Contents

Inorganic Materials: Applied Research


Vol. 15, No. 4, 2024


Electrical Conductivity and Electroluminescence of Crystalline Corundum with Cerium Impurity

I. G. Belykh, G. P. Kochanov, and K. A. Solntsev p. 921  abstract

Microwave Heating of Oxidized Iron Powders in Ferromagnetic Resonance Mode

S. V. Stolyar, E. D. Nikolaeva, O. A. Li, D. A. Velikanov, A. M. Vorotynov, V. F. Pyankov, V. P. Ladygina, A. L. Sukhachev, D. A. Balaev, and R. S. Iskhakov p. 927  abstract

Practical Application of Combined Strengthening Treatment Technology for Steel Tools

A. A. Shmatov, L. Soos, and Z. Krajny p. 931  abstract

Plasmochemical Synthesis of Strontium-Aluminosilicate Glass

V. S. Bessmertny, M. A. Bondarenko, N. M. Zdorenko, Yu. T. Platov, R. A. Platova, A. V. Cherkasov, and N. M. Burlakov p. 937  abstract

Kinetic Regularities of Crystallization of Nanocomposites Based on Maleated High-Density Polyethylene and Graphite

Kh. V. Allahverdiyeva, and N. T. Kakhramanov p. 943  abstract

Impact Strength Study of 3D Printed ABS-Plastic Samples Impregnated with Epoxy Resin

Yu. A. Goncharova, V. E. Slavkina, R. Ya. Kazberov, A. S. Sviridov, and S. P. Tuzhilin p. 949  abstract

Features of Powder Synthesis in ZnO–SnO2 System

V. V. Anisimov, N. A. Makarov, and E. K. Zabaluev p. 954  abstract

Influence of Diffusion Alloying of Steel 20 in Medium of Low-Melting Liquid Metal Solutions by Elements of Ni–Cu System on Elemental Composition and Properties of Surface Layers

E. E. Bobylyov, and I. D. Storojenko p. 964  abstract

Effect of Long-Term Operation on Structural-Phase State of Hypereutectoid Rail Steel

N. A. Popova, V. E. Gromov, Yu. F. Ivanov, M. A. Porfiryev, E. L. Nikonenko, and Yu. A. Shlyarova p. 968  abstract

Inorganic Thermofoam Silicate Vitrified Materials Based on Silica-Containing Technogenic Raw Materials

N. K. Manakova, and O. V. Suvorova p. 978  abstract

Chemical Composition Stability of Corundum/Zirconium Dioxide Composites in a Biological Media

L. I. Podzorova, V. A. Volchenkova, A. A. Il’icheva, N. A. Andreeva, A. A. Konovalov, T. N. Penkina, and O. I. Pen’kova p. 983  abstract

Occurrence of Electric Field in Process of Solid-Phase Thermochemical Treatment of Products Made of Iron-Based Alloys

N. A. Shaburova p. 988  abstract

Ferrosilic Glass Samples from Vicinity of Tallinn

B. Z. Belashev, A. V. Modestov, and P. V. Florenskiy p. 995  abstract

Features of Compactibility and Consolidation of Workpieces Made of Mechanosynthesized Dysprosium Molybdenum Powder

G. Kh. Sharipzyanova, and Zh. V. Eremeeva p. 1004  abstract

Formation of Hardened Surface Layer during Laser Cutting of Gears of Tooth Gears Made of Structural Alloy Steel Grade 40Kh

I. V. Minaev, A. E. Gvozdev, A. G. Kolmakov, A. N. Sergeev, S. N. Kutepov, D. S. Klementyev, and I. V. Golyshev p. 1009  abstract

Study of Influence of Finely Dispersed Additives from Local Raw Materials on Strength Properties of Sulfur Concrete

O. N. Burenina, A. V. Andreeva, M. E. Savvinova, and L. A. Nikolaeva p. 1018  abstract

Effect of Glycero-(9,10-trioxolane)-trialeate Ozonide on Structure and Mechanical Properties of Ultrathin Polylactide Fibers Produced by Electrospinning

A. A. Olkhov, O. V. Alekseeva, M. L. Konstantinova, V. V. Podmastaryev, E. E. Mastalygina, Yu. N. Zernova, and A. L. Iordanskii p. 1023  abstract

Influence of Y2O3 and Cr2O3 on Formation of Microstructure and Properties as well as Accuracy of Reproduction of Geometric Characteristics during 3D Printing with Ceramics Based on Al2O3–ZrO2

N. L. Kotelnikov, M. A. Goldberg, T. O. Obolkina, S. V. Smirnov, O. S. Antonova, S. M. Barinov, and V. S. Komlev p. 1031  abstract

Investigation of Elastic Properties of Polyether Ether Ketone by Uniaxial Compression Method

S. Sh. Rekhviashvili, D. S. Gaev, and S. Yu. Khashirova p. 1039  abstract

Temperature Effect of Microwave Heating of Cured Structural Epoxy-Carbon Filled Plastic on Interlayer Shear Stresses

