Vol. 13, No. 5, 2022

Inorganic Materials: Applied Research

Physicochemical Fundamentals of Creating Materials and Technologies

High-Temperature Corrosion-Resistant Ceramic Composite Materials Based on (Si–B–C–N) System Compounds (Review)

T. N. Smetyukhova, A. A. Barmin, L. E. Agureev, R. I. Rudshtein, I. N. Laptev, A. V. Ivanov and B. S. Ivanov p. 1125 abstract

Thixotropic Polymer Cement Concrete: Modeling, Research, Application

V. A. Poluektova and N. A. Shapovalov p. 1136 abstract

Physics, Chemistry, and Mechanics of Formation of Bioactive Surfaces on Implants. Review

V. I. Kalita, D. I. Komlev and A. A. Radiuk p. 1145 abstract

Elastomer Materials for Application in Equipment of Subsea Production Systems

M. V. Korobchuk p. 1161 abstract

Chemical Properties and Electronic Structure of Molybdenum Oxysulfide Films for Advanced Photoelectrocatalysts for Hydrogen Production

V. N. Nevolin, R. I. Romanov, D. V. Fominski, O. V. Rubinkovskaya and V. Yu. Fominski p. 1173 abstract

Materials of Aircraft and Aerospace Engineering

Crystallization Conditions for Ingots of High-Strength Aluminum Alloys with an Increased Content of Zirconium

S. G. Bochvar, N. D. Shanin, V. I. Tararyshkin and P. Yu. Predko p. 1182 abstract

Permanent Joint Stability of Heat-Resistant Deformable Nickel and Cast Intermetallic Alloys Obtained under Superplasticity Conditions (Part II)

O. A. Bazyleva, V. A. Valitov, E. G. Arginbaeva, N. S. Dmitriev, A. N. Raevskikh and E. V. Galieva p. 1191 abstract

Structure and Properties of Industrial Semifinished Products from a Weldable Corrosion-Resistant Aluminum Alloy of the Al–Mg–Si–Cu System

K. V. Antipov, I. Benarieb, Y. S. Oglodkova and A. S. Rudchenko p. 1200 abstract

Materials of Electronic Engineering

New Method for Obtaining ZnSb and Zn₄Sb₃

L. D. Ivanova, Yu. V. Granatkina, I. Yu. Nikhezina, A. G. Malchev, M. I. Zaldastanishvili, S. P. Krivoruchko, V. V. Novinkov and E. R. Shchedrov p. 1209 abstract

Materials for Quantum Electronics and Photonics

Study of the Electrochemical and Electrical Properties of Zn(II) Pyrazolone-Based Azomethine Complexes and Their Temperature Dependences

A. S. Tyutyunik, V. S. Gurchenko and A. S. Mazinov p. 1216 abstract

Materials for Energetics and Radiation-Hardened Materials

Temperature Dependences of Elastic Young’s Modulus and Internal Friction of 12% Chromium Ferritic-Martensitic Steels EK-181 and EP-823 with Different Heat Treatment Modes

K. A. Moroz, V. M. Chernov, M. V. Leontieva-Smirnova and E. M. Mozhanov p. 1223 abstract

Radiation Changes in the Nanostructure of Graphite-Like Boron Nitride and Monitoring of the Temperature of In-Channel Reactor Irradiation

E. I. Isaev, V. A. Stepanov and V. M. Chernov p. 1229 abstract

Features of Niobium Damage by Pulsed Laser Radiation in Comparison with Beam-Plasma Impact

V. N. Pimenov, I. V. Borovitskaya, A. S. Demin, N. A. Epifanov, E. E. Kazilin, S. V. Latyshev, S. A. Maslyaev, E. V. Morozov, I. P. Sasinovskaya, G. G. Bondarenko and A. I. Gaydar p. 1238 abstract

Microstructure, Structural-Phase Transformations, and Mechanical Properties of Low-Activation 12% Chromium Ferritic-Martensitic Steel EK-181 Depending on the Treatment Conditions

N. A. Polekhina, I. Y. Litovchenko, K. V. Almaeva, A. N. Tyumentsev, V. M. Chernov and M. V. Leontieva-Smirnova p. 1247 abstract

Multigroup Simulation of Protection Against Neutron and Gamma Radiation by Materials Based on Titanium Hydride

