Contents

Inorganic Materials: Applied Research

Vol. 7, No. 4, 2016

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Inorganic Materials: Applied Research ISSN 2075-1133.

Features of Temperature Dependence of Electrical Conductivity in Multicomponent Organic Spin Glasses

A. M. Petrov, M. Yu. Dolomatov, R. Z. Bakhtizin, O. L. Ryzhikov and I. R. Khayrudinov p. 453  abstract

Interaction Effects of Alkaline and Acid Electrolytes with Intermetallic γ'-Phase on Surface of Nickel Superalloys

M. R. Orlov, O. G. Ospennikova, F. N. Karachevtsev and Ya. Yu. Nikitin p. 458  abstract

Aging Processes in Low-Alloy Bronzes after Equal-Channel Angular Pressing

D. V. Shangina, N. R. Bochvar and S. V. Dobatkin p. 465  abstract

Structure and Properties of Films Based on Blends of Polyamide–Polyhydroxybutyrate

A. A. Olkhov, Yu. N. Pankova, M. A. Goldshtrakh, R. Yu. Kosenko, V. S. Markin, A. A. Ischenko and A. L. Iordanskiy p. 471  abstract

Manufacture of Composites Based on Aluminum and Shungite under High Pressure Conditions

P. A. Vityaz, A. F. Ilyushchenko, A. G. Kolmakov, V. T. Senyut, M. L. Kheyfets and I. N. Chernyak p. 478  abstract

Consolidation and Properties of Some Powder Materials at the Example of PA-ZhGRDZ and PK10M Alloys

V. N. Antsiferov and Yu. I. Rogozin p. 482  abstract

Hydroxyapatite-Based Coatings for Intraosteal Implants

V. I. Kalita, D. I. Komlev, V. S. Komlev, A. Yu. Fedotov and A. A. Radyuk p. 486  abstract

Strengthening of Bone Cements Based on Tribasic Calcium Phosphate by Calcium Carbonate Granules

V. V. Smirnov, O. S. Antonova, M. A. Goldberg, S. V. Smirnov, A. S. Baikin and S. M. Barinov p. 493  abstract

Investigation of Hydrogen Interaction with Magnetic Materials of Nd–Fe–B Type by Calorimetry Method

E. Yu. Anikina, V. N. Verbetskiy, A. G. Savchenko, V. P. Menushenkov and I. V. Shchetinin p. 497  abstract

Phase Composition of Melt-Quenched Carbon Doped Tungsten Silicides

I. B. Gnesin and B. A. Gnesin p. 502  abstract

Metal Nanoparticles and Quantum Dots as Photosensitizers of Solar Cell Batteries

V. A. Ogaryov, V. M. Rudoy and O. V. Dementyeva p. 509  abstract

Synthesis of Aluminum Oxynitride (AlON) and Study of the Properties of Ceramics Based on It

A. S. Lysenkov, I. A. Timoshkin, Yu. F. Kargin, D. D. Titov, A. Yu. Fedotov, A. A. Ashmarin and A. E. Baranchikov p. 517  abstract

Electronic Energy-Band Structures of Covalent Atomic and Partly Ion Wires ANB8 – N

I. A. Bochkov and P. N. Dyachkov p. 520  abstract

Diagnostics of Fracture Mechanisms of Structural Steels by Acoustic Emission

A. G. Penkin, V. F. Terentyev, V. V. Roshchupkin and M. A. Pokrasin p. 525  abstract

Development of SLZhS32 BR Economically Doped Heat-Resistant Alloy with Single-Crystal Structure

A. V. Logunov, Yu. N. Shmotin, S. A. Zavodov, I. A. Leshchenko, D. V. Danilov, I. I. Khryashchev, A. M. Mikhaylov, A. E. Semin and M. A. Mikhaylov p. 531  abstract

Structure and Mechanical Properties of Three-Dimensional Capillary-Porous Titanium Coatings on Intraosteal Implants

V. I. Kalita, D. I. Komlev and A. A. Radyuk p. 536  abstract

Synthesis and Tribotechnical Properties of Composite Coatings with PM–DADPE Polyimide Matrix and Fillers of Tungsten Dichalcogenide Nanoparticles upon Dry Sliding Friction

A. D. Breki, A. L. Didenko, V. V. Kudryavtsev, E. S. Vasilyeva, O. V. Tolochko, A. G. Kolmakov, Yu. A. Fadin, N. N. Sergeyev, A. E. Gvozdev, N. E. Starikov and D. A. Provotorov p. 542  abstract

Design Concept of Multifunctional Layered Composite Materials for Operation in Arctic Regions

