Vol. 11, No. 4, 2020
Structure and Mechanical Properties of Bimetal Nb/Cu Rods for Production of Nb3Sn Superconductors
p. 751 abstract
Ionization Processes in Arc Discharge of Low Pressure
p. 757 abstract
Effect of Electric and Magnetic States of Substrate on the Deposition of Organic Polymers
p. 762 abstract
Detection of Magnetic Nanoparticles in Blood Vessels
p. 766 abstract
Effect of Magnetic Ferric Oxide (γ-Fe2O3) Nanoparticles on the Growth of Algal and Yeast Cultures
p. 772 abstract
Ceramics in the Ca2P2O7–Ca(PO3)2 System Obtained by Annealing of the Samples Made from Hardening Mixtures Based on Calcium Citrate Tetrahydrate and Monocalcium Phosphate Monohydrate
p. 777 abstract
Computer-Aided Design of Compounds with Crystal Structure of Melilites
p. 787 abstract
Influence of the Properties of Surface Polyoxide Structures on Wear Processes in Solid Bodies
p. 795 abstract
High-Sensitivity Measurements of the Magnetic Properties of Materials at Cryogenic Temperatures
p. 801 abstract
Magnetic Properties of Bismuth Pyrostannate Doped with 3D Ions
p. 809 abstract
Selecting Laser Cutting Modes for Engineering Steel Sheets Aiming at Provision of the Required Properties of Surface Quality
p. 815 abstract
Tungsten-Free Hard Alloys: An Analytical Review
p. 823 abstract
Effect of Porosity on Some Characteristics of Carbon–Carbon Composite with Coal Tar Pitch and Combined Coal Tar Pitch–Pyrocarbon Matrix
p. 830 abstract
Demagnetization Processes in Multilayered Permalloy-Based Film Structures
p. 838 abstract
Effect of Substrate Condition on the Structural and Tribotechnical Characteristics of Molybdenum Diselenide (MoSe2) Coatings
p. 844 abstract
Magnetic Properties and Giant Magnetic Impedance of Amorphous CoFeNISiB Ribbons in the Form of Micromeanders
p. 849 abstract
Synthesis and Study of Mechanical Properties of Polyelectrolyte Ferrogels Based on Strontium Ferrite Particles
p. 855 abstract
Filter Electrostatic Charging in Fuel Purification
p. 861 abstract
Lubricating Oils Obtained via Modifying Magnetic Nanofluids
p. 865 abstract
Ceramics Based on a Powder Mixture of Calcium Hydroxyapatite, Monocalcium Phosphate Monohydrate, and Sodium Hydrogen Phosphate Homogenized under Mechanical Activation Conditions
p. 879 abstract
Quantitation of Iron(III) Ions Complexed by Tetraphenylporphyrin and Its Effect on the Structure of Ultrafine Poly(3-Hydroxybutyrate) Fibers
p. 886 abstract
Analysis of the Relationship between the Load-Displacement Curve and Characteristics of Fracture of Low-Alloy Steel by Neural Networks
p. 893 abstract
Preparation and Characteristics of Titanium Silicate Filler for Functional Materials
p. 903 abstract
Combustion of a Dust/Gas Mixture Consisting of Particles of Irradiated Nuclear Graphite
p. 908 abstract
Stress Relaxation and Creep of Materials Based on Epoxy Resin with a Filler from Hemp Fibers
p. 915 abstract
Studying Changes in the Structure of Thermally Modified Beech Wood by IR Fourier Spectroscopy
p. 919 abstract
Effect of Heat Treatment on Structure and Microhardness of Ti50Pd40Ni10 Alloy with High-Temperature Shape Memory Effect Studied on Rod-Shaped Blank
p. 925 abstract
Variation of Structure and Hardness of Tool Steel for Hot Pressing upon Heating after Isothermal Holding in the Bainite Range
p. 936 abstract
Destruction of Reinforced Ice Composition Materials upon Bending Mechanical Loading
p. 941 abstract
Damping Composites from Materials with Different Elastic Hysteresis Properties for Sandwich Shock Absorbers of Railroad Transport
p. 947 abstract
Reinforcement of Composites Based on Fresh Ice with Natural Fillers
p. 955 abstract
Analysis of the Technology for Ceramics Fabrication from Silicon Carbide by the Methods of Experimental Design
p. 958 abstract
Method of Determining a Thermomechanical Diagram for Stressed Cylinder Connections upon Their Plane Deformation
p. 965 abstract
Deformation of Explosion-Welded Titanium-Aluminum Composite in Conditions of Transient Rolling Process
p. 972 abstract
Influence of Hydrogen on the Structure of Cerium Films Obtained by Magnetron Sputter Deposition on Semiconductor Wafers
p. 977 abstract
Structure Formation in Nickel-Polytetrafluorethylene Composite Materials upon Explosive Pressing of Powders
p. 982 abstract
Organo-Inorganic Hybrid Gels Based on Nanocomposites of Functionalized Low-Density Polyethylene and Primed Bentonite
p. 991 abstract
Studying Deformation of Ice Composite Materials Using Integrated Fiber-Optic Sensors
p. 996 abstract
Prediction of Properties of Cast Spinelide-Pyroxene Glass-Ceramic Materials through Parameters of Spherulite-Mesh Structure Model
p. 1002 abstract
Silicate Binder from Wastes of Silica Refractory Brick and Building Products on Its Basis
p. 1008 abstract