Vol. 10, No. 5, 2019

Inorganic Materials: Applied Research

Physicochemical Principles of Creating Materials and Technologies

Use of Constants of Carbon and Ultrahigh-Molecular-Weight Polyethylene Fiber for Calculation of Density of Unidirectional Composites

V. I. Mamonov and I. K. Krylov p. 1015 abstract

A New Approach to Development of Photochromic Composites Based on Hydrated Tungsten(VI) Oxide Particles and Cellulose Matrix

P. F. Prokopovich, E. S. Kirillova and V. A. Gurtov p. 1023 abstract

Materials for Aerospace Technology

Investigation of a High-Temperature Nb-Based Composite Material Mechanically Doped with Si

B. V. Shchetanov, D. V. Graschenkov, I. U. Efimochkin, S. V. Paegle and R. M. Dvoretskov p. 1033 abstract

Electronic Engineering Materials

Magnetic Field Production Abilities of Thermoelectric Materials Based on Layered Crystals of the Family [(Ge, Sn, Pb) Te]_m [(Bi, Sb)₂ (Te, Se)₃]_n (m, n = 0, 1, 2, …) with Non-Isovalent Cationic Substitution

M. A. Korzhuev, E. S. Avilov and M. A. Kretova p. 1039 abstract

Thermoelectric and Elastic Properties of Carbon Nanotubes Irradiated with High-Energy Electrons

G. Yu. Mikhailova, M. M. Nishchenko, V. N. Pimenov, E. E. Starostin and V. I. Tovtin p. 1052 abstract

The Kinetics of Growth of a Nanosized Germanium Film Deposited on the Si(001) Surface by Magnetron Sputtering

I. S. Monakhov and G. G. Bondarenko p. 1058 abstract

Effect of Microimpurities on the Electronic Structure and Emission Properties of Microwave Device Cathode Materials

V. I. Kapustin, I. P. Li, A. V. Shumanov, S. O. Moskalenko and V. I. Svitov p. 1065 abstract

Effect of Preparation and Reduction on Specific Surface Electrical Resistance of Thin Films Obtained from Graphene Oxide Dispersion

D. Yu. Kornilov and L. A. Kasharina p. 1072 abstract

Materials of Power Engineering and Radiation-Resistant Materials

Effect of Low-Temperature Ion Irradiation on the Nanostructure of 12% Chromium ChS-139 Steel

S. V. Rogozhkin, N. A. Iskandarov, A. A. Nikitin, A. A. Bogachev, A. A. Khomich, V. V. Khoroshilov, A. A. Lukyanchuk, O. A. Raznitsyn, A. S. Shutov, P. A. Fedin, T. V. Kulevoy, M. V. Leontyeva-Smirnova and E. M. Mozhanov p. 1078 abstract

Materials for Ensuring Human Vital Activity and Environmental Protection

Ceramic Porous Materials with Catalytic Properties

M. S. Kanapinov, G. M. Kashkarov, T. V. Novoselova, A. A. Sitnikov and N. P. Tubalov p. 1085 abstract

Comparison of Impregnated Bone Morphogenetic Protein-2 Release Kinetics from Biopolymer Scaffolds

A. V. Vasilyev, T. B. Bukharova, V. S. Kuznetsova, Yu. D. Zagoskin, S. A. Minaeva, T. E. Grigoriev, E. N. Antonov, E. O. Osidak, E. V. Galitsyna, I. I. Babichenko, S. P. Domogatsky, V. K. Popov, S. N. Chvalun, D. V. Goldshtein and A. A. Kulakov p. 1093 abstract

Stereolithographic 3D Printing of Bioceramic Scaffolds of a Given Shape and Architecture for Bone Tissue Regeneration

V. I. Putlyaev, P. V. Yevdokimov, S. A. Mamonov, V. N. Zorin, E. S. Klimashina, I. A. Rodin, T. V. Safronova and A. V. Garshev p. 1101 abstract

Effect of t-ZrO₂-Based Ceramic Samples on the Condition of Muscular and Connecting Tissues in Experimental Animals with Intramuscular Introduction

N. Yu. Kovalko, M. V. Kalinina, D. N. Suslov, O. V. Galibin, G. Yu. Yukina, M. Yu. Arsentyev and O. A. Shilova p. 1109 abstract

Features of β-Phase Decay in Ti–22Nb–6Zr Alloy

S. N. Yudin, A. V. Kasimtsev, N. Yu. Tabachkova, T. A. Sviridova, G. V. Markova, S. S. Volod’ko, I. A. Alimov, A. V. Alpatov and D. D. Titov p. 1115 abstract

General-Purpose Materials

Mechanical Properties of Structural Carbon-Carbon Layered Material at High Temperatures

G. E. Mostovoy, A. P. Karpov and I. V. Shishkov p. 1123 abstract

Synthesis of Cu–Cr Composite Alloys with a Layered Structure Featuring High Arc Resistance

L. E. Bodrova, S. Yu. Melchakov, A. B. Shubin, E. Yu. Goida and L. A. Marshuk p. 1129 abstract

Highly Efficient Plasticizers-Antipirenes for Epoxy Polymers

A. S. Mostovoy, A. S. Nurtazina, Yu. A. Kadykova and A. Z. Bekeshev p. 1135 abstract

Heat Emission Kinetics and Hydration Behavior of Modified Polymer–Cement Mixtures for 3D Printing Construction

