Vol. 14, No. 5-6, 2023

Inorganic Materials: Applied Research

Physicochemical Foundations of Development of Materials and Technologies

Effects of Electron Beam Processing on Fatigue Fracture Propagation Pattern and Formation of Deformation Zone on the Fracture Surface in Titanium Nickelide

S. N. Meisner and L. L. Meisner p. 1141 abstract

Welding of High-Nitrogen Austenitic Steels (Review)

V. S. Kostina and M. V. Kostina p. 1152 abstract

Traditional and New Approaches to the Creation of Biomedical Materials Based on Polyhydroxyalkanoates with Antimicrobial Activity

P. M. Tyubaeva, A. A. Popov and A. A. Olkhov p. 1165 abstract

Study of the Conditions for Obtaining Precursors Intended for 3D Technologies from a Heat-Resistant Alloy Based on RuAl

K. B. Povarova, A. A. Drozdov, A. V. Samokhin, O. A. Skachkov, A. A. Fadeev, A. A. Dorofeev, V. P. Sirotinkin, A. A. Ashmarin, M. A. Bulakhtina, A. V. Antonova and A. E. Morozov p. 1186 abstract

Thin Nanostructured n-WSe₂ Films and Their Application in Semiconductor p-Si Photocathodes for Hydrogen Production by Water Splitting

O. V. Rubinkovskaya, D. V. Fominski, V. N. Nevolin, R. I. Romanov, P. F. Kartsev, Hualing Jiang and V. Yu. Fominski p. 1198 abstract

Materials for Aviation and Space Techniques

Processes on the Glass Surface under Irradiation with Medium-Energy Electrons

R. H. Khasanshin and L. S. Novikov p. 1207 abstract

Studying Weldability in Semi-Finished Products Made of an Al–Mg–Si–Cu Alloy

Yu. S. Oglodkova, K. V. Antipov, M. D. Panteleev and A. S. Rudchenko p. 1214 abstract

Electronic Materials

Chalcogenides of Bismuth Obtained by Various Methods

L. D. Ivanova, Yu. V. Granatkina, I. Yu. Nikhezina, A. G. Malchev, M. I. Zaldastanishvili, S. P. Krivoruchko, O. N. D’yakonov and R. A. Karima p. 1220 abstract

Features of Defect Structure and Photoluminescence of Nominally Pure LiNbO₃ Crystals Grown from a Boron-Doped Charge

N. V. Sidorov, A. V. Kadetova, M. V. Smirnov, R. A. Titov, N. A. Teplyakova and M. N. Palatnikov p. 1228 abstract

Ion-Beam-Assisted Formation of the Silver-Containing Surface of Porous Silicon

V. V. Perinsky, I. V. Perinskaya, I. V. Rodionov and L. E. Kuts p. 1237 abstract

Studying the Mechanical Properties and Structure of the Silver–Polyethylene Terephthalate Composite

D. V. Panov p. 1245 abstract

Materials for Human Life Support and Environmental Protection

Study of the pH Effect on the Sorption Properties of Nanostructured Graphene-Containing Composite Materials Modified with Polyaniline for Removal of Various Chemical Nature Polutants

T. S. Kuznetsova, T. V. Pas’ko, A. E. Burakov, I. V. Burakova, E. S. Mkrtchyan, O. A. Ananyeva and A. G. Tkachev p. 1251 abstract

Low-Temperature Aging of Al₂O₃–[ZrYb]O₂ Composites Containing Strontium Hexaaluminate

L. I. Podzorova, A. A. Il’icheva, O. I. Pen’kova, V. P. Sirotinkin, O. S. Antonova, A. S. Baikin and G. P. Kochanov p. 1257 abstract

Physicochemical, Structural, and Surface Properties of Silicon Dioxide Produced from Mineral Raw Materials

D. V. Mayorov and Yu. O. Velyaev p. 1263 abstract

Studying an Iron Oxide Nanopowder as a Bioactive Material

V. S. Kataev, M. A. Fedotov, N. A. Andreeva, A. A. Fomina, V. A. Volchenkova and A. A. Alpatov p. 1270 abstract

Effects of Mesenchymal Stem Cells on the Physical and Mechanical Properties of Polyester Scaffolds of Various Architectonics

I. V. Arutyunyan, A. G. Dunaev, E. M. Trifanova, M. A. Khvorostina, A. V. Elchaninov, A. G. Soboleva, T. H. Fatkhudinov and V. K. Popov p. 1275 abstract

The Effect of the Porosity of Materials Based on Tricalcium Phosphate on the Behavior of Mesenchymal Stem Cells

