Vol. 11, No. 5, 2020

Inorganic Materials: Applied Research

Physicochemical Principles of Creating Materials and Technologies

Designing the Composition of a Cement-Based 3D Construction Printing Material

V. A. Poluektova p. 1013 abstract

Paramagnetic Meissner Effect in the Magnetic Superconductor DyRh_3.8Ru_0.2B₄

G. S. Burkhanov, S. A. Lachenkov and E. P. Khlybov p. 1020 abstract

The Investigation of the Dependence of Optical, Luminescent, and Emission Properties of Carbon Nanoparticles on pH of the Medium

S. A. Kazaryan, V. N. Nevolin, G. G. Kharisov and N. F. Starodubtsev p. 1025 abstract

Sintering Diagrams of Titanium Powders

M. I. Alymov, S. I. Averin and S. V. Semichev p. 1041 abstract

Materials for Aerospace Technology

Development of Heat Resistant Aluminum Composite with Minor Addition of Alumina Nanofibers (Nafen™)

L. E. Agureev, I. N. Laptev, B. S. Ivanov, A. I. Kanushkin, V. I. Kostikov, R. N. Rizakhanov, Zh. V. Eremeeva, A. A. Ashmarin, A. V. Ivanov, E. A. Vysotina and G. V. Panasova p. 1045 abstract

Layered Self-Healing Composite Material with an Internal Functional Layer Based on Borosiloxane

N. N. Sitnikov, I. A. Khabibullina, V. I. Mashchenko, A. V. Shelyakov, K. S. Mostovaya and E. A. Vysotina p. 1051 abstract

Electronic Engineering Materials

Electrophysical Properties of 2 Co–Ti–Al Alloy Produced by SHS Pressing

M. L. Busurina, A. V. Karpov, V. A. Shcherbakov, A. N. Gryadunov, N. V. Sachkova and A. E. Sychev p. 1060 abstract

Effect of Oxygen Nonstoichiometry on Phase Separation, Structure, and Magnetic Properties of the Complex Oxide NdSr₂Mn₂O₇

O. M. Fedorova, L. B. Vedmid’ and S. A. Uporov p. 1065 abstract

Creation of Buried Heterostructures for Microwave Laser Diodes

M. G. Vasil’ev, A. M. Vasil’ev, Yu. O. Kostin, A. D. Izotov and A. A. Shelyakin p. 1071 abstract

Formation of Oxygen-Containing Centers in Irradiated Silicon Crystals during Annealing in the Temperature Range of 450–700°С

E. A. Talkachova, L. I. Murin, I. F. Medvedeva, F. P. Korshunov and V. P. Markevich p. 1078 abstract

Materials of Power Engineering and Radiation-Resistant Materials

Concentration and Diffusion Characteristics of Interstitial C, O, N Atoms and Elastic Modulus in Vanadium and in V–4Cr–4Ti, V–W–Cr, V–Ta–Cr–Zr Alloys

K. A. Moroz, V. M. Chernov, M. M. Potapenko, V. A. Drobyshev and M. V. Kravtsova p. 1083 abstract

Damage and Deformation Effects in the Surface Layers of Copper and Copper–Gallium Alloy under Pulsed Irradiation in a Plasma Focus Unit

I. V. Borovitskaya, V. A. Gribkov, A. S. Demin, N. A. Yepifanov, S. V. Latyshev, S. A. Maslyaev, Ye. V. Morozov, V. N. Pimenov, I. P. Sasinovskaya, G. G. Bondarenko, A. I. Gaidar and M. Scholz p. 1093 abstract

Segregation of Alloying Elements on Small-Angle Grain Boundaries in Ferritic-Martensitic Steels under Ion Irradiation

S. V. Rogozhkin, N. A. Iskandarov, A. A. Nikitin, A. A. Khomich, V. V. Khoroshilov, A. A. Bogachev, A. A. Lukyanchuk, O. A. Raznitsyn, A. S. Shutov, T. V. Kulevoy, P. A. Fedin, A. A. Potekhin and A. G. Zaluzhnyi p. 1103 abstract

Materials for Ensuring Human Vital Activity and Environmental Protection

Mechanism of Inversion of Montmorillonite Sorption Properties by Cationic Surfactant

T. V. Kon’kova, A. P. Rysev and E. V. Mishchenko p. 1110 abstract

The Investigation of the Influence of Low-Temperature Plasma and Steam Sterilization on the Properties of Track Membranes Made of Polyethylene Terephthalate

E. O. Filippova, D. A. Karpov, V. F. Pichugin and M. Ulbricht p. 1116 abstract

Template Synthesis of Calcium Phosphates in Nanoporous Polyolefin Films Obtained via Crazing Mechanism

M. A. Moskvina, E. S. Trofimchuk, F. I. Grabovenko, N. I. Nikonorova and A. L. Volynskii p. 1124 abstract

Effect of Ozone and Ultraviolet Radiation on Structure of Fibrous Materials Based on Poly(3-hydroxybutyrate) and Polylactide

