Contents
Inorganic Materials: Applied Research

Vol. 6, No. 4, 2015

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Inorganic Materials: Applied Research ISSN 2075-1133.

Study of the Initial Stages of Formation of Ni₃Al Phase Formation during Decomposition
of Supersaturated Solution of Nickel Alloy

T. V. Kurikhina p. 279  abstract

Role of Nucleation in the Development of First-Order Phase Transformations

A. E. Gvozdev, N. N. Sergeyev, I. V. Minayev, I. V. Tikhonova, and A. G. Kolmakov p. 283  abstract

The Formation of Structure and Properties of Antifriction Composites via Modification
of Polytetrafluoroethylene with Polydispersive Fillers

Yu. K. Mashkov, O. V. Kropotin, S. V. Shil’ko, V. A. Egorova, and O. V. Chemisenko p. 289  abstract

The Use of Ion-Atomic Deposition in the Fabrication of One-Dimensional Composites

E. O. Nasakina, M. A. Sevostyanov, K. Yu. Dyomin, A. B. Mikhaylova,
M. A. Goldberg, A. G. Kolmakov, and V. T. Zabolotnyy p. 293  abstract

Solid Solutions Based on Laminated Chalcogenides of Bismuth and Lead
in Ternary Reciprocal Pb, Bi||Se, Te System

L. E. Shelimova, V. S. Zemskov, E. S. Avilov, M. A. Kretova,
I. Yu. Nikhezina, and A. B. Mikhailova p. 298  abstract

Multiparametric Optimization of Laser Cutting of Steel Sheets

A. E. Gvozdev, I. V. Golyshev, I. V. Minayev, A. N. Sergeyev, N. N. Sergeyev,
I. V. Tikhonova, D. M. Khonelidze, and A. G. Kolmakov p. 305  abstract

Oriented Crystallization of Thick Pd–Ru Films during Magnetron Sputtering of Target

V. M. Ievlev, A. A. Maksimenko, E. K. Belonogov, S. V. Kannykin, B. V. Sladkopevtsev,
G. S. Burkhanov, N. R. Roshan, and E. M. Chistov p. 311  abstract

3D Printing of Ceramic Scaffolds for Engineering of Bone Tissue

S. M. Barinov, I. V. Vakhrushev, V. S. Komlev, A. V. Mironov, V. K. Popov,
A. Yu. Teterina, A. Yu. Fedotov, and K. N. Yarygin p. 316  abstract

Improvement of Mathematical Approach to Estimate Integral Heat of Formation
of Iron-Based Solid Solutions

V. P. Filippova, A. A. Tomchuk, and V. V. Rusanenko p. 323  abstract

Simulation of the Influence of Test Factors on the Corrosion of Metal Materials Tested
for the Aggressive Influence of Components of the Industrial Atmosphere
in a Salt Spray Chamber

A. E. Kutyrev, M. A. Fomina, and D. V. Chesnokov p. 327  abstract

Peculiarities of Resilient Highly Elastic Deformation of Organic Glasses
with Linear and Rarely Cross-linked Structure

N. O. Yakovlev, I. V. Mekalina, and E. G. Sentyurin p. 336  abstract

On Problem of Increasing the Structural Strength of Maraging Steels

V. B. Dementyev, A. A. Sukhikh, and T. M. Makhneva p. 343  abstract

The Features of Structure Formation of TiNi Sintered Intermetallic Compound

G. V. Markova, A. V. Kasimtsev, A. V. Shuytsev, and T. A. Sviridova p. 350 abstract

Kinetics of Microstructure and Selective Mechanism of Fracture
of Metal Surface Layer under Friction

V. G. Pinchuk, I. A. Buyanovskiy, and S. V. Korotkevich p. 355  abstract

Relaxation Properties of Model Polymer Systems with Nanosized Filler

N. S. Perov p. 363  abstract

Microstructure of Ni/Ni₃Al–NbC and Nb–Nb₅Si₃ Eutectic Composites

I. L. Svetlov, N. A. Kuzmina, and A. V. Neyman p. 368  abstract

Conductive Inks for Inkjet Printing Based on Composition
of Nanoparticles and Organic Silver Salt

A. I. Titkov, O. G. Bukhanets, R. M. Gadirov,
Yu. M. Yukhin, and N. Z. Lyakhov p. 375  abstract

Induction Boriding of Steels

V. G. Shchukin and V. V. Marusin p. 382  abstract

Nanocrystalline Structure in Fe–Ni Solid Alloys Prepared via Thermal Cycling

E. I. Estrin, D. L. D’yakonov, M. A. Libman, M. E. Podurets,
A. A. Tomchuk, and A. O. Cheretaeva p. 388  abstract

Stability of a Cadmium Mercury Telluride Single-Crystal Structure during Thermal Conductivity
Measurements by the Laser Flash Technique

O. M. Kugaenko, B. R. Senatulin, I. M. Karnaukh, V. S. Petrakov, K. A. Shcherbakov,
V. G. Sredin, M. V. Sakharov, I. I. Astrauskas, Yu. V. Vasil’eva, and K. R. Kurbanov p. 391  abstract

Wear Resistance of Steels under Conditions of Sliding Friction
and High-Density Electric Current Passage

M. I. Aleutdinova, V. V. Fadin, and O. A. Kulikova p. 398  abstract

Constructing the Pair Interaction Potentials of Iron Atoms with Other Metals

V. P. Filippova, E. N. Blinova, and N. A. Shurygina p. 402  abstract

Microhardness of Glass Composites with Single-Component Sol-Gel Coatings

A. B. Atkarskaya, V. M. Nartsev, and E. I. Evtushenko p. 407  abstract

X-ray Diffraction Analysis of Structure of Composite Materials
Based on Polytetrafluoroethylene during Thermal Exposure

V. K. Volkova and L. F. Kalistratova p. 411 abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.