V. A. Poluektova, N. A. Shapovalov and N. I. Novosadov p. 1140 abstract

Cermet Plasma Coatings Based on Silicon Carbide

V. I. Kalita, A. A. Radyuk, D. I. Komlev, A. B. Mikhailova, A. Yu. Ivannikov, A. V. Alpatov, T. R. Chuyeva, N. V. Umnova and D. D. Titov p. 1145 abstract

Synthetic Titanosilicate Additives for Special Cement Composites

V. V. Tyukavkina, L. G. Gerasimova and A. V. Tsyryateva p. 1153 abstract

Effects of Low-Modulus BN Inclusions on Properties of Y-TZP Ceramic

A. S. Buyakov, Yu. A. Mirovoy and S. P. Buyakova p. 1159 abstract

Physical and Chemical Properties of Polyporphyrin Films Based on the Mn Complexes of Amino-Substituted Tetraphenylporphyrin

M. V. Tesakova, A. V. Balmasov and V. I. Parfenyuk p. 1164 abstract

Research of Titanium Saturation with Gas and Feature of Ceramic Layer Formation Using the Oxidative Constructing Approach

V. Yu. Zufman, A. V. Shokodko, I. A. Kovalev, A. A. Ashmarin, A. I. Ogarkov, N. A. Ovsyannikov, A. A. Klimov, S. N. Klimaev, G. P. Kochanov, E. A. Shokodko, A. A. Chesnokov, A. S. Chernyavskii and K. A. Solntsev p. 1171 abstract

Composite Binders for Concretes with Improved Impact Endurance

R. S. Fediuk, A. V. Mochalov, D. N. Pezin and Yu. L. Liseitsev p. 1177 abstract

Advanced Materials for Separation and Purification of Gas Mixtures in Cyclic Adsorption Processes

N. V. Posternak, Yu. A. Ferapontov, L. L. Ferapontova, E. I. Akulinin and S. I. Dvoretsky p. 1185 abstract

New Technologies for Design and Processing of Materials

The Influence of Aluminum Nitride Nanoparticles on the Structure, Phase Composition, and Properties of TiB/Ti-Based Materials Obtained by SHS Extrusion

A. V. Bolotskaia, M. V. Mikheev, P. M. Bazhin, A. M. Stolin and Yu. V. Titova p. 1191 abstract

Synthesis of Homogeneous Doping with Zinc Charge of Lithium Niobate and Comparative Study of LiNbO₃:Zn Crystals of Different Genesis

N. V. Sidorov, L. A. Bobreva, S. M. Masloboeva, N. A. Teplyakova, M. N. Palatnikov and N. N. Novikova p. 1196 abstract

Synthesis of Composite Material in Al–Ti–B System during Combustion of Titanium and Boron Powders and Aluminum-Clad Granules of VT6 Alloy

M. A. Ponomarev and V. E. Loryan p. 1204 abstract

The Formation of the Surface Layers of a VT6 Titanium Alloy by Ion Beam Mixing of Carbon Nanofilms

V. L. Vorobyov, A. A. Kolotov, A. L. Ulyanov, F. Z. Gilmutdinov, P. V. Bykov, S. G. Bystrov and V. Ya. Bayankin p. 1213 abstract

State of the Art and Prospect for Recycling of Waelz Slag from Electric Arc Furnace Dust Processing

P. I. Grudinsky, D. V. Zinoveev, V. G. Dyubanov and P. A. Kozlov p. 1220 abstract

A Combined Method for Synthesis of Dense Nanoceramics Based on Aluminum Oxide

L. V. Morozova and I. A. Drozdova p. 1227 abstract

Investigation of Formation of Titanium–Copper Coatings upon Argon Arc Surfacing of Silicon Bronze on Titanium

A. I. Kovtunov, T. V. Semistenova, A. M. Ostryanko and A. G. Bochkarev p. 1235 abstract

Technological Characteristics of Injection Molding of Dynamic Elastoplasts Based on Thermoplastic Polyolefins and Butyl Rubber

N. T. Kakhramanov, Z. N. Huseynova, V. S. Osipchik and R. V. Kurbanova p. 1239 abstract

Granulated Sorption Material Based on Cellulose for Extracting Silver from Thiocyanate Solutions

Ya. B. Koval’skaya, L. D. Ageeva, V. V. Guzeev, E. A. Zelichenko and O. A. Gurova p. 1245 abstract

Chlorination of Alumina Obtained from Nepheline Concentrate Processing and Comparative Assessment of the Complete Aluminum Production Cycle

T. N. Vetchinkina and B. G. Balmaev p. 1249 abstract

Synthesis of Hard-Magnetic Material of the Fe–Cr–Co System Made of a Spherical Powder

V. A. Zelenskii, A. B. Ankudinov, I. M. Milyaev and M. I. Alymov p. 1254 abstract

Methods of Study of Properties of Materials

Use of Experimentally Determined Parameters of the Cohesive Zone in the Numerical Evaluation of the Resistance to Delamination of Polymer Composites Materials

P. G. Babayevsky, N. V. Salienko and G. V. Novikov p. 1259 abstract

Contents