Vol. 15, No. 3, 2024

Inorganic Materials: Applied Research

Effects of Energy Fluxes on Materials

Study of the Microstructure and Phase Composition of Ceramics Based on Silicon Carbide Irradiated with Low-Energy Helium Ions

V. V. Uglov, V. M. Kholad, P. S. Grinchuk, I. A. Ivanov, A. L. Kozlovsky and M. V. Zdorovets p. 591 abstract

Damage to the Surface Layer of Inconel 718 Alloy by Pulsed Beam-Plasma Flows

I. V. Borovitskaya, A. S. Demin, O. A. Komolova, S. V. Latyshev, S. A. Maslyaev, I. S. Monakhov, E. V. Morozov, V. N. Pimenov, I. P. Sasinovskaya, G. G. Bondarenko, A. I. Gaydar and I. A. Logachev p. 596 abstract

Features and Efficiency of Nanosecond Laser Ablation in High-Carbon Steel Caused by Yb:YAG Laser Pulsed Scanning Beam

S. B. Mikhailov, S. G. Gorny and A. N. Sharikov p. 606 abstract

Changes in the Composition and Corrosion-Electrochemical Properties of the Chromium-Nickel Steel 03Cr18Ni11 During Implantation of Argon, Oxygen, and Nitrogen Ions

S. G. Bystrov, S. M. Reshetnikov, A. A. Kolotov and V. Ya. Bayankin p. 617 abstract

Thermal Stability of the Structural and Phase State of Aluminum and Alloys of the Al–Si System Doped with Zirconium Atoms under the Influence of Compression Plasma Flows

N. N. Cherenda, N. V. Bibik, V. M. Astashynski and A. M. Kuzmitski p. 626 abstract

Electrochemical Properties and Structure of the TiNi Alloy Surface Layers Implanted with Titanium and Niobium Ions

V. O. Semin, A. P. Chernova, A. V. Erkovich, M. G. Ostapenko, F. A. D’yachenko, K. P. Savkin, E. D. Khabibova and L. L. Meisner p. 636 abstract

Irradiation of Monocrystalline Silicon with a High-Power Pulsed Beam of Carbon Ions and Protons

S. V. Simakov, N.A. Vinogradova, O. N. Nikitushkina, S. B. Rumyantseva, A. B. Mikhailova, V. I. Tovtin, E. E. Starostin, M. V. Zhidkov, A. E. Ligachev, G. V. Potemkin, G. E. Remnev and S. K. Pavlov p. 649 abstract

Plasmochemical Methods of Production and Treatment of Materials

Effect of the Temperature-Rate Regimes in Electric Pulse Plasma Sintering on Microstructure and Mechanical Properties of Aluminum Oxide: The Role of Sintering Mechanisms

M. S. Boldin, A. A. Popov, A. V. Nokhrin, V. N. Chuvil’deev, A. A. Murashov, G. V. Shcherbak and N. Yu. Tabachkova p. 654 abstract

Oxidation of Zirconium Alloyed with Chromium Atoms by Means of Impact of Compression Plasma Flows

V. I. Shymanski, V. V. Sheveleva, V. V. Uglov, V. M. Astashynski and A. M. Kuzmitski p. 675 abstract

Properties of a High-Power Ion Beam with Particle Energy up to 1 MeV Obtained from a Plasma Created by a High-Voltage Pulse on a Graphite Cathode

G. V. Potemkin, A. E. Ligachev and M. V. Zhidkov p. 686 abstract

Study of the Phase Composition and Microstructure of Complex Carbide (Ti, W)C Obtained by Spark Plasma Sintering of WC and TiC Powders

A. V. Terent’ev, Yu. V. Blagoveshchenskij, N. V. Isaeva, E.A. Lancev, K. E. Smetanina, A. A. Murashov, A. V. Nokhrin, M. S. Boldin, V. N. Chuvil’deev and G. V. Shcherbak p. 696 abstract

Surface Functionalization of Quasi-Two-Dimensional MoS₂ in Nitrogen and Oxygen Plasma

D. E. Melezhenko, D. V. Lopaev, Yu. A. Mankelevich, S. A. Khlebnikov, A. A. Solovykh, L. S. Novikov and E. N. Voronina p. 707 abstract

The Study of the Content of Oxygen and Nitrogen in Plasma Coatings

V. I. Kalita, D. I. Komlev, A. A. Radyuk, B. A. Rumyantsev and V. I. Mamonov p. 716 abstract

The Influence of Hot Isostatic Pressing on the Phase Composition and Porosity of Plasma-Sprayed Ceramics of Pure Alumina

I. V. Belyaev, A. V. Kireev, V. E. Bazhenov, M. N. Gerke, D. A. Kochuev and A. A. Pavlov p. 723 abstract

Functional Coatings and Surface Treatment

Tribological Characteristics of Ti–Al– N, Ti–Al– Ni–N, Ti–Cr–Ni–N, and Ti–Cr–Ni–Mo–N Strengthening Coatings on Steel 20Kh13 in a Friction Pair with Carbon Fiber and Their Corrosion Resistance

V. S. Sergevnin, D. S. Belov, A. V. Chernogor, I. V. Blinkov, A. P. Demirov and A. V. Anisimov p. 728 abstract

Structure and Properties of Bioinert Mo–Nb Coating Formed on Titanium Grade 5 Medical Alloy by Electroexplosive Method

D. A. Romanov, K. V. Sosnin, S. Yu. Pronin, V. V. Pochetukha, Yu. F. Ivanov and V. E. Gromov p. 737 abstract

Durability of Cutting Tools with Deposited Ceramic-Metal Coatings (Ti, Al)N–Cu and (Ti, Al)N–Ni during Turning and Milling of Steels

