Vol. 11, No. 3, 2020

Inorganic Materials: Applied Research

Effect of Energy Fluxes on Materials

Orientation Effects during Scattering of Ar⁺ Ions from the InP(001) Surface under Grazing-Angle Ion Bombardment

U. O. Kutliev, M. K. Karimov and M. U. Otaboev p. 503 abstract

Effect of Ag²⁺ and C⁺ Ion Implantation on the Surface Physicochemical Properties of Polylactic Acid, Hydroxyapatite, and Their Composites

O. A. Laput, I. V. Vasenina and I. A. Kurzina p. 507 abstract

The Rate of Fast Particles Leaving a Planar Channeled Regime in a Quasiclassical Approach

Yu. A. Kashlev and S. A. Maslyaev p. 514 abstract

Effect of Laser Treatment and Hydrophobization on the Corrosion-Electrochemical Behavior of Aluminum

E. M. Borisova, F. Z. Gilmutdinov, S. M. Reshetnikov, F. F. Chausov, E. V. Kharanzhevsky and T. A. Pisareva p. 520 abstract

Effect of Pulsed Photon Treatment on Electrophysical and Thermophysical Properties of n-Type Solid Solution Based on Bi₂Te₃–Bi₂Se₃: I. Electrophysical Properties

A. A. Grebennikov, A. I. Bocharov, S. B. Kushchev, D. V. Serikov, A. V. Kostyuchenko, E. N. Fedorova, I. V. Izvekova and I. A. Safonov p. 526 abstract

Effect of Pulsed Photon Treatment on Electrophysical and Thermophysical Properties of n-Type Solid Solution Based on Bi₂Te₃–Bi₂Se₃: II. Thermal Conductivity and Thermoelectric Figure of Merit

A. A. Grebennikov, A. I. Bocharov, S. B. Kushchev, D. V. Serikov, A. V. Kostyuchenko, E. N. Fedorova, I. V. Izvekova and I. A. Safonov p. 531 abstract

Peaked Modular Effect under Nanoindentation of Fe–20Cr Alloy

A. B. Tsepelev p. 536 abstract

Diagnostics Using Polarization Spectroscopy Methods of Powerful Fluxes of Fast Particles in a Pinch Plasma Used to Test Fusion Energy Materials

V. A. Gribkov and M. B. Shapochkin p. 541 abstract

The Effect of Pulsed Nanosecond Laser Irradiation on the Corrosion Resistance of Mg–Al–Zn Magnesium Alloy

S. A. Bozhko, S. S. Manokhin, A. Yu. Tokmacheva-Kolobova, Yu. Yu. Karlagina and A. E. Ligachev p. 547 abstract

Plasmochemical Methods of Production and Treatment of Materials

Coefficient of Relative Sensitivity in Mass Spectrometers with Inductively Coupled Plasma

T. K. Nurubeyli p. 552 abstract

Structure and Wear Resistance of the Coatings Plasma Sprayed with “TiC + High Chromium Cast Iron Binder” Composite Powder

G. A. Pribytkov, V. I. Kalita, D. I. Komlev, A. V. Baranovskiy, A. A. Radyuk, M. G. Krinitcyn, A. Yu. Ivannikov, V. V. Korzhova and A. B. Mikhaylova p. 558 abstract

Thermophysical Parameters of the Anode Region of Plasma Arc under the Reduction Smelting of Quartz-Leucoxene Concentrate in a Metal-Graphite Reactor

A. A. Nikolaev, D. E. Kirpichev and A. V. Nikolaev p. 563 abstