Vol. 10, No. 4, 2019

Inorganic Materials: Applied Research

Features of Formation of the Structure of Nitrogenous Steel during High Temperature Thermomechanical Treatment

O. V. Fomina, T. V. Vikhareva, Yu. M. Markova and V. B. Gribanova p. 757 abstract

Sensitivity of a Number of Physical Properties to Fixation of the Initial Stages of Aging of Fe–14.5% Mo Alloy

I. B. Kekalo and E. S. Malutina p. 766 abstract

Experimental Study of the Insulator-to-Metal Phase Transition in VO₂ Thin Films in the Microwave Range

D. P. Lelyuk, A. D. Mishin, S. S. Maklakov, A. M. Makarevich and D. I. Sharovarov p. 775 abstract

Study of Interfacial Bonding in Composite Materials Based on NbSi Eutetic Reinforced with Single-Crystal α-Al₂O₃ Fibers with a W Coating

B. V. Shchetanov, I. Yu. Efimochkin, R. M. Dvoretskov and S. V. Paegle p. 781 abstract

Influence of Reinforcing Plant Fillers on the Strength Properties of Composite Materials with an Ice Matrix

V. M. Buznik, G. Yu. Goncharova, G. A. Nuzhnyi, N. D. Razomasov and R. N. Cherepanin p. 786 abstract

The Modification of Polyhydroxy Ether with Carbon Nanoparticles

D. A. Beeva, A. A. Beev and I. M. Dokshokov p. 794 abstract

Porous Ceramics Based on Substituted Tricalcium Phosphates for Bone Tissue Recovery

I. V. Fadeeva, A. S. Fomin, G. A. Davydova, Ya. Yu. Filippov, M. E. Shaposhnikov, V. A. Volchenkova, I. I. Selezneva and S. M. Barinov p. 796 abstract

The Effect of Sulfur and Phosphorus Impurities on the Long-Term Strength of Single Crystals of the ZhS36-VI Alloy under Testing on the Basis of up to 1000 Hours

V. V. Sidorov, D. E. Kablov and P. G. Min p. 802 abstract

Analysis of the Structure of Polyhydroxybutyrate-Based Fibrous Matrices for Prolonged Drug Release

A. A. Ol’khov, E. L. Kucherenko, R. Yu. Kosenko, V. S. Markin, V. I. Perov and A. L. Iordanskii p. 806 abstract

High-Frequency Magnetic Properties of Glass-Reinforced Plastic Laminate with Deposited Functional Thin-Film Coating Based on (Co₄₀Fe₄₀B₂₀)₆₀(SiO₂)₄₀ Nanocomposite

O. S. Tarasova, A. V. Sitnikov, Yu. E. Kalinin, Yu. G. Pasternak, A. D. Mishin, K. N. Rozanov, A. B. Granovskii and V. I. Chuguevskii p. 812 abstract

Mechanical Properties of Titanium Nickelide–Tantalum–Chitosan Composite Material

E. O. Nasakina, M. A. Kaplan, M. A. Sudarchikova, I. M. Fedyuk, S. V. Konushkin, A. S. Baikin, K. V. Sergienko, A. Yu. Teterina, M. A. Sevost’yanov and A. G. Kolmakov p. 818 abstract

Dependence of Microhardness of Glass Composites on the Side of Float Glass Surface

A. B. Atkarskaya, S. Yu. Kabanov and V. G. Shemanin p. 822 abstract

Production of Optically Transparent Shock-Resisting Ceramics by the Methods of Powder Metallurgy (Review)

I. B. Oparina, A. G. Kolmakov, M. A. Sevost’yanov and A. S. Lysenkov p. 825 abstract

Obtaining a Material Based on β-SiC and Carbon Fibers Using an Electric Arc Technique

A. Ya. Pak, A. S. Ivashutenko, A. A. Zakharova and O. A. Bolotnikova p. 836 abstract

Synthesis of the Nanoscale Calcium Hydroxyapatite from Calcium Malate and Ammonium Hydrophosphate

T. V. Safronova, V. I. Putlyaev, A. V. Knot’ko, T. B. Shatalova and V. Yu. Savinova p. 841 abstract

Low-Cycle Fatigue of VZh175 Superalloy at Symmetric and Asymmetric Deformation

M. A. Gorbovets, I. A. Khodinev, M. S. Belyaev and M. N. Letnikov p. 846 abstract

Study of the Structure and Properties of High-Temperature Shape-Memory Alloys of the Ti–Pd–Ni and Ni–Ti–Hf Systems

N. N. Popov, D. V. Presnyakov, T. A. Morozova and E. N. Grishin p. 853 abstract

Layered Natural Minerals as Carriers of Active Components for Functional Materials

A. I. Nikolaev, L. G. Gerasimova, E. S. Shchukina and M. V. Maslova p. 865 abstract

Elaboration of Chemical Hydrogen Source Based on Hydrides of Magnesium Alloys

I. A. Gvozdkov, V. A. Belyaev, S. N. Potapov, V. N. Verbetskii, S. V. Mitrokhin and A. A. Tepanov p. 870 abstract

Methylcellulose Films Partially Crosslinked by Iron Compounds

I. V. Fadeeva, E. S. Trofimchuk, E. V. Rogatkina, A. S. Fomin, Yu. D. Perfil’ev and S. M. Barinov p. 875 abstract

Computer Database of Russian Arctic Materials

V. M. Buznik and R. N. Cherepanin p. 879 abstract

Microhardness of Multilayer Composites

A. B. Atkarskaya, S. V. Zaitsev, S. Yu. Kabanov and V. G. Shemanin p. 884 abstract

Biocompatibility of Biodegradable Polymer Films Based on Poly(lactic-co-glycolic acid) of Various Molecular Weights