D. S. Belov, D. N. Klauch, I. V. Blinkov, A. I. Laptev and A. P. Demirov p. 752 abstract

FeZrN Films: Static and Microwave Magnetic Properties

E. N. Sheftel, E. V. Harin, V. A. Tedzhetov, K. N. Rozanov, S. Yu. Bobrovskii and G. Sh. Usmanova p. 760 abstract

Composite Materials

Structural Modification of Fine Powders of Overburden Rocks of Saponite-Containing Bentonite Clay

A. M. Ayzenshtadt, E. V. Korolev, M. A. Malygina, T. A. Drozdyuk and M. A. Frolova p. 766 abstract

Mechanical Properties of Composite Rods Produced by Hot Gas Extrusion of the Nickel and Aluminum Powder Mixtures in a Steel Shell

F. F. Galiev, I. V. Saikov, V. D. Berbentsev, A. E. Sytschev, G. R. Nigmatullina and M. I. Alymov p. 772 abstract

W–C–Co Composite Nanopowder Treatment in Microwave Electromagnetic Field

A. V. Samokhin, N. V. Alekseev, M. A. Sinayskiy, A. G. Astashov, A. V. Vodopyanov, A. A. Sorokin and S. V. Sintsov p. 779 abstract

Influence of Aluminum Hydroxide Concentration in a Liquid Photocuring Resin on the Properties of Cured Specimens

S. A. Cherebylo, V. V. Vnuk, E. V. Ippolitov, S. V. Kamaev, M. A. Markov, A. N. Nikitin and M. M. Novikov p. 789 abstract

New Methods of Treatment and Production of Materials with Required Properties

Properties of Coatings Based on Cerium Dioxide Obtained by Magnetron Sputtering

A. S. Baikin, E. O. Nasakina, A. G. Kolmakov, K. V. Sergienko, M. A. Sudarchikova and M. A. Sevostyanov p. 796 abstract

Mechanism of Nanoparticle Formation under Reduction of Oxygen-Containing Cobalt(II) Compounds with Hydrogen

E. L. Dzidziguri, E. N. Sidorova and E. V. Zaharova p. 803 abstract

The Mechanism of Swelling of Irradiated Oxide Nuclear Fuel: Part I. Normal Operating Condition

Yu. N. Devyatko, V. V. Novikov and O. V. Khomyakov p. 811 abstract

The Mechanism of Swelling of Irradiated Oxide Nuclear Fuel: Part II. Swelling during Power Ramps

Yu. N. Devyatko, V. V. Novikov and O. V. Khomyakov p. 823 abstract

Interaction of Praseodymium and Dysprosium with Oxygen in Nickel Melts at P_Ar = 0.1 MPa and Analysis of Nonmetallic Inclusions

V. T. Burtsev, E. B. Chabina and S. N. Anuchkin p. 831 abstract

The Preparation of Iron-Based Scaffolds with an Antibacterial Coating Based on Polylactic Acid and Vancomycin

A. S. Lozhkomoev, S. O. Kazantsev, O. V. Bakina, A. S. Buyakov, E. I. Senkina, M. G. Krinitcyn, V. A. Ivanyuk, A. F. Sharipova and M. I. Lerner p. 842 abstract

Structure of Alloys for (Sm, Zr)(Co, Cu, Fe)_z Permanent Magnets and Formation Mechanism of High-Coercivity State

A. G. Dormidontov, N. B. Kolchugina, N. A. Dormidontov, P. A. Prokofev, M. V. Zheleznyi, Yu. V. Milov, A. S. Andreenko, I. A. Sipin, A. S. Bakulina and A. A. Telitsa p. 851 abstract

Effect of the Melt Cooling Rate on the Structural-Phase State of the Al–Si Alloy Doped with Metals

V. G. Shepelevich, O. V. Gusakova and S. V. Husakova p. 866 abstract

Kinetics of Annealing of Deformation Defects in the Model Alloy Zr–Sn–Fe–Cr

E. P. Belan, A. V. Obukhov, S. G. Eremin, D. M. Sorbat, D. V. Kharkov, D. E. Markelov and I. I. Gibadullin p. 872 abstract

Melting of Quartz–Leucoxene Concentrate with Dispersed Arc Heating

A. A. Nikolaev, D. E. Kirpichov, S. M. Muromskiy, A. V. Nikolaev, O. A. Ovchinnikova and T. N. Penkina p. 877 abstract

Properties of Nanocrystalline Magnetic Powders of the Fe–O system Obtained from Iron Ore Dust Using Magnetic Pulse Processing

A. S. Lileev, Yu. V. Konyukhov, D. G. Zhukov, R. Khanna and P. S. Mukherjee p. 883 abstract

P–T–x Phase Diagram of Al–Ba System

M. I. Alymov, Yu. V. Levinsky and E. V. Vershinina p. 889 abstract

Vapor Composition and Thermodynamic Characteristics of Gaseous Molecules of Alkaline Earth Metal Tungstates

E. K. Kazenas, N. A. Andreeva, G. K. Astakhova, V. A. Volchenkova, O. A. Ovchinnikova, T. N. Penkina and O. N. Fomina p. 893 abstract

Repeatability of Electron Beam Welding Deposition Parameters under Supply of Filler Wire to Implement Additive Technologies

D. A. Gaponova, A. C. Shcherbakov, A. Y. Chursin and E. S. Ryazanova p. 899 abstract

Secondary Micro- and Nanostructures on the Surface of Microwave Carbonized Cotton Fibers