R. N. Yastrebinsky, G. G. Bondarenko, A. A. Karnauhov, A. V. Yastrebinskaya and L. V. Denisova p. 1261 abstract

Materials for Human Life Support and Environmental Protection

Synthesis and Properties of Polyacrylamide Ferrogels Filled with Magnetic Nanoparticles of Strontium Hexaferrite

E. A. Mikhnevich and A. P. Safronov p. 1270 abstract

Production and Properties of Ultrafiltration Cellulose Acetate Membranes on a Nylon Net Support

D. D. Fazullin, L. I. Fazullina and G. V. Mavrin p. 1278 abstract

Preparation of Copolymer of Allyl Ester of Salicylic Acid with Styrene and Study of Its Antifungal Properties

L. Sh. Abbasova p. 1285 abstract

Highly Porous Composite Hydrogel Materials Based on β-Ca₃(PO₄)₂/Polyethylene Glycol Diacrylate

P. V. Evdokimov, A. K. Kiseleva, A. V. Shibaev, O. E. Filippova, E. S. Novoseletskaya, A. Yu. Efimenko, I. M. Scherbakov, G. A. Shipunov, V. E. Dubrov and V. I. Putlayev p. 1290 abstract

General Purpose Materials

Investigation of Structure and Corrosion Resistance of Titanium Alloys Produced by the Method of Spark Plasma Sintering

A. V. Nokhrin, P. V. Andreev, M. S. Boldin, V. N. Chuvil’deev, M. K. Chegurov, K. E. Smetanina, A. A. Nazarov, G. V. Scherbak, A. A. Murashov and G. S. Nagicheva p. 1296 abstract

Physical and Mechanical Properties of Nitrile Butadiene Rubber Modified by Single-Walled Carbon Nanotube Concentrates

R. V. Karpunin, M. S. Korotkov, A. Yu. Skuratov and A. A. Khasin p. 1306 abstract

The Role of Manganese-substituting Ions and Oxygen Nonstoichiometry in the Formation of the Manganites Properties

V. K. Karpasyuk, A. G. Badelin, D. I. Merkulov, R. M. Eremina, F. G. Vagizov and S. Kh. Estemirova p. 1314 abstract

Composites of the Al₂O₃/Yb-TZP System Modified with Calcium, Strontium, and Barium Cations

L. I. Podzorova, V. E. Kutuzova, A. A. Il’ichyova, O. I. Pen’kova, V. P. Sirotinkin, A. A. Konovalov, O. S. Antonova and A. S. Baikin p. 1318 abstract

Study of High-Temperature Deformation Features of Ceramics of Binderless Tungsten Carbide with Various Particle Sizes

E. A. Lantsev, A. V. Nokhrin, V. N. Chuvil’deev, M. S. Boldin, Yu. V. Blagoveshchenskiy, P. V. Andreev, A. A. Murashov, K. E. Smetanina, N. V. Isaeva and A. V. Terentev p. 1324 abstract

Sorption Properties of Graphene Aerogel with Respect to Methane

A. E. Memetova, E. A. Neskoromnaya, A. D. Zelenin, A. V. Babkin, N. R. Memetov and A. V. Gerasimova p. 1333 abstract

Rheological Properties of Metal-Filled Systems Based on Low-Density Polyethylene and Aluminum

Kh. V. Allahverdiyeva, N. T. Kakhramanov and M. I. Abdullin p. 1340 abstract

Estimating the Uniformity of the Distribution of Ti₂NbAl Particles in an Aluminum-Matrix Composite Material

I. E. Kalashnikov, L. I. Kobeleva, P. A. Bykov, A. G. Kolmakov, I. V. Katin and R. S. Mikheev p. 1346 abstract

Microporous Carbon Material with High Volumetric Capacity of Methane Accumulation

A. E. Memetova, A. D. Zelenin, N. R. Memetov, A. V. Babkin and A. V. Gerasimova p. 1352 abstract

Effect of the Filler Type on the Properties of Epoxy-Anhydride Compound

Yu. M. Yevtushenko, K. M. Borisov, G. P. Goncharuk, Yu. A. Grigor’ev, I. O. Kuchkina, M. S. Piskarev and V. G. Shevchenko p. 1359 abstract

