Contents

Inorganic Materials: Applied Research

Vol. 16, No. 4, 2025

Hyperelastic Models Describing Superelastic Alloys

S. A. Muslov, V. N. Khachin, S. D. Arutyunov, S. S. Pertsov, and P. Yu. Sukhochev p. 995  abstract

Investigation of Development Dynamics of Defects Induced by Electric Field in Polysiloxane Sample

A. V. Korzhov, A. V. Prokudin, V. I. Safonov, and A. B. Mamazhonov p. 1002  abstract

Analysis of Methods for Deposition of Barrier Coatings on Carbon Fiber for Metal Matrix Composites

N. A. Litovchenko, E. S. Shitova, A. V. Erokhina, F. V. Makarov, and A. P. Ponomarenko p. 1010  abstract

Effect of Palladium Nanoparticles on Morphology and Thermal Stability of PD@CF2 Catalyst

V. P. Zhereb, S. A. Kuznetsova, Yu. N. Belokon, A. S. Samoylo, E. V. Mazurova, S. M. Yunusov, and E. S. Kalyuzhnaya p. 1017  abstract

Phase Formation in Cr–Si Mixture during Mechanical Activation and Annealing

O. N. Pripisnov, E. V. Shelekhov, S. I. Rupasov, and A. S. Medvedev p. 1022  abstract

Temperature Distribution in Physical Model of Unit Cell of Polymer Composite Material Reinforced with Carbon Fiber, Depending on Absorbed Power of Microwave Electromagnetic Field

N. V. Bekrenev, D. O. Churikov, I. V. Zlobina, and D. V. Kondratov p. 1030  abstract

Features of Compactness and Consolidation of Blanks Made of Mechanically Synthesized Dysprosium Zirconate Powder

Yu. F. Kargin, Zh. V. Eremeeva, G. Kh. Sharipzyanova, and D. A. Ushkalova p. 1038  abstract

High-Strength Titanium Alloys. Prospects for Development

V. V. Shestov, A. A. Arislanov, V. A. Krokhina, and A. A. Shiryaev p. 1044  abstract

Production and Properties of Towpregs Based on Carbon Fibers Impregnated with Polyethersulfone by the Solution Method

A. A. Veveris, and S. D. Kaloshkin p. 1052  abstract

Effect of Manufacturing Method of Mineral Compound on Properties of Ceramic Material of VK94-1 Brand

I. E. Golubeva, M. A. Goldberg, V. V. Smirnov, G. B. Telnova, A. I. Sitnikov, A. A. Konovalov, A. S. Fomin, S. V. Smirnov, D. R. Khayrutdinova, O. S. Antonova, T. O. Obolkina, K. A. Solntsev, and V. S. Komlev p. 1057  abstract

Morphological Features of Microstructure of Samples Based on EP741NP Granulated Alloy Modified with Aluminum Nitride Nanoparticles

D. S. Eliseev p. 1065  abstract

Thermal Expansion of Complex Oxides LaMgAl11O19, PrMgAl11O19, NdMgAl11O19, and SmMgAl11O19

K. S. Gavrichev, V. N. Guskov, P. G. Gagarin, A. V. Guskov, M. A. Ryumin, and Yu. F. Kargin p. 1073  abstract

Tribologial Properties of Lubricating Layer as a Function of the MTMS Aerogel Microparticle Content

A. D. Breki, Yu. A. Karasyov, V. A. Markov, A. A. Kolmakova, V. K. Ivanov, A. G. Kolmakov, S. V. Ganin, E. B. Sedakova, and M. A. Skotnikova p. 1080  abstract

Comparison of Mechanical Properties of Composites on the Basis of Glass Mat Impregnated with Epoxy and Polyester Resins

A. S. Sviridov, R. M. Kasimov, and A. O. Shitov p. 1089  abstract

Formation of Low-Temperature Calcium Phosphates in the Presence of a Directional Magnetic Field

I. V. Smirnov, A. Yu. Teterina, A. Yu. Fedotov, P. V. Smirnova, N. A. Dormidontov, S. M. Barinov, and V. S. Komlev p. 1094  abstract

Influence of Magnetic Field on Structure of Polyvinyl Alcohol Film during Formation from Solution

N. N. Komova, N. A. Sanzharovsky, K. G. Fedotov, and Yu. I. Tarasov p. 1099  abstract

Influence of Heat Treatment on Formation of Microstructure in Samples of Different Cross Sections Obtained from Granulated Alloy EP741NP

D. S. Eliseev p. 1109  abstract

Effect of Electrolytic Plasma Polishing on Surface Morphology and Structure of Plates Made of Promising Biomedical Titanium Alloys

S. A. Mikhlik, S. V. Konushkin, M. A. Volchikhina, M. A. Kaplan, K. V. Sergienko, E. O. Nasakina, M. A. Sudarchikova, A. G. Kolmakov, and M. A. Sevostyanov p. 1116  abstract

Influence of Additive (Mg(OH))2CO3 on Some Fire Hazard Characteristics and Physical and Mechanical Properties of LPPE

T. A. Borukaev, A. Kh. Salamov, A. Kh. Malamatov, and L. R. Pashtova p. 1124  abstract

The Deformational Energy in Hyperelastic Bodies and in Biological Tissues

S. A. Muslov, S. S. Pertsov, and P. Yu. Sukhochev p. 1131  abstract

Investigation of Distribution of Thermal Fields under Discrete Action of Microwave Electromagnetic Field on Extended Objects Made of Cured Carbon-Filled Plastic

I. V. Zlobina, N. V. Bekrenev, D. V. Kondratov, and M. A. Barulina p. 1135  abstract

Variation of α → γ Transformation Temperatures in Steel with Controlled Austenitic Transformation during Operation, Depending on Its Structural–Phase State

A. A. Kruglyakov, S. O. Rogachev, and A. A. Stepashkin p. 1141  abstract

Influence of Hafnium Concentration on Mechanical and Thermomechanical Characteristics of Ni–Ti–Hf System Alloys with High-Temperature Shape Memory Effect

N. N. Popov, D. A. Kaydarov, D. V. Presnyakov, T. A. Morozova, and A. A. Kostyleva p. 1146  abstract

Use of IR Spectroscopy to Assess the Effect of Fine Powders Made of Local Mineral Raw Materials on Structure Formation of Sulfur Binders

T. M. Solovev, and O. N. Burenina p. 1156  abstract

Gel Casting of Parts from VK94-1 Ceramic

I. E. Golubeva, A. I. Sitnikov, and K. A. Solntsev p. 1161  abstract

Effect of Lithium and Tin Additives on Isothermal Mass Transfer in Lead and Lead-Bismuth Melts

E. E. Bobylyov, and E. G. Sokolov p. 1167  abstract

Influence of Polysulfone Modifier on Impact Strength of Epoxy Resin at Low Temperatures

Yu. Yu. Fedorov p. 1173  abstract

Effect of Laser Pulsed Treatment on WC–9% Co Hard Alloy

V. Yu. Zheleznov, T. V. Malinskiy, S. I. Mikolutskiy, V. E. Rogalin, Yu. V. Khomich, I. A. Kaplunov, A. I. Ivanova, and E. E. Ashkinazi p. 1179  abstract

Mechanical Properties of Ti–18Zr–15Nb Alloy Subjected to HPT and Annealing under Different Conditions

D. V. Gunderov, V. A. Sheremetyev, S. D. Gunderova, A. A. Churakova, M. A. Derkach, and A. V. Sharafutdinov p. 1184  abstract

Investigation of Permeability Dependence of Paint-and-Lacquer Coating on Content of Basalt Filler in Composition

Ya. M. Malyavina, A. A. Silaeva, T. R. Romakhina, and N. M. Ryzhov p. 1192  abstract

Evaluation of Thermomechanical Regularities of Moldability of Dispersed-Filled Composites for PIM Technology Based on Results of Uniaxial Pressing

A. N. Muranov, and M. S. Mikhaylov p. 1198  abstract

Study of Forming Technologies in Manufacturing Parts from Electrovacuum Ceramic VK94-1

I. E. Golubeva, A. I. Sitnikov, and A. N. Gordienko p. 1203  abstract

Elevated-Temperature Properties of 1565ch Alloy Base Metal and Welded Joints Made by Friction Stir Welding

A. M. Drits, V. V. Ovchinnikov, and D. A. Polyakov p. 1208  abstract

Analysis of Thermal Barrier Plasma Coatings Based on Zirconium Oxide

V. I. Kalita, D. I. Komlev, and A. A. Radyuk p. 1218  abstract

Higher Density Large-Format Corundum Refractory Materials Obtained through Co-Sintering

A. M. Poskotinova, B. L. Krasnyi, K. I. Ikonnikov, A. L. Galganova, D. I. Vershinin, O. I. Rodimov, D. D. Bernt, and A. S. Sizova p. 1222  abstract

Complex-Shaped Silicon Carbide-Based Materials Molded by Vibrocasting

O. D. Pashkov, V. A. Ovechkina, M. A. Pokrovskiy, and A. L. Yurkov p. 1229  abstract