Vol. 13, No. 3, 2022

Inorganic Materials: Applied Research

Effects of Energy Fluxes on Materials

Simulation of Crystallization of a Melt Modified by Nanoparticles during Laser Treatment of a Metal Surface

V. N. Popov p. 599 abstract

Properties of the Surface of Structural Materials in the Area of a Barcode Formed under the Action of Laser Radiation

Yu. R. Kolobov and A. E. Ligachev p. 607 abstract

Thermochemical Processes Occurring in a Titanium Nitride Coating under the Effect of Thermal Laser Pulses

P. Yu. Kikin, V. N. Perevezentsev, E. N. Razov and E. E. Rusin p. 614 abstract

Laser Shock Processing of AMg6 Alloy without Coating

I. A. Bakulin, S. I. Kuznetsov, A. S. Panin and E. Yu. Tarasova p. 619 abstract

Material Modification by Powerful Pulsed Ion Beams

G. E. Remnev, V. A. Tarbokov and S. K. Pavlov p. 626 abstract

Formation of Bulk Samples from the Ti₃AlC₂ MAX-Phase Powder by Selective Laser Sintering

M. G. Krinitcyn, I. A. Firsina, A. V. Baranovskiy and M. P. Ragulina p. 641 abstract

The Efficiency of Ablation of Metals by Scanning Beam of Pulsed Irradiation with Nanosecond-Range Fiber Yb:YAG Laser

S. B. Mikhailov, S. G. Gorny and N. V. Zhukov p. 646 abstract

Noncoherent Diffusion of a Vacancy in a One-Dimensional Lattice in the Quasiclassical Approximation

Yu. A. Kashlev and S. A. Maslyaev p. 661 abstract

Effect of Implantation of Argon and Oxygen Ions on the Physicochemical Properties and Corrosion and Electrochemical Behavior of 14Cr17Ni2 Chromium–Nickel Steel

S. G. Bystrov, S. M. Reshetnikov, E. M. Borisova, I. N. Klimova, A. A. Kolotov, A. V. Zhikharev and V. Ya. Bayankin p. 666 abstract

Applying CO₂ and Ytterbium Fiber Lasers to High-Performance Production of Refractory Oxide Nanopowders

V. V. Osipov, V. V. Platonov, V. V. Lisenkov and E. V. Tikhonov p. 674 abstract

Damage of Niobium by Pulsed Flows of Helium Ions and Helium Plasma

V. N. Pimenov, I. V. Borovitskaya, A. S. Demin, N. A. Epifanov, S. V. Latyshev, S. A. Maslyaev, E. V. Morozov, I. P. Sasinovskaya, G. G. Bondarenko and A. I. Gaidar p. 687 abstract

Photo- and Mechanoluminescent Properties of SrAl₂O₄:(Eu²⁺, Dy³⁺) Phosphor and Its Use for Visualization of Deformation Dynamics of Materials

A. F. Banishev p. 696 abstract

Plasmochemical Methods of Production and Treatment of Materials

Modification of the Structure of the Hypereutectic Silumin Alloy Al-44Si under the Action of Compression Plasma Flows

V. I. Shymanski, A. Jevdokimovs, V. V. Uglov, N. N. Cherenda, V. M. Astashynski, A. M. Kuzmitsky, N. V. Bibik and E. A. Petrikova p. 701 abstract

Development and Research of Plasma-Chemical Technology for Producing Mixed Uranium and Plutonium Oxides from Solutions

N. V. Dedov, A. N. Zhiganov, V. L. Sofronov, Yu. N. Tumanov and M. S. Fedorov p. 710 abstract

Separation of Titanium and Silicon Oxides during Plasma-Arc Melting of Quartz-Leucoxene Concentrate

A. A. Nikolaev, A. V. Nikolaev and D. E. Kirpichev p. 716 abstract

Functional Coatings and Surface Treatment

Properties of Chromium Coatings Applied by Various Methods to Zirconium Alloy E110

A. A. Yakushkin, V. M. Borisov and V. N. Trofimov p. 721 abstract

Improving the Properties of Plasma Heat-Resistant Coatings by Means of Spraying Materials That React with Exothermic Effects

V. M. Gusev, O. Yu. Elagina and A. G. Buklakov p. 728 abstract

Surface Modification of Titanium VT6 Alloy Obtained by Additive Technologies Using Reactive Electrospark Treatment

S. K. Mukanov, A. E. Kudryashov and M. I. Petrzhik p. 732 abstract

Changes in the Structure of a Thermal Protective Nickel Aluminide Coating under the Influence of a Single Thermal Laser Pulse

O. B. Berdnik, P. Yu. Kikin, V. N. Perevezentsev, E. N. Razov, E. E. Rusin and I. N. Tsareva p. 740 abstract

Operational Properties of Steel Friction Units with Copper-Alloy Antifriction Coating Formed via Electric Spark Alloying

L. I. Kuksenova, D. A. Kozlov and M. S. Alekseeva p. 745 abstract

Identification of Relaxation Maxima of Internal Friction in Zr–Nb Alloy after Nitriding, Oxidation in Air, and In Situ Carburization

V. M. Anan’in, B. A. Kalin, V. V. Novikov and A. V. Sumarokova p. 754 abstract

Study of High-Speed Sintering of Fine-Grained Hard Alloys Based on Tungsten Carbide with Ultralow Cobalt Content: Part I. Pure Tungsten Carbide