A. S. Baikin, M. A. Sevost’yanov, E. O. Nasakina, K. V. Sergienko, M. A. Kaplan, S. V. Konushkin, A. A. Kolmakova, A. D. Yakubov, N. F. Bunkin, S. V. Gudkov, L. A. Shatova, S. M. Barinov and A. G. Kolmakov p. 887 abstract

New 10KhN3MD + 04Kh20N6G11M2AFB Two-Layer Steel with Full-Strength Base and Cladding Layers

G. Yu. Kalinin, S. N. Petrov, E. A. Ushanova, O. A. Khar’kov, S. Yu. Mushnikova, G. D. Motovilina and Yu. M. Markova p. 892 abstract

Analysis of Aluminum Alloy Powders for Additive Manufacturing Fabricated by Atomization

A. V. Garshev, D. A. Kozlov, P. V. Evdokimov, Ya. Yu. Filippov, N. K. Orlov, V. I. Putlyaev, A. V. Chetvertukhin and A. K. Petrov p. 901 abstract

The Investigation of the Chemical Composition, Structure, and Mechanical Properties of EP648 Alloy at Different Stages of Additive Manufacturing

P. G. Min, V. E. Vadeev, A. M. Rogalev and A. E. Knyazev p. 906 abstract

Polymorphic Single-Layer and Fibrillar Nanostructures of J-Aggregates of a Carbocyanine Dye

V. V. Prokhorov, S. I. Pozin, O. M. Perelygina and E. I. Mal’tsev p. 912 abstract

Gold Nanoparticles in Bimetallic Nanoparticle Systems: Synthesis, Properties, and Application

V. A. Ogarev, O. V. Dement’eva and V. M. Rudoi p. 918 abstract

Investigation of the Pivoting Friction of ShKh15 Steel over R6M5 and 10R6M5-MP Steel with the Use of Mathematical Modeling

A. D. Breki, A. E. Gvozdev, A. G. Kolmakov and N. N. Sergeev p. 927 abstract

Ordering of the Amorphous Phase as One of the Characteristics of Supramolecular Structure of Amorphous-Crystalline Polymer

L. F. Kalistratova and V. A. Egorova p. 933 abstract

The Influence of the Strain Aging on the Mechanical Properties upon Extension in the Metal of X80 Strength Grade Pipes

V. A. Khotinov, O. N. Polukhina, O. V. Selivanova and V. M. Farber p. 939 abstract

Change in the Microstructure of Ni Alloy Disk Workpieces for Gas Turbine Engines Produced by the HIP + Deformation Method

A. A. Shestakova, M. N. Letnikov, M. M. Bakradze, M. V. Bubnov and A. V. Skugorev p. 945 abstract

Investigation of Microstructure of Weld Joints of BrKh1Tsr Bronze by Electron–Beam Welding

A. L. Goncharov, E. V. Terent’ev and M. A. Portnov p. 951 abstract

Investigation of the Thermomechanical Characteristics of Feedstocks with Different Binder Types

A. N. Muranov, A. B. Semenov, P. S. Marakhovskii, E. Yu. Chutskova and B. I. Semenov p. 959 abstract

Austenite in Nanostructured Maraging Steel

A. A. Sukhikh, T. M. Makhneva and V. B. Dement’ev p. 966 abstract

The Effect of Zirconium on the Formation Processes of Layered Composition Materials of Titanium–Aluminum and Durability of Aluminum Clutch with Titanium

A. I. Kovtunov, Yu. Yu. Khokhlov and S. V. Myamin p. 974 abstract

Thermodynamic and Kinetic Aspects of the Phosphorus Effect on the Stability of the Structure and Properties of Single-Crystal Refractory Nickel Alloys

D. E. Kablov, V. V. Sidorov and Yu. A. Puchkov p. 979 abstract

Analysis of Fractures of Metal Ceramic Hard Alloys of KNT Brand

I. G. Grigorov and Yu. G. Zainulin p. 987 abstract

Influence of Thermal Cycling on Elemental Composition of VO₂ and V_{1 –} _xFe_xO₂

N. A. Semenyuk, Yu. V. Kuznetsova, Vad. I. Surikov, Val. I. Surikov and A. A. Teploukhov p. 995 abstract

The Influence of CuO Dopant Nanoparticles, Prepared via the Arc Plasma Synthesis Method, on the Critical Current of YBa₂Cu₃O_{7 –} _δ Composites

A. V. Ushakov, I. V. Karpov, A. A. Lepeshev, M. I. Petrov, L. Yu. Fedorov, D. M. Gokhfel’d, S. M. Zharkov, G. M. Zeer, V. G. Demin and A. K. Abkaryan p. 999 abstract

Stability of Ceramic-Ceramic Restorations for Orthopedic Dentistry

L. I. Podzorova, I. Yu. Lebedenko, S. V. Anisimova, A. S. Baikin, V. E. Kutuzova, N. A. Mikhailina, R. G. Nazaryan, O. I. Pen’kova and A. A. Fomina p. 1003 abstract

Semiempirical Mathematical Models of the Pivoting Friction of ShKh15 Steel over R6M5 Steel according to the Ball–Plane Scheme with Consideration of Wear

A. D. Breki, A. E. Gvozdev and A. G. Kolmakov p. 1008 abstract

Contents

Inorganic Materials: Applied Research