Contents
Inorganic Materials: Applied Research

Vol. 5, No. 4, 2014

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Inorganic Materials: Applied Research ISSN 2075-1133.

Nanostructured Low-Carbon Lath Martensite—Base for High
Structural Strength of Steels

L. M. Kleyner, D. M. Larinin, and A. A. Shatsov p. 289  abstract

Scattering of Values of Impact Toughness of Low-Alloy Steel in the Ductile–Brittle
Transition Temperature Region

M. M. Kantor and V. A. Bozhenov p. 293  abstract

Structure and Properties of Pd–Ru Membrane Alloy Foil Produced
in the Process of Magnetron Sputtering

V. M. Ievlev, G. S. Burkhanov, A. A. Maksimenko, E. K. Belonogov,
A. I. Dontsov, S. V. Kannykin, and N. R. Roshan p. 303  abstract

Peculiarities of Structure and Properties of Metal Surfaces Subjected
to Strain Polishing

N. V. Klassen, N. P. Kobelev, E. L. Kolyvanov, V. I. Orlov, I. M. Shmytko,
V. V. Klubovich, and M. M. Kulak p. 307  abstract

Features of Structure and Properties of Biopolymer Composites
with Inorganic Nanoparticles

A. V. Ryzhenkov, N. V. Klassen, and V. M. Masalov p. 312  abstract

Three-Dimensional Printing of Osteoconductive Ceramic Matrices
for Tissue Engineering

S. M. Barinov, I. V. Vakhrushev, A. A. Egorov, V. S. Komlev,
V. N. Kortunov, L. I. Krotova, V. K. Popov, A. Yu. Fedotov, and K. N. Yarygin p. 318  abstract

Influence of Additives of Aluminum, Magnesium and Calcium on Synthesis
and Sintering of Lanthanum Chromite

A. S. Anokhin, E. S. Chernova, S. S. Strelnikova, N. T. Andrianov,
A. A. Ashmarin, and M. V. Zheleznyi p. 323  abstract

Chitosan-Based Films with Medicines

A. Yu. Fedotov, M. A. Sevost’yanov, K. V. Sergienko, A. Yu. Teterina,
F. M. Tsvang, A. A. Egorov, V. S. Komlev, A. G. Kolmakov, and S. M. Barinov p. 330  abstract

Structure and Properties of Chromium-Molybdenum Steel Modified
by the Addition of Fullerenes and Carbon Nanotubes

L. M. Kaputkina, I. V. Shchetinin, Yu. D. Yagodkin^†, A. G. Savchenko,
M. V. Gorshenkov, and A. V. Glebov p. 334  abstract

Use of Phase Transition to Obtain Gradient Materials

M. P. Galkin, M. A. Libman, and E. I. Estrin p. 340  abstract

Mechanical Properties of Nanostructured Nitinol/Chitosan Composite Material

M. A. Sevost’yanov, A. Yu. Fedotov, A. G. Kolmakov, V. T. Zabolotnyi,
S. M. Barinov, B. A. Goncharenko, V. S. Komlev, A. S. Baikin,
K. V. Sergienko, A. Yu. Teterina, E. O. Nasakina, Yu. O. Leonova, and A. V. Leonov p. 344  abstract

Deformable Bone Cements in System Calcium Phosphates–Chitosan

A. Yu. Fedotov, V. S. Komlev, A. Yu. Teterina, S. M. Barinov, and I. V. Fadeeva p.347  abstract

Interaction of Electromagnetic Radiation and Adsorption-Mobile Particles
of Metal Ferrites in Film Composite Materials

I. V. Trunina, G. A. Frolov, and V. V. Korovushkin p. 352  abstract

Structure and Physical and Mechanical Properties of Heat-Resistant
Austenitic Steel Implanted with Nitrogen Ions

V. A. Kukareko, A. V. Byeli, and I. I. Taran p. 357  abstract

Influence of High-Strength Nanostructural States on Properties
of Multifunctional Metallic Materials Based on Iron

V. V. Rusanenko, E. N. Blinova, V. P. Filippova,
S. Yu. Makushev, and O. P. Zhukov p. 364  abstract

Structure and Conductivity of Nanocomposites Formed on Evaporation
of Drops of Silver Nanoparticle Dispersion

V. V. Vysotskii, O. Ya. Uryupina, M. V. Shamurina,
T. M. Shuman, and I. N. Senchikhin p. 372  abstract

Temperature Dependence of the Fracture Strength of Composite Corundum
Materials Reinforced with Ni and NiAl Particles

V. Yu. Evdokimov, Yu. B. Tyut’kova, A. A. Egorov, N. A. Ovsyannikov,
S. V. Gnidash, V. V. Smirnov, A. Yu. Fedotov, M. A. Sevost’yanov,
S. M. Barinov, and A. S. Lysenkov p. 382  abstract

Strength and Thermophysical Properties of Composite Polymer
Materials Filled with Discrete Carbon Fiber

D. I. Chukov, A. A. Stepashkin, V. V. Tcherdyntsev,
S. D. Kaloshkin, and V. D. Danilov p. 386  abstract

Effect of Annealing and High-Temperature Heatings during Soldering
on Structure and Mechanical Properties of Alloy Based on Nickel Aluminide

O. A. Bazyleva, Yu. A. Bondarenko, O. B. Timofeeva, and A. N. Afanas’ev-Khodykin p. 392  abstract

Properties of Polystyrene-Based Scintillator with Gadolinium Phenylbutanate

A. I. Bedrik, E. S. Velmozhnaya, P. N. Zhmurin, V. N. Lebedev, and V. D. Titskaya p. 399  abstract

Impregnation Kinetics of Fibers with Liquids: Simulation
within the Generalization of Navier–Stokes Equations

P. A. Belov, L. P. Kobets, and A. S. Borodulin p. 403  abstract

Thermophysical Properties of Ceramic Materials of Molds and Cores
for Casting the Heat-Resistant Alloy-Based Blades of Gas-Turbine Engines

Yu. V. Loshchinin, Yu. I. Folomeikin, T. P. Rykova,
P. S. Marakhovsky, and S. I. Pakhomkin p. 407  abstract

Role of DC Electric and Magnetic Fields in the Formation
of a Single-Crystal Silicon Surface Layer

A. V. Brodovoi and S. G. Bunchuk p. 413  abstract

Forming the Surface Layer of Structural Steel with High Tribotechnical
and Strength Properties by Laser Processing

E. I. Tesker, S. E. Tesker, and V. A. Gur’ev p. 416  abstract

Influence of Matrix Replacement on Consolidation Processes
of Composite Ceramic Materials of ZrO₂–Al₂O₃ System

S. E. Porozova and V. B. Kulmetyeva p.420  abstract

Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.