3D Printing

M. I. Dvornik, E. A. Mikhailenko, A. A. Burkov, and D. A. Kolzun p. 1457  abstract

Plasma Chemical Modification of Glass Silica Based on Waste from the Enrichment of Ferruginous Quartzite KMA

V. S. Bessmertny, N. M. Zdorenko, M. A. Bondarenko, A. V. Cherkasov, A. V. Makarov, and N. M. Burlakov p. 1466  abstract

Formation of Hydrophobic Coatings on the Surface of Track-Etched Membranes Using Magnetron Sputtering of Polymers in Vacuum

L. I. Kravets, V. A. Altynov, R. V. Gainutdinov, A. B. Gilman, V. Satulu, B. Mitu, and G. Dinescu p. 1473  abstract

The Influence of Additive Migration on the Surface Properties of Polypropylene-Based Films during Modification in Low-Temperature Corona Discharge Plasma

A. M. Lyakhovich, E. M. Galikhanov, O. A. Bikeev, and V. L. Vorobyev p. 1483  abstract

Synthesis of Complex Oxide Ceramics in a Fast Electron Beam

S. A. Ghyngazov, I. P. Vasil’ev, and V. A. Boltueva p. 1490  abstract

Synthesis of Carbon Nanotubes Using Microwave Radiation to Modify Elastomer with Improved Electrical and Thermal Conductivity

A. V. Shchegolkov, A. V. Shchegolkov, M. A. Chumak, A. V. Nashchekin, and K. V. Likhachev p. 1499  abstract

The Effect of Plastic Deformation Technology on Mechanical Properties of Polytetrafluoroethylene-Based Composites

P. N. Petrova, and M. A. Markova p. 1508  abstract

The Effect of Cathodic Chrome Embedding in a Zinc Coating on Protection Properties

I. S. Pankratov, and N. D. Solovyova p. 1516  abstract

Structure and Microhardness of Steel R6M5 Coating after Spraying and Subsequent Friction Treatment

V. I. Kalita, D. I. Komlev, A. A. Radiuk, and A. B. Mihailova p. 1522  abstract

Experimental Verification of the Mechanism of Formation of Condensed Products from a Powder Mixture of Ti–B–TiH2 in the Course of Self-Propagating High-Temperature Synthesis

A. G. Tarasov, A. V. Linde, V. T. Telepa, and I. A. Studenikin p. 1531  abstract

Highly Porous Ceramic Materials Based on Coarse-Dispersed αAl2O3

R. D. Kapustin, V. I. Uvarov, A. O. Kirillov, A. S. Fedotov, D. Yu. Grachev, and M. V. Tsodikov p. 1537  abstract

NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS

Electric Pulse Treatment of Cured Thermosetting Synthetic Resins

O. Yu. Erenkov, S. P. Isaev, and D. O. Yavorskiy p. 1544  abstract

METHODS OF STUDY OF PROPERTIES OF MATERIALS

Methods for Studying the Electrical Characteristics of the Epitaxial Layers of n/p-InxGa1 – xAs Solid Solutions for Large-Area Device Structures

N. D. Platonov, A. A. Lebedev, V. L. Matukhin, A. A. Smirnov, and A. F. Ivanov p. 1549  abstract

Experimental Assessment of the Adequacy of Numerical Modeling of the Interlayer Crack Resistance of a Laminate Glass-Epoxy Composite under Combined Loading Mode I/II

P. G. Babaevskiy, N. V. Salienko, and A. A. Shatalin p. 1558  abstract