A. A. Olkhov, S. G. Karpova, P. M. Tyubaeva, A. L. Zhulkina, Yu. N. Zernova and A. L. Iordanskii p. 1130 abstract

Highly Filled Compositions Based on Alginate Gel and Fine Tricalcium Phosphate for 3D Printing of Tissue-Engineered Matrices

A. V. Mironov, O. A. Mironova, A. O. Mariyanats, V. S. Komlev, I. V. Smirnov, E. Y. Kananykhina, T. Kh. Fatkhudinov and V. K. Popov p. 1137 abstract

Hybrid Tricalcium Phosphate/Hydrogel Constructs Functionalized with an Antitumor Drug for Bone Tissue Regeneration

P. A. Karalkin, N. S. Sergeyeva, I. K. Sviridova, V. A. Kirsanova, S. A. Akhmedova, Ya. D. Shansky, N. V. Leontyev, D. M. Zuyev, E. S. Klimashina, P. V. Yevdokimov and V. I. Putlyaev p. 1144 abstract

Fabrication of Microdispersed Tissue-Specific Decellularized Matrix from Porcine Articular Cartilage

Yu. B. Basok, A. D. Kirillova, A. M. Grigoryev, L. A. Kirsanova, E. A. Nemets and V. I. Sevastianov p. 1153 abstract

Separation of Oil Emulsion Using Polyacrylonitrile Membranes, Modified by Corona Discharge

I. G. Shaikhiev, V. O. Dryakhlov, M. F. Galikhanov, D. D. Fazullin and G. V. Mavrin p. 1160 abstract

General-Purpose Materials

Structure and Properties of Ti₂₈Ni₅₀Hf₂₂ Powder Alloy

S. S. Volodko, S. N. Yudin, V. V. Cheverikin, A. V. Kasimtsev, G. V. Markova, T. A. Sviridova, B. V. Karpov, S. S. Goncharov and I. A. Alimov p. 1165 abstract

Influence of the Introduction of Rare Earth Metal on the Strength of Aluminum Electrodes

I. Yu. Gots and V. O. Lukyanova p. 1173 abstract

Properties of Nanocomposites of High-Pressure Polyethylene with Metal-Containing Nanofillers

N. I. Kurbanova, T. M. Guliyeva and N. Ya. Ishenko p. 1180 abstract

Thermomechanical Properties of Nanocomposites Based on Clinoptilolite and a Copolymer of Ethylene with Hexene

N. T. Kakhramanov, I. V. Bayramova and S. S. Pesetsky p. 1184 abstract

Effect of Addition of Carbon Nanotubes on Electrical Conductance and Heat Dissipation of Elastomers at Flow of Direct Current

A. V. Shchegolkov, V. S. Yagubov, Yu. A. Khan and F. F. Komarov p. 1191 abstract

TiC–Cr₃C₂–WC–TiB₂–SiC-Based Cermets

V. I. Kalita, A. A. Radyuk, D. I. Komlev, A. B. Mikhailova, A. V. Alpatov, T. R. Chueva, N. V. Gamurar and D. D. Titov p. 1199 abstract

Membranes of Palladium Alloys for Ultrapure Hydrogen Production

N. R. Roshan, S. V. Gorbunov, E. M. Chistov, F. R. Karelin, K. A. Kuterbekov, K. Zh. Bekmyrza and E. T. Abseitov p. 1214 abstract

New Technologies for Design and Processing of Materials

Study of the Features of Obtaining Bimetallic Pipes and Rods by Explosion Welding with Subsequent Hot Deformation

A. Yu. Malakhov, I. V. Saikov, I. V. Denisov, G. R. Saikova, Yu. V. Gamin, B. A. Romantsev and P. Yu. Gulyaev p. 1222 abstract

Liquid-Phase Synthesis and Physical and Chemical Properties of Ceramic Electrolyte Nanomaterials in the CeO₂–Sm₂O₃ System for Solid Oxide Fuel Cells

M. V. Kalinina, D. A. Duskina, N. Yu. Kovalko, S. V. Myakin, M. Yu. Arsent’ev, N. A. Khristyuk and O. A. Shilova p. 1229 abstract

Method of Absorbing Material Formation Based on Magnetically Controlled Particles of Fe₃O₄

I. A. Shorstkii and N. Yakovlev p. 1236 abstract

Synthesis of Dispersed Mesoporous Powders of Solid Solution Zr_0.88Ce_0.12O₂ for Catalyst Carrier of the Conversion of Methane to Synthesis-Gas

L. V. Morozova and I. A. Drozdova p. 1244 abstract

Methods of Study of Properties of Materials

Fractal Dimension of the Fracture Surface of Porous ZrO₂–MgO Composite

A. S. Buyakov, Yu. A. Zenkina, S. P. Buyakova and S. N. Kulkov p. 1253 abstract

Performance Characteristics of Carbide Coatings Obtained by High-Speed Gas-Flame Spraying

O. Yu. Elagina, A. K. Prygaev and I. V. Volkov p. 1260 abstract

Contents