D. K. Ryabov, V. V. Shestov, V. M. Buznik and V. V. Antipov p. 547  abstract

Influence of Processing Conditions of Poly(Ethylene Terephthalate)–Poly(Butylene Terephthalate) Blends on the Dimension of Their Structure Formation Space

M. A. Mikitaev, G. V. Kozlov and A. K. Mikitaev p. 554  abstract

Physical and Mechanical Properties of Fe–Cr–V Damping Corrosion-Resistant Alloys

A. I. Skvortsov, M. A. Melchakov and A. A. Karpov p. 559  abstract

Investigation of SLZhS32 BR Economically Doped Heat-Resistant Alloy with Single-Crystal Structure

A. V. Logunov, Yu. N. Shmotin, S. A. Zavodov, I. A. Leshchenko, D. V. Danilov, I. I. Khryashchev, A. M. Mikhaylov, A. E. Semin and M. A. Mikhaylov p. 564  abstract

Corrosion Resistance Improvement of 30XGCN2A Steel by Ion Implantation Using Cathodes Based on Immiscible Components

V. V. Ovchinnikov, Yu. M. Borovin, E. V. Lukyanenko, I. A. Kurbatova and S. V. Yakutina p. 570  abstract

Highly Porous Cellular Materials: A Statistical Model of Geometric Structure

A. A. Makarov p. 576  abstract

Homogenization Conditions and Mechanical Properties of Ingots of Calcium-Doped AV Alloy

M. A. Gureyeva and O. E. Grushko p. 582  abstract

Composite Metal-Ceramic Heterostructure for Membranes of Deep Purification of Hydrogen

V. M. Ievlev, A. A. Maksimenko, A. I. Sitnikov, K. A. Solntsev, A. S. Chernyavskiy and A. I. Dontsov p. 586  abstract

A Radio Absorbing Composite Material Based on Compounded Rubber and Modified Nonwoven Fabric

E. A. Vlasenko, E. S. Bokova and A. V. Dedov p. 590  abstract

Complex Organomineral Additive for Blended Portland Cement

E. Yu. Yermilova, Z. A. Kamalova and R. Z. Rakhimov p. 593  abstract

Analysis of Dispersion Hardening of Nickel-Based Alloys

T. V. Kurikhina p. 598  abstract

Study of Structural Features, Strength Properties, and Heat Resistance of a Dispersion-Hardened Composite Material Based on Nickel Intermetallide

N. P. Burkovskaya, I. Yu. Efimochkin, O. A. Bazyleva, E. Yu. Turenko, N. V. Sevostyanov, F. N. Karachevtsev and S. G. Kolyshev p. 603  abstract

Influence of Manufacturing Conditions of Carbonitriding on Formation of Surface Layers and Protective Properties of Hot-Work Structural Steel

V. I. Ladyanov, O. Yu. Goncharov, P. I. Malenko, A. Yu. Leonov and K. D. Relmasira p. 610  abstract

Analysis of Microplastic Deformation Processes of Surface Layers of Nitrided Structural Steels

S. A. Polyakov, L. I. Kuksenova, V. G. Lapteva and M. S. Alekseyeva p. 618  abstract

Low-Temperature Oxidation of MoSi2–Si3N4 Composites

D. D. Titov, A. S. Lysenkov, Yu. F. Kargin, V. A. Gorshkov, M. A. Goldberg and N. V. Petrakova p. 624  abstract

Investigation of Physicochemical and Biological Properties of Composite Matrices in a Alginate–Calcium Phosphate System Intended for Use in Prototyping Technologies during Replacement of Bone Defects

V. S. Komlev, N. S. Sergeeva, A. Yu. Fedotov, I. K. Sviridova, V. A. Kirsanova, S. A. Akhmedova, A. Yu. Teterina, Yu. V. Zobkov, E. A. Kuvshinova, Ya. D. Shanskiy and S. M. Barinov p. 630  abstract

Ceramics Based on Calcium Phosphate Powder Synthesized from Calcium Saccharate and Ammonium Hydrophosphate

T. V. Safronova, G. K. Kazakova, P. V. Yevdokimov, T. B. Shatalova, A. V. Knotko, A. V. Korotkova and V. I. Putlyayev p. 635  abstract

Errata

Erratum to: “Synthesis of Micron Particles with Fe–Fe4N Core–Shell Structure at Low-Temperature Gaseous Nitriding of Iron Powder in a Stream of Ammonia” [Inorganic Materials: Applied Research 7, 303 (2016)]

A. G. Gnedovets, A. B. Ankudinov, V. A. Zelenskii, E. P. Kovalev, H. Wisniewska-Weinert and M. I. Alymov p. 641  abstract