Vol. 17, No. 4, 2026

Inorganic Materials: Applied Research

Effect of Alkali Metals on Anodic Behavior of Aluminum Conductor Alloy AlTi0.1 in Electrolyte Environment of NaCl

I. N. Ganiev, G. M. Rakhmatulloeva, F. Sh. Zokirov, and B. B. Eshov p. 937 abstract

Structuring of Nanocompositions of Inorganic Scintillators and Organic Phosphors for Radiation Detectors

I. S. Tsebruk, N. V. Klassen, V. V. Kedrov, A. D. Orlov, S. A. Vinokurov, and A. P. Pokidov p. 943 abstract

New Nanocompositions from Organic Phosphors and Inorganic Scintillators to Improve Radiation Detectors

I. S. Tsebruk, N. V. Klassen, V. V. Kedrov, A. P. Kiselev, and A. D. Orlov p. 951 abstract

Comparison of the Physical and Mechanical Properties of Cryogels Based on Polyvinyl Alcohol with the Addition of Carbon Nanotubes with DEE-Stabilized Bovine Pericardium

P. S. Onishchenko, K. Yu. Klyshnikov, N. N. Borisova, M. P. Fokeeva, T. V. Glushkova, and E. A. Ovcharenko p. 958 abstract

Features of Hafnium Nitridization in Production of High-Temperature Thermoelectric Converters Based on Bimetallic Pairs Hf–Ti, Hf–Zr, Hf–Nb

I. A. Kovalev, G. P. Kochanov, T. Yu. Kolomiets, A. A. Ashmarin, S. V. Shevtsov, A. V. Shokodko, A. I. Ogarkov, N. A. Ovsyannikov, A. S. Chernyavsky, and K. A. Solntsev p. 969 abstract

Structure and Properties of Composite Filler Materials for the Formation of Antifriction Surface Layers with Increased Wear Resistance

I. E. Kalashnikov, L. I. Kobeleva, R. S. Mikheev, P. A. Bykov, and I. V. Katin p. 976 abstract

Mechanochemical Synthesis and Technological Properties of Erbium Zirconate Powder

Yu. F. Kargin, Zh. V. Eremeeva, G. Kh. Sharipzyanova, and D. S. Ushkalova p. 984 abstract

Some Regularities of Flow of Viscous-Elastic-Plastic Filler in Formed Volume

N. S. Lubimyi, M. D. Gerasimov, A. A. Polshin, M. S. Chepchurov, and B. S. Chetverikov p. 991 abstract

Influence of Synthesis Conditions on the Formation of Mesoporous Hydroxyapatite by a Heterophase Method with Elements of Mechanical Activation

O. S. Antonova, M. A. Goldberg, A. A. Konovalov, A. S. Fomin, A. V. Leonov, A. I. Ogarkov, S. M. Barinov, and V. S. Komlev p. 1000 abstract

Effects of Fillers on the Properties of Vulcanized Rubber Based on Ethylene Propylene Diene Rubber

E. N. Egorov and N. I. Koltsov p. 1008 abstract

The Influence of Modes of Selective Laser Melting on the Features of Formation of Melt Pools and Defect Porosity of Lattice Structures of Medical-Purpose Ti–Zr–Nb Alloy

V. D. Lezin, A. I. Tvorogov, S. V. Chernyshikhin, and V. A. Sheremetyev p. 1013 abstract

Biocompatible Injected Calcium Phosphate Materials for Guided Regeneration in Maxillofacial Surgery

A. Yu. Teterina, I. V. Smirnov, P. V. Smirnova, V. V. Minaichev, R. S. Fadeev, A. A. Egorov, M. A. Shlykov, I. S. Fadeeva, and V. S. Komlev p. 1025 abstract

Effect of CaSnO₃, Concentration and Firing Time on Crystal-Chemical Parameters and Dielectric Properties of Ceramics Based on a Solid Solution of (Ba, Ca)(Ti, Sn)O₃

V. E. Bazarova, A. N. Khrustalev, I. D. Akin’shin, L. A. Arbanas, A. A. Kholodkova, V. I. Kozlov, D. A. Sokolov, and A. V. Smirnov p. 1033 abstract

Influence of Laser Beam Speed Movement on the Strength of Titanium Samples with Composite Ti–TiC Coatings

I. G. Zhevtun, P. S. Gordienko, Yu. N. Kulchin, A. I. Nikitin, A. A. Basakin, D. S. Yatsko, A. V. Golub, and S. B. Yarusova p. 1041 abstract

Simulating the Interaction of Hydrogen with Structural Type CaCu₅ Hydrogen Storage Alloys