E. A. Lantsev, N. V. Malekhonova, V. N. Chuvil’deev, A. V. Nokhrin, Yu. V. Tsvetkov, Yu. V. Blagoveshchenskiy, M. S. Boldin, P. V. Andreev, K. E. Smetanina and N. V. Isaeva p. 761 abstract

Composite Materials

Synthesis and Properties of Silicon Carbide Nanoparticles Obtained by the Laser Pyrolysis of a Mixture of Monosilane and Acetylene

I. A. Ershov, V. I. Pustovoy, V. I. Krasovskii, A. N. Orlov, S. I. Rasmagin, L. D. Iskhakova, F. O. Milovich, M. N. Kirichenko, L. L. Chaikov and E. A. Konstantinova p. 775 abstract

Preparation of Metal-Carbon Nanocomposites from Cu–Fe Alloy Nanoparticles and Carbonized Polyacrylonitrile

A. A. Vasilev, E. L. Dzidziguri, M. N. Efimov, D. G. Muratov and G. P. Karpacheva p. 781 abstract

Formation of Gallium Nanoparticles by Thermal Evaporation Method in an Argon Atmosphere

G. N. Kozhemyakin, Yu. S. Belov, M. K. Trufanova and O. E. Bryl p. 788 abstract

Possible Approach to Estimating the Dispersion Interaction in Powder Systems

A. M. Ayzenshtadt, E. V. Korolev, T. A. Drozdyuk, V. E. Danilov and M. A. Frolova p. 793 abstract

Micro- and Macroporosity of Three-Dimensional Capillary-Porous Composite Coatings

V. N. Sokolov, O. V. Razgulina, M. S. Chernov, V. A. Mamaeva, A. I. Mamaev, V. I. Kalita, D. I. Komlev and A. A. Radyuk p. 800 abstract

Effect of Silicon on the Properties of Sintered Alloys of (Al–Si)–Sn System

N. M. Rusin and A. L. Skorentsev p. 809 abstract

Two-Layer Copper-Based Powder Electrocontact

A. G. Meilakh, Yu. V. Kontsevoy, I. O. Gilev and A. B. Shubin p. 818 abstract

New Methods of Treatment and Production of Materials with Required Properties

Highly Borated Dispersed Aluminum: Experimental Evaluation of Its Neutron-Shielding Properties

V. S. Yusupov, S. I. Tyutyunnikov, V. A. Artyukh, T. L. Enik, V. A. Zelensky, V. N. Shalyapin, R. S. Fakhurtdinov, S. D. Karpukhin, E. A. Frolova and B. F. Belelyubsky p. 823 abstract

Investigation of the Nitride Phase in a Heat-Resistant VZh171 Alloy of the Ni–Co–Cr–W–Ti System, Hardened by Internal Nitriding

S. V. Ovsepyan, Yu. R. Kolobov, M. V. Akhmedzyanov, S. S. Manokhin and E. V. Filonova p. 828 abstract

Activation of Reaction with Participation of a Solid Metal by Electrostatic Charge Energy on the Metal

V. F. Goryushkin, Yu. V. Bendre and N. S. Zaitsev p. 835 abstract

The Influence of Long-Term Annealing Simulating Parameters of Dry Storage of VVER-1000 Fuel Rods on Mechanical Properties of Claddings from E110 Alloy in the Longitudinal Direction

G. P. Kobylyansky, A. O. Mazaev, E. A. Zvir, S. G. Eremin, E. V. Chertopyatov and A. V. Obukhov p. 842 abstract

Мechanochemically Synthesized Nickel-Containing Aluminosilicate Modifiers for Tribotechnical Aluminum Alloys

S. A. Kovaleva, T. F. Grigor’eva, P. A. Vityaz’ and V. I. Zhornik p. 848 abstract

Effect of Antibacterial Drugs on Hydrolytic Degradation of Aliphatic Polyesters

E. N. Antonov, A. G. Dunaev, L. I. Krotova and V. K. Popov p. 854 abstract

Development of Methods for Determination of the Ag, Cu, Fe, and Zn Contents in Materials Based on Calcium Phosphate for Medical Purposes

V. A. Volchenkova, E. K. Kazenas, N. A. Andreeva, T. N. Penkina, S. K. Rodionova, V. B. Smirnova, A. A. Fomina, O. N. Fomina, I. V. Fadeeva, A. S. Fomin and M. A. Goldberg p. 861 abstract

Experimental Study on Tensile Deformation Process of Graphitized High Carbon Steel Sheet

Zhang Yong Jun, Li Xin Peng, Wang Jiu Hua and Han Jing Tao p. 866 abstract

Study of Structural and Morphological Changes during Accelerated Oxidative Degradation of Mixtures of Polyoxybutyrate with Polycaprolactone

V. N. Vasilets, A. P. Pankina, E. A. Nemets, V. Yu. Belov and V. I. Sevastianov p. 872 abstract

Laser Formation and Influence of Laser Radiation on Basic Characteristics of Barcodes

S. G. Gorny, E. A. Zakharenko, N. V. Klassen, Yu. R. Kolobov, A. E. Ligachev, E. I. Pryakhin, V. V. Romanov and G. V. Odintsova p. 879 abstract

Investigation of the Microhardness of the Fiberglass Matrix over the Thickness of the Samples Molded by Various Methods

E. A. Veshkin, V. V. Semenychev, V. I. Postnov and E. V. Krasheninnikova p. 887 abstract