P. V. Evdokimov, A. K. Kiseleva, D. S. Larionov, E. S. Novoseletskaya, A. Yu. Efimenko, I. M. Scherbakov, G. A. Shipunov, V. E. Dubrov and V. I. Putlayev p. 1285 abstract

Behavior of Dopant Ions in the Solution Synthesis of Substituted Calcium Phosphates

I. V. Fadeeva, A. A. Forysenkova, V. A. Volchenkova, A. A. Fomina, V. B. Smirnova and S. M. Barinov p. 1292 abstract

Methane Adsorption Properties of a Functional Porous Material Based on Coffee Waste

A. E. Memetova, A. D. Zelenin, N. R. Memetov, V. S. Yagubov, N. A. Chapaksov, R. A. Stolyarov, A. V. Gerasimova and E. S. Mkrtchyan p. 1298 abstract

General Purpose Materials

Structure and Magnetic Properties of (Sm,Zr)(Co,Fe,Cu)_z Alloy Powders for Bonded Magnets

N. B. Kolchugina, N. A. Dormidontov, P. A. Prokofev, Yu. V. Milov, A. S. Andreenko, I. A. Sipin, A. G. Dormidontov and A. S. Bakulina p. 1305 abstract

Synthesis, Structure, and Properties of Diboride Solid Solutions (Hf_{1 –} _xTa_x)B₂

V. V. Kurbatkina, E. I. Patsera, T. A. Sviridova, P. A. Loginov, D. A. Sidorenko, A. S. Kolva and E. A. Levashov p. 1312 abstract

Choice of Accelerators of the Vulcanization Group for Rubbers Based on Epichlorohydrin Rubber

M. L. Davydova, A. R. Khaldeeva, A. F. Fedorova and M. D. Sokolova p. 1321 abstract

Methane Sorption Capacity of a Carbon Material Based on Polymer Raw Materials

A. E. Memetova, A. D. Zelenin, N. R. Memetov, A. V. Gerasimova, V. S. Yagubov, R. A. Stolyarov and N. A. Chapaksov p. 1327 abstract

Changes in the Microstructure and Hardness after Heat Treatment of a Billet Made of Powder High-Speed Steel R6M5K5 Containing a Diffusion-Alloyed Additive

A. S. Akhmetov and Zh. V. Eremeeva p. 1335 abstract

Investigation of the Influence of Carbon Fillers on the Manifestation of the Effect of Tensoresistivity in Tire Regenerates

N. V. Shadrinov and K. P. Antoev p. 1340 abstract

Features of Spark Erosion Fine Powders of Mo and Nb Alloys

N. V. Shchipalkina, S. V. Pshenov, V. A. Chursin, D. S. Sadilo and E. G. Kolesnikov p. 1348 abstract

Potentiodynamic Study of BLa Lead Babbitt (PbSb15Sn10) with Lanthanum in NaCl-Based Electrolyte Medium

M. S. Zarifova, I. N. Ganiyev, Kh. I. Kholov, S. K. Sharipov and F. K. Khodzhayev p. 1356 abstract

New Technologies for Obtaining and Processing Materials

Investigation of the Effect of LiCl and LiF Additives on the Kinetics of Spark Plasma Sintering of Fine-Grained Alumina

M. S. Boldin, A. A. Popov, G. V. Shcherbak, K. E. Smetanina, D. A. Permin, V. A. Koshkin, A. V. Nokhrin, V. N. Chuvil’deev, A. A. Moskvichev and A. A. Murashov p. 1361 abstract

High-Strength Fluoroplastic Composites with Enhanced Resistance to Deformation under Load

P. N. Petrova, M. A. Markova and A. L. Fedorov p. 1371 abstract

Effect of Low-Temperature Plasma on Polyketone Films: Changes in the Chemical Structure and Surface Morphology

M. S. Piskarev, A. V. Zinoviev, A. B. Gilman, E. A. Skryleva, B. R. Senatulin, A. K. Gatin and A. A. Kuznetsov p. 1377 abstract

Dynamic Strength of a Fine-Grained Alumina Ceramic Obtained by Spark Plasma Sintering

N. V. Melekhin, M. S. Boldin, A. A. Popov, A. M. Bragov, A. R. Filippov, S. V. Shotin, A. A. Murashov, A. V. Nokhrin, V. N. Chuvil’deev and N. Yu. Tabachkova p. 1383 abstract

Influence of the Technological Mode of Mixing and Curing System on the Properties of Compositions Based on Nitrile Rubber and Ultrahigh Molecular Weight Polyethylene