I. V. Zlobina, N. V. Bekrenev, B. B. Morozov, and F. A. Nasonov p. 1043  abstract

Cladding Building Material Based on Mechanically Activated Cullet Modified with Alkalis

V. S. Bessmertny, N. M. Zdorenko, M. A. Bondarenko, P. I. Tokarev, Yu. T. Platov, R. A. Platova, and A. V. Makarov p. 1050  abstract

Identification of Syringe Gland Materials of Import Production and Selection of Their Domestic Analogs

I. G. Tolmacheva, O. S. Yurchenko, L. P. Kochegarova, V. A. Kulikov, O. V. Lysenko, and V. N. Borisov p. 1056  abstract

Production Methods and Biomedical Applications of Materials Based on Poly-3-hydroxybutyrate and Its Compositions

A. A. Olkhov, E. L. Kucherenko, Yu. N. Zernova, V. S. Markin, R. Yu. Kosenko, A. G. Filatova, A. A. Vetcher, and A. L. Iordanskii p. 1064  abstract

Investigation of Electronic and Optical Properties of Thin Films of Copper Oxides Deposited by Low-Pressure Arc Discharge

L. Yu. Fedorov, A. V. Ushakov, and I. V. Karpov p. 1077  abstract

Study of Structure and Phase Composition of Ni + B4C Composite Coatings Produced by Cold Gas-Dynamic Spraying

V. P. Kulevich, V. F. Kosarev, S. V. Klinkov, and V. S. Shikalov p. 1084  abstract

Study of Microstructure, Phase Composition and Oxidation Resistance of High-Entropy Alloys Al0.25CoCrFeNi and Al0.25CoCrFeNiCuAgx (x = 0, 0.1, 0.2)

O. V. Samoilova, I. I. Suleymanova, N. A. Shaburova, and E. A. Trofimov p. 1091  abstract

Acoustic Emission in Zirconium Hydrogenation Process

S. M. Kunavin, A. A. Kuznetsov, M. V. Tsarev, P. G. Berezhko, I. F. Kashafdinov, V. V. Mokrushin, I. A. Tsareva, O. Yu. Zabrodina, and A. E. Kanunov p. 1100  abstract

Effect of Graphene on Microhardness and Tribological Properties of Nanocomposite Ceramics

M. A. Pakhomov, D. O. Moskovskikh, and V. V. Stolyarov p. 1105  abstract

Chondrite from Chelmugi

A. N. Ternovoy, B. Z. Belashev, T. S. Shelekhova, and I. N. Demidov p. 1110  abstract

Features of Formation of Diffusion Layer of Steel VNS32-VI Containing Beryllium under Various Types of Thermochemical Treatment

G. S. Sevalnyov, R. M. Dvoretskov, D. Yu. Nefyodkin, M. A. Gorbovets, A. G. Kolmakov, and A. A. Solntseva p. 1119  abstract

Antifriction Fabric-Based Сarbon-Сarbon Composites

A. G. Shpenev, P. O. Bukovsky, and A. Yu. Krivosheev p. 1126  abstract

Wear Resistance of 08Kh14N5M2DL Steel Grade Having Deposited Kh25N10V8 Alloy Layer at Elevated Temperatures

V. V. Ovchinnikov, and K. V. Malyutin p. 1131  abstract

Effect of Long-Term Exposures at Elevated Temperature on Evolution of 08Kh18N10Т Steel Structure

Zh. E. Chulikova, and V. V. Ovchinnikov p. 1138  abstract

Determination of Thermal Expansion Coefficient in TRIP Steel, Mg–Li Alloy and Si + SiC Coatings

A. A. Ashmarin, S. Ya. Betsofen, A. A. Lozovan, A. S. Lenkovets, M. I. Gordeeva, A. A. Aleksandrov, and E. I. Maksimenko p. 1147  abstract

Effect of Copper Addition on Amorphization of 1CP Alloy in Selective Laser Melting

D. P. Erutin, E. V. Borisov, A. A. Popovich, and V. S. Sufiiarov p. 1153  abstract

Effect of Defects in the Root Part of One-Sided Friction Stir Welding Joints in 1901T Alloy Plates on Mechanical Properties

A. M. Drits, V. V. Ovchinnikov, and R. B. Reztsov p. 1158  abstract

Specificity in Forming Welds in Aluminum Alloy AK 9 Obtained through Selective Laser Fusion

V. V. Ovchinnikov, and R. B. Reztsov p. 1166  abstract

Properties and Structure of 1565ch Alloy in the FSW Zone of Intersection of Welds

A. M. Drits, V. V. Ovchinnikov, and R. B. Reztsov p. 1174  abstract

Effect of Scanning Angle on Density of 1CP/Copper Selective Laser Melted Composite

D. P. Erutin, A. A. Popovich, and V. S. Sufiiarov p. 1181  abstract