S. V. Mitrokhin, E. A. Movlaev, and M. A. Prokhorenkov p. 1049 abstract

Hydroabrasive Resistance in Promising Polyurethane Elastomers

V. Yu. Senichev and E. V. Pogoreltsev p. 1052 abstract

Plasticity and Electrical Resistance of Rapidly Quenched Alloy Co₆₉Fe₄Cr₄Si₁₂B₁₁ at Low Temperatures

P. P. Umnov, T. R. Chueva, N. V. Gamurar, N. D. Bakhteeva, E. V. Todorova, and M. E. Prutskov p. 1056 abstract

Climatic Resistance of Elastomer Composites Based on Ethylene Propylene Diene Rubbers and UHMWPE

A. F. Fedorova, M. L. Davydova, A. R. Khaldeeva, N. V. Shadrinov, M. D. Sokolova, and A. D. Pavlov p. 1062 abstract

Formation of Structure and Phase Composition During Annealing of a Fe–Al Compositional Coating Obtained by High-Speed Metallization

E. V. Astrashab, A. N. Grigorchik, V. A. Kukareko, and M. A. Belotserkovsky p. 1068 abstract

Deformation of Cured Polymer Compositional Materials in the Process of Loading Combined with Microwave Heating

I. V. Zlobina, N. V. Bekrenev, and D. V. Kondratov p. 1076 abstract

Relationship between Functional and Mechanical Properties of Resorcinol-Formaldehyde Aerogels and Resultant Carbon Aerogels

A. A. Kolmakova, V. K. Ivanov, A. E. Baranchikov, S. A. Lermontov, A. N. Malkova, A. D. Filippova, O. S. Ivanova, A. G. Kolmakov, and M. A. Kaplan p. 1085 abstract

Positive Changes in the Structure of High-Speed Steel as a Result of Strengthening Thermocyclic Treatment

A. A. Shmatov p. 1092 abstract

Effect of Silver Content on the Structure and Mechanical Properties of TiZr₃₈Nb₁₁ Alloy

A. D. Gorbenko, V. K. Zhidkov, V. Yu. Zadorozhnyi, Ya. A. Morozova, M. A. Kaplan, S. A. Mikhlik, K. V. Sergienko, A. G. Kolmakov, S. V. Konushkin, T. M. Sevost’yanova, and M. A. Sevost’yanov p. 1102 abstract

Influence of the Portevin-Le Chatelier Effect on the Resistance of Aluminum Alloy AMg6 to Static, Dynamic and Cyclic Loads

V. M. Matyunin, A. Yu. Marchenkov, M. A. Karimbekov, R. Yu. Agafonov, N. O. Tsvetkova, and A. A. Pan’kina p. 1111 abstract

Oxidation Kinetics of Aluminum Alloy AlFe5Si10 with Gallium in the Solid State

I. N. Ganiev, U. Sh. Yakubov, M. Sh. Zhuraeva, I. T. Amonzoda, and N. I. Ganieva p. 1116 abstract

Effect of Mechanoactivation and Type of TPP Fly Ash on the Properties of Geopolymer Binding Composition Ash-Nepheline

E. V. Kalinkina, E. A. Kruglyak, A. G. Ivanova, and A. M. Kalinkin p. 1122 abstract

Mechanical and Optical Characteristics of Modified and Barothermally Treated Ceramic Materials Based on [97Zr3Yb]O₂

L. I. Podzorova, A. G. Padalko, A. A. Ilycheva, N. A. Mikhailina, O. I. Penkova, I. Ya Poyurovskaya, and M. S. Pyrov p. 1130 abstract

A Method to Obtain and Study Morphology and Thermal Stability in PVDF/TiO₂ Composite

A. A. Vodyashkin, N. S. Kudrina, and M. O. Makeev p. 1137 abstract

New Algorithm to Register Defects through Automated Non-Destructive Testing in Products Obtained Using Selective Laser Sintering

A. S. Sergeev p. 1141 abstract

Determination of Adhesive Bond Strength between Carbon Fibers and Epoxy Matrix

R. R. Ivankov p. 1145 abstract

Instrumented Indentation Testing as an Express Method to Monitor Mechanical Properties

A. Yu. Marchenkov, M. P. Petrova, and G. B. Sviridov p. 1153 abstract

Estimating Mechanical Parameters of Structural Materials at High Temperatures Using Instrumented Indentation Testing

G. B. Sviridov, A. A. Pankina, and A. Yu. Marchenkov p. 1156 abstract

Contents

Inorganic Materials: Applied Research