N. V. Shadrinov, A. A. Borisova, A. R. Khaldeeva and K. P. Antoev p. 1395 abstract

Influence of the Number of Impregnation Stages on the Macrostructural and Strength Characteristics of Glassy Carbon Foams

D. V. Ponomareva, E. I. Timoshchuk, R. E. Shirokov, E. V. Vasilyeva, I. I. Lyapin and V. Yu. Takhtin p. 1402 abstract

Effect of Mechanical Activation Time on the Structure and Mechanical Properties of W–Cu Powder Composite

E. V. Evstratov, A. S. Baikin and S. I. Averin p. 1408 abstract

The Influence of the Structure of Azo Compounds on the Deposition Process and the Quality of Copper Coatings on Anodized Aluminum Alloys

T. I. Devyatkina, R. V. Taranets, V. V. Rogozhin and V. V. Isaev p. 1414 abstract

Investigation of the Amount of Polyvinylpyrrolidone as Gelling Agent to Lanthanum Cobaltite Micropowders Synthesized by Sol-Gel Method

E. A. Ermakova, S. S. Strelnikova, A. S. Anokhin, A. A. Konovalov, O. S. Antonova and M. S. Chuvikina p. 1422 abstract

Production Technology and Properties of High-Temperature Piezoceramic Materials Based on Phases in the System (1 – y)(Bi_0.8Ba_0.2)Fe_0.8Ti_0.2O₃–y(Ba_0.85Ca_0.15)Ti_0.90Zr_0.10O₃

A. A. Nesterov and M. I. Tolstunov p. 1429 abstract

Synthesis and Catalytic Activity of Highly Dispersed Solid Solutions Ce_0.9Sn_0.1O₂ and Ce_0.8Sn_0.1Zr_0.1O₂ in CO Oxidation

E. A. Simakina, E. Yu. Liberman, B. S. Kleusov, T. V. Kon’kova, V. N. Grunskii, A. N. Morozov and A. V. Denisenko p. 1435 abstract

Electropulse (Spark) Plasma Sintering of Ultrafine-Grained WC–Al₂O₃ Ceramics

E. A. Lantsev, A. V. Nokhrin, M. S. Boldin, K. E. Smetanina, A. A. Murashov, Yu. V. Blagoveshchenskii, N. V. Isaeva, G. V. Shcherbak, V. N. Chuvil’deev, N. Yu. Tabachkova and A. V. Terentyev p. 1441 abstract

Development of Direct Laser Deposition Technology for Large-Scale Products of Nuclear Power Engineering

V. A. Korolev, A. V. Sidorov, I. Yu. Mikhailov, A. A. Matsaev, E. V. Zemlyakov, P. A. Kuznetsov and D. A. Nameev p. 1451 abstract

Results on Testing New Process to Make Nitrogen- and Carbon-Containing Precursor Based on Vanadium and Aluminum to Smelt V–Al–N–C Master Alloy

A. V. Larionov, D. V. Taranov, A. N. Rylov, M. V. Trubachev, S. A. Vohmentsev, M. H. Ziatdinov, I. R. Manashev and K. V. Pikulin p. 1458 abstract

Magnetic Properties of Soft Magnetic Composites Based on Iron Powder with a Multilayer Insulating Coating

G. A. Govor, A. O. Larin, O. F. Demidenko and A. L. Zhaludkevich p. 1465 abstract

Physicochemical Properties and Functional Characteristics of a Tungsten-Free Hard Alloy in the TiC–TiNi System after Ion-Beam Treatment

A. M. Badamshin, S. N. Nesov, S. N. Povoroznyuk, V. V. Akimov, D. A. Polonyankin, A. A. Krutko, E. A. Rogachev, E. V. Knyazev and O. Yu. Burgonova p. 1469 abstract

Influence of 3D Printing Parameters on the Mechanical Properties of Polyethylene Terephthalate Glycol (PET-G) Products

O. Yu. Elagina, A. A. Ushkarev and L. A. Savenkov p. 1476 abstract

Synchrotron Radiation and X-Ray Diffraction Study of Ti–Al–C-Based Coatings

A. A. Maslov, A. Yu. Nazarov, A. A. Nikolaev, E. L. Vardanyan and K. N. Ramazanov p. 1482 abstract

Tribological Properties of Structural Alloy Steels after Laser Surface Modification

S. I. Yaresko, A. T. Kozakov, A. V. Sidashov and V. I. Scherbakov p. 1487 abstract

Methods of Study of Properties of Materials

Porosity of Nickel Nanopowder Compacts Consolidated by Gas Extrusion

M. I. Alymov, A. I. Epishin and F. F. Galiev p. 1497 abstract

Contents