Contents

Inorganic Materials: Applied Research

Vol. 9, No. 4, 2018

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Inorganic Materials: Applied Research ISSN 2075-1133.

Analysis of the Background Temperature During the Mechanical Alloying of Metal Powders in the Planetary Ball Mill

V. Yu. Zadorozhnyy, E. V. Shelekhov, G. S. Milovzorov, D. V. Strugova and L. Kh. Zinnurova p. 559  abstract

Influence of Antiphase Boundaries on Structural and Energy Characteristics of Alloy Cu3Pt5

M. D. Starostenkov, A. A. Chaplygina and P. A. Chaplygin p. 566  abstract

On the Interaction of the Deformation and Photonic Self-Organizations in Condensed Media: Overview

N. V. Klassen, A. A. Vasin and K. A. Polyanin p. 570  abstract

Blended Portland Cement Based on Thermally Activated Clays and Carbonate Additives

R. Z. Rakhimov, Z. A. Kamalova and E. Yu. Yermilova p. 578  abstract

Thermal and Electrical Conductivity of Copper-Fluoroplast Composites Produced by Explosive Pressing

A. V. Kazurov, N. A. Adamenko and S. P. Pisarev p. 584  abstract

Formation of Glaze Coatings of Clinker Bricks Based on Raw Kaolin and Aluminum-Containing Nanotechnogenic Raw Materials

E. S. Abdrakhimova and V. Z. Abdrakhimov p. 588  abstract

High-Temperature Filter Based on Silicon Carbide for Aggressive Fluids and Gases

S. K. Brantov and D. N. Borisenko p. 595  abstract

Effect of Reaction Sintering Conditions on Properties of Ceramics Based on Alumina Oxynitride

D. V. Prosvirnin, M. D. Larionov, A. G. Kolmakov, A. S. Alikhanyan, V. I. Antipov, A. V. Samokhin, A. S. Lysenkov and D. D. Titov p. 599  abstract

Thixotropy Hysteresis and Structure Formation in Elastomeric Suspensions

V. A. Nelyub, A. S. Borodulin, L. P. Kobets and G. V. Malysheva p. 603  abstract

Grain Structure of Rapidly Solidified Alloy Sn32Bi52Pb16

V. G. Shepelevich p. 609  abstract

Effect of Microstructural Features of Titanium Alloys on Fatigue Properties and Mechanism of Crack Nucleation in Region of Very High Cycle Fatigue

A. D. Nikitin, A. A. Shanyavskii, N. N. Beklemishev, V. V. Porokhov and O. S. Barsegyan p. 612  abstract

Structure and Strength of the ZhS32-VI Heat-Resistant Nickel Alloy Produced by the Method of Selective Laser Alloying on a Single-Crystal Substrate

N. V. Petrushin, A. G. Evgenov, A. V. Zavodov and I. A. Treninkov p. 620  abstract

Formation of Coatings Based on Copper Aluminides on Aluminum Surface by Contact Melting

V. G. Shmorgun, O. V. Slautin and V. P. Kulevich p. 628  abstract

Development of an Efficient Method for Polyphenylene Sulfide Production

M. M. Murzakanova, T. A. Borukaev and A. K. Mikitaev p. 634  abstract

Tribotechnical Properties of Composite Material “Aluminum–Carbon Nanofibers” under Friction on Steels 12Kh1 and ShKh15

A. D. Breki, T. S. Kol’tsova, A. N. Skvortsova, O. V. Tolochko, S. E. Aleksandrov, A. G. Kolmakov, A. A. Lisenkov, A. E. Gvozdev, Yu. A. Fadin and D. A. Provotorov p. 639  abstract

The Microctructure Formation and the Composite Properties Based on Alginate with Antibacterial Activity

A. Yu. Fedotov, O. V. Baranov, I. S. Pereloma, A. A. Egorov, I. V. Smirnov, Yu. V. Zobkov, A. Yu. Teterina and V. S. Komlev p. 644  abstract

Model of the Destruction of Bioresorbable Polymers in Aqueous Media

P. I. Borovikov, E. N. Antonov, A. G. Dunaev, L. I. Krotova, A. P. Sviridov, T. Kh. Fatkhudinov and V. K. Popov p. 649  abstract

High-Cycle Fatigue of Single Crystals of Nickel-Base Superalloy VZhM4

M. S. Belyaev and N. V. Petrushin p. 655  abstract

Formation of Plastic Zones near Spherical Cavity in Hardened Low-Carbon Steels under Conditions of Hydrogen Stress Corrosion

N. N. Sergeev, V. A. Tereshin, A. N. Chukanov, A. G. Kolmakov, A. A. Yakovenko, A. N. Sergeev, I. M. Leont’ev, D. M. Khonelidze and A. E. Gvozdev p. 663  abstract