Using Composite Materials with Magnesium Matrix for Plain Bearings

A. I. Kovtunov, Yu. Yu. Khokhlov and S. V. Myamin p. 1367 abstract

New Technologies for Obtaining and Processing Materials

Electrical Contact Material Based on a Copper Powder Clad with a Fe–Cu Pseudo Alloy

A. G. Meilakh, Yu. V. Kontsevoy, E. Yu. Goida and A. B. Shubin p. 1371 abstract

Synthesis of High-Temperature Ceramics Based on Hafnium Carbide Using an Oxidative Constructing Approach

G. P. Kochanov, I. A. Kovalev, A. I. Ogarkov, S. V. Shevtsov, A. A. Konovalov, A. A. Ashmarin, A. V. Shokod’ko, A. I. Sitnikov, S. S. Strel’nikova, A. S. Chernyavskii and K. A. Solntsev p. 1376 abstract

Streamer Discharge Plasma Generator

V. S. Syssoev, M. Y. Naumova, Y. A. Kuznetsov, A. I. Orlov, D. I. Sukharevsky, L. M. Makalsky and A. V. Kukhno p. 1380 abstract

Studying Titanium Powder Obtained by SHS Hydrogenation and Dehydrogenation Using a Vacuum Furnace

N. P. Cherezov, M. I. Alymov and V. V. Zakorzhevsky p. 1385 abstract

Low-Temperature Synthesis of Barium Titanate in a Mesoporous Polyethylene Matrix

E. S. Trofimchuk, M. A. Moskvina, V. G. Shevchenko and N. I. Nikonorova p. 1391 abstract

Contact and Adhesion Properties of Polyethylene Naphthalate Films Modified by DC Discharge

M. S. Piskarev, Yu. V. Shapran, A. V. Zinoviev, A. S. Kechek’yan, A. K. Gatin, A. B. Gilman and A. A. Kuznetsov p. 1398 abstract

Creation of Composite Material Based on Titanium Dioxide with High Photocatalytic Characteristics by Oxidative Construction Approach

I. A. Kovalev, A. A. Sadovnikov, S. V. Shevtsov, N. A. Ovsyannikov, S. S. Strelnikova, A. S. Chernyavskii and K. A. Solntsev p. 1403 abstract

Synthesis and Investigation of Physical and Chemical Properties of Nanopowders and Ceramics in the La₂O₃–SrO–Ni(Co,Fe)₂O₃ System

M. V. Kalinina, D. A. Dyuskina, T. V. Khamova, L. N. Efimova and O. A. Shilova p. 1408 abstract

Protective Properties of Coatings Obtained via Microarc Oxidation in Alkaline Electrolyte Solutions

Zh. M. Ramazanova, M. G. Zamalitdinova, K. Zh. Kirgizbayeva, A. U. Akhmedyanov and A. Y. Zhakupova p. 1414 abstract

Microwave Absorbers Based on Fe and Fe–Al Particles Obtained in the Field of Rotational Magnetic Dipoles

M. D. Sosnin, I. A. Shorstkii, E. G. Sokolov, D. I. Volkhin and A. G. Vostretsov p. 1422 abstract

Energy-Efficient One-Step Synthesis of a [Re,W]/α-Al₂O₃ Ceramic Catalytic Converter for the Dehydrogenation of Ethylbenzene to Styrene

V. I. Uvarov, R. D. Kapustin, A. O. Kirillov, A. S. Fedotov and M. V. Tsodikov p. 1428 abstract

Carbide-Based Cermet Plasma Coatings TiC–Cr₃C₂–WC

V. I. Kalita, A. A. Radyuk, D. I. Komlev, V. F. Shamrai, A. B. Mikhailova, A. V. Alpatov and D. D. Titov p. 1435 abstract

Methods of Study of Properties of Materials

Study of the Impurity Composition of Isotopically Enriched Germane ⁷⁰GeH₄ by Gas Chromatography–Mass Spectrometry

A. Yu. Sozin, V. A. Krylov, O. Yu. Chernova, T. G. Sorochkina, A. D. Bulanov, O. Yu. Troshin, S. A. Adamchik and A. Yu. Lashkov p. 1446 abstract

Numerical and Experimental Simulation of the Damping Properties of Materials under Friction

Yu. S. Dubinov, O. Yu. Elagina, O. B. Dubinova and A. K. Kuznetsov p. 1454 abstract

Contents