Contents

Inorganic Materials: Applied Research

Vol. 9, No. 5, 2018

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Inorganic Materials: Applied Research ISSN 2075-1133.

Physicochemical Principles of Creating Materials and Technologies

Composite Bilayer Polymer Membranes with Hydrophobic Layers

L. I. Kravets, V. A. Altynov, V. F. Zagonenko, N. E. Lizunov, V. Satulu, B. Mitu and G. Dinescu p. 777  abstract

Prospects of Application of Self-Healing Materials and Technologies Based on Them

N. N. Sitnikov, I. A. Khabibullina, V. I. Mashchenko and R. N. Rizakhanov p. 785  abstract

Electronic Engineering Materials

Manufacturing Transparent Conducting Films Based on Directly Exfoliated Graphene Particles via Langmuir–Blodgett Technique

E. A. Danilov, V. M. Samoilov, V. S. Dmitrieva, A. V. Nikolaeva, D. V. Ponomareva and E. I. Timoshchuk p. 794  abstract

Synthesis and Electrochemical Properties of Lithium Titanate

S. E. Smirnov, V. A. Zhorin, M. R. Kiselev, S. S. Smirnov and N. A. Yashtulov p. 803  abstract

Systems of Manganites with Enhanced Electromagnetic Parameters

V. K. Karpasyuk, A. G. Badelin, I. M. Derzhavin and D. I. Merkulov p. 807  abstract

Study of Linear Light Edge-Emitting Diodes Based on InP/InGaAsP/InP Heterostructure with the Crescent Active Region

M. G. Vasil’ev, A. M. Vasil’ev, Yu. O. Kostin, A. A. Shelyakin and A. D. Izotov p. 813  abstract

Quantum Electronic and Photonic Materials

Physicochemical and Optical Characteristics of LiNbO3 Single-Crystals Doped with Boron

M. N. Palatnikov, N. V. Sidorov, R. A. Titov, N. A. Teplyakova and O. V. Makarova p. 817  abstract

Materials of Power Engineering and Radiation-Resistant Materials

Structural Features of Mineral Crystalline Phases and Defectiveness of Bismuth Organosiliconate Crystals at High Temperatures

R. N. Yastrebinskii, G. G. Bondarenko and A. V. Pavlenko p. 825  abstract

Surface Structure Transformation in Double Forged Tungsten upon Single and Sequenced Irradiation Using Different Types of Radiation Facilities

E. V. Demina, V. A. Gribkov, M. D. Prusakova, V. N. Pimenov, E. V. Morozov, S. A. Maslyaev, A. V. Voronin, V. K. Gusev, I. E. Garkusha, V. A. Makhlai, T. Laas, V. Shirokova and B. Vali p. 832  abstract

Combined Action of Fast Neutrons and Operational Factors on Reliability of Infrared LEDs

A. V. Gradoboev, A. V. Simonova and K. N. Orlova p. 848  abstract

Materials for Ensuring Human Vital Activity and Environmental Protection

Shear Strength of the Cylindrical Titanium Implant–Plastic System

A. I. Mamayev, V. A. Mamayeva, V. I. Kalita, D. I. Komlev, A. A. Radyuk, A. Yu. Ivannikov, A. B. Mikhaylova, A. S. Baikin, M. A. Sevostyanov and N. A. Amel’chenko p. 855  abstract

Tetrafluoroethylene Telomeres Used to Prepare Fluorine-Containing Hydrophobic Silica Fabric

G. A. Kichigina, P. P. Kushch, E. A. Krivonogova, D. P. Kiryukhin, V. G. Dorohov and V. V. Barelko p. 861  abstract

Promising NiO–30 wt % Ag–40 wt % Bi2O3 Membrane Material for Separation of Oxygen from Air

I. V. Kulbakin and S. V. Fedorov p. 868  abstract

Biomedical Materials Based on Polymer-Colloid Dispersion of Succinamide Chitosan-Sol of Silver Iodide

D. R. Valiyev, M. V. Bazunova, V. V. Chernova, A. S. Shurshina and E. I. Kulish p. 873  abstract

Porous Carbonated Hydroxyapatite Ceramics Obtained by the Original Method of “Ceramic Biscuit” for Medicine

I. V. Fadeeva, A. S. Fomin, Ya. Yu. Filippov, S. A. Bozhkova, D. V. Labutin and S. M. Barinov p. 879  abstract

Comparative Analysis of the Properties of Hydroxyapatite Powders Prepared by Different Techniques

E. A. Zelichenko, V. V. Guzeev, Ya. B. Kovalskaya, O. A. Gurova and T. I. Guzeeva p. 884  abstract

General-Purpose Materials

Influence of Graphitization Conditions at 3000°C on Structural and Mechanical Properties of High-Modulus Polyacrylonitrile-Based Carbon Fibers

V. M. Samoilov, D. B. Verbets, I. A. Bubnenkov, N. N. Steparyova, A. V. Nikolaeva, E. A. Danilov, D. V. Ponomareva and E. I. Timoshchuk p. 890  abstract

Magnetic Properties of the Sm(Co0.45Fe0.15Cu0.40)5 Alloy Prepared by Strip Casting

A. A. Lukin, N. B. Kolchugina, Yu. S. Koshkid’ko, A. V. Kamynin and D. Yu. Vasilenko p. 900  abstract

Porous Refractory Ceramics as a Protective Material in Explosive Loading of Metal Container

R. D. Kapustin and P. A. Nikolaenko p. 906  abstract

Effect of Mechanical Treatment on the Structure and Properties of Natural Zeolite

A. Y. Buzimov, S. N. Kulkov, L. A. Gömze, R. Géber and I. Kocserha p. 910  abstract

Impact of the Structure on Mechanical and Tribological Properties of Sintered (Al–12 Si)–40 Sn Alloy

N. M. Rusin and A. L. Skorentsev p. 916  abstract

New Technologies for Design and Processing of Materials

Tuning the Properties of Refractory Carbide Nanopowders

Yu. V. Blagoveshchenskiy, N. V. Isaeva, M. A. Sinaiskiy, A. B. Ankudinov and V. A. Zelensky p. 924  abstract

Effect of Drying Methods of Alumina Powder and Graphene Oxide Mixture on the Mechanical and Electrical Properties of Sintered Composites Fabricated by Spark Plasma Sintering

P. V. Fokin, N. W. Solis Pinargote, E. V. Kuznetsova, P. Y. Peretyagin and A. Smirnov p. 930  abstract

Conditions for the Production of Active Aluminum Oxide Meeting the Requirements of Prospective Chloride Technology

T. N. Vetchinkina p. 937  abstract

Properties of Electrolytic Silver-Based Alloy

V. I. Balakai, A. V. Arzumanova, A. V. Starunov and I. V. Balakai p. 947  abstract

Synthesis and Characterization of Supercapacitor Electrode Materials Based on Carbon Fiber Materials and Metal Oxyhydroxides

S. I. Yusin and O. V. Karunina p. 954  abstract

Frame Catalysts of Al2O3–ZrO2–CeO2 System

L. I. Podzorova, S. G. Chuklina, A. A. Il’icheva, A. A. Konovalov, O. I. Pen’kova, S. A. Maslenkova and A. I. Pylinina p. 960  abstract

Thermal Stability of Structure and Properties of the Surface Layer of Instrumental Steel Alloyed with Zirconium and Silicon Atoms under the Action of Compression Plasma Flows

N. N. Cherenda, V. V. Uglov, S. V. Gusakova, V. M. Astashynski and A. M. Kuzmitski p. 965  abstract

Dielectric Properties of Multilayer Optically Transparent TiO2-Nanosilver Coating on Polyester Substrate Obtained by Solvent Method

O. I. Davydova, T. V. Gerasimova, E. P. Grishina, O. L. Evdokimova, K. V. Ivanov, A. S. Kraev and A. V. Agafonov p. 973  abstract

Mesoporous Powders for Catalyst Supports Produced from Al2O3–ZrO2 (Y2O3) System

L. V. Morozova, I. A. Drozdova, T. V. Khamova and I. G. Polyakova p. 978  abstract

Chemical Vapor Deposition of Wear-Resistant Iron-Nickel Coating onto Precision Parts of Hydraulic Systems

L. V. Kozyreva, V. V. Kozyrev and N. N. Chupyatov p. 985  abstract

Investigation Methods of Matherial Properties

Combined Research of Dispersed Precipitates in High-Strength Steel

M. L. Fedoseev, M. S. Mikhailov, N. F. Drozdova, S. N. Petrov and A. N. Matvienko p. 990  abstract