Relaxation Properties of Thermoplastic Styrene-Butadiene Block Copolymer with Nanodiamond Filler

N. S. Perov p. 670  abstract

Molding Features of Silicon Carbide Products by the Method of Hot Slip Casting

M. G. Frolova, A. V. Leonov, Yu. F. Kargin, A. S. Lysenkov, D. D. Titov, N. V. Petrakova, S. N. Perevislov, A. A. Konovalov, M. A. Sevostyanov and I. S. Melnikova p. 675  abstract

Effect of the Addition of Thermally Activated Heavy Loam to Portland Cement on the Properties of Cement Stone

R. Z. Rakhimov, N. R. Rakhimova, A. R. Gayfullin and V. P. Morozov p. 679  abstract

Calculation of X-ray Density of Amorphous–Crystalline Polymer Taking into Account Degree of Ordering of Amorphous Phase

L. F. Kalistratova, Yu. K. Mashkov and V. A. Egorova p. 687  abstract

Occurrence and Ways of Development of Manufacture of Domestic Hard Alloy Products

V. S. Panov p. 693  abstract

X-ray Diffraction Tests of Near-Surface Layer of Copper Treated by Ball Rolling

E. L. Kolyvanov, N. S. Afonikova and N. P. Kobelev p. 699  abstract

The Formation of Carbide Coatings at the Microarc Thermodiffusion Tungstenizing of Steel

M. S. Stepanov and Yu. M. Dombrovskiy p. 703  abstract

Study of Formation of Welded Joint Produced by Laser Overlap Welding of Aluminum AMg2M Alloy and St3 Steel

A. B. Lyukhter, A. N. Shlegel, D. S. Gusev and S. S. Samarin p. 709  abstract

Antifriction Properties of Plasma-Chemical Coatings Based on SiO2 with MoS2 Nanoparticles under Conditions of Spinning Friction on ShKh15 Steel

A. D. Breki, S. E. Aleksandrov, K. S. Tyurikov, A. G. Kolmakov, A. E. Gvozdev and A. A. Kalinin p. 714  abstract

Polymers and Composites Produced from Epoxy Resins Cured with 3,5-Diethyltoluenediamine: Synthesis and Properties

M. S. Fedoseev, L. F. Derzhavinskaya, V. E. Antipin and R. V. Tsvetkov p. 719  abstract

Powder Mixtures Based on Calcium Hydroxyapatite and Sodium Salts

T. V. Safronova, V. I. Putlyayev, A. V. Knotko, Ya. Yu. Filippov, E. S. Klimashina, A. P. Ryzhov and B. M. Saidzhonov p. 726  abstract

Effect of Heat Shotblast Treatment Exerted on the Contact Fatigue of Carburised Heat-Resistant Steel C0.12Cr2NiWV

S. A. Pakhomova and O. I. Manayev p. 732  abstract

Influence of Physicochemical Characteristics of Tempering Medium and Friction Modes on the Structure and Kinetics of Strengthening and Destruction of Surface Layer of Nickel

V. G. Pinchuk, S. V. Korotkevich and E. A. Kovalyov p. 736  abstract

Strength and Destruction Mechanism of Low-Alloy Steel Subjected to a Combined Deformation Treatment

A. M. Ivanov p. 741  abstract

The Ion-Exchange Properties of Polymeric Zirconium Phosphate and Zirconium Dioxide

G. N. Altshuler, N. V. Malyshenko and A. N. Popova p. 746  abstract

Influence of the Surface Modification on the Mechanical Properties of NiTi (55.8 wt % Ni) Alloy Wire for Medical Purposes

M. A. Kaplan, M. A. Sevost’yanov, E. O. Nasakina, A. S. Baikin, K. V. Sergienko, S. V. Konushkin and A. G. Kolmakov p. 751  abstract

Distribution of Substitutional Alloying Elements and Interstitial Impurities in In Situ Multicomponent Composites Based on the Nb–Si System

N. A. Kuzmina, I. L. Svetlov and F. N. Karachevtsev p. 757  abstract

The Temperature Effect on Mechanical Properties of Carbon Fiber Reinforced Plastics for Aviation Purposes

A. M. Kudrin, K. S. Gabriel’s and O. A. Karaeva p. 763  abstract

Dispersion Interactions as Criterion of Optimization of Cementless Composite Binders

V. E. Danilov, A. M. Ayzenshtadt, M. A. Frolova and A. S. Tutygin p. 767  abstract

Effect of Chemical Composition of Shungite Material on Its Sorption Properties

I. A. Polunina, I. S. Goncharova, K. E. Polunin and A. K. Buryak p. 772  abstract