Vol. 7, No. 5, 2016
A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Inorganic Materials: Applied Research ISSN 2075-1133.
“Thick” Amorphous Wires in the Fe75Si10B15–Co75Si10B15–Ni75Si10B15 System: Fabrication, Structure, Properties
p. 643 abstract
MD Simulation of Primary Radiation Damage in Metals with Internal Structure
p. 648 abstract
Synthesis and Study of Solid Solutions Based on Indium Oxide in the In2O3–ZrO2(HfO2) Systems as a Material for Fuel Cell Interconnectors
p. 658 abstract
Influence of Low-Temperature Plasma and γ Radiation on the Surface Properties of PET Track Membranes
p. 664 abstract
Modification of the Ferrous and Nonferrous Metals in the Process of Pinch Discharges in the Water Vapor
p. 673 abstract
Structure and Strength Properties of the Cold-Deformed Al–Mg2Si-Based Alloys with Additives of Transition Metals
p. 682 abstract
Powder Aluminum Composites of Al–Cu System with Micro-Additions of Oxide Nanoparticles
p. 687 abstract
Effect of Charge Mixture Preparation Technology on the Physicochemical and Optical Properties of LiNbO3:Mg Crystals
p. 691 abstract
Aging of Rapidly Solidified Eutectic Alloys Sn–Bi, Sn–Pb, and Bi–Cd
p. 698 abstract
Kinetics of α'-Phase Growth and Coagulation under Thermal Aging of Fe–22% Cr Alloy
p. 704 abstract
Influence of Technological Defects and Neutron Irradiation on the Mechanical Properties of Single-Crystal Molybdenum Pipes
p. 708 abstract
Effect of Power Pulses of Deuterium Plasma on the Structure and Mechanical Properties of Chromium Steel
p. 713 abstract
Radiation Resistance of Structural Radiation-Protective Composite Material Based on Magnetite Matrix
p. 718 abstract
Modified Composites of Al2O3–(Ce-TZP) System as Materials for Medical Use
p. 724 abstract
Radiation-Chemical Synthesis of Silver Nanoparticles in Aqueous Solution of Chitin Derivative
p. 730 abstract
Assessment of the Chemical Risk Factor for Application of Artificial Cardiac Pacemakers Equipped with a Head Made of Thermoplastic Polyurethane Compound
p. 737 abstract
Projection Stereolithography of Biocompatible Polymer Structures
p. 745 abstract
Effect of Annealing on the Structure and Phase Transformation in ZrO2–MgO Ceramic Powders
p. 750 abstract
High-Temperature Electrical Conductivity of GdxTiyZrzCe1–x–y–zO2 Solid Solutions
p. 756 abstract
Embrittlement Mechanisms and Magnetic Properties Optimization Conditions in Amorphous Co69Ge3.7Cr3.8Si12.5B11 Alloy without Ductile-Brittle Transition
p. 760 abstract
Fireproof Foamed Epoxy Polymers
p. 768 abstract
Special Features of Surface Fluorination of Thermoplastic Polyurethane Elastomers and Its Effect on the Polymer Properties
p. 773 abstract
Physicochemical Studies on the Thermal Hydrolysis of Aluminum Chloride
p. 779 abstract
Modification of a Hard Alloy Cermet Structure upon Pulsed Electron-Ion-Plasma Irradiation
p. 786 abstract
Autowave Synthesis of Cast Oxide Ceramics Al2O3–Cr2O3 · ZrO2
p. 791 abstract
Deposition of Multicomponent Filmlike Coating on Metal Substrate Using Plasma Focus Device
p. 796 abstract
Determination of the Surface Structure Peculiarities of Nanoscale Metal Particles via Small-Angle X-ray Scattering
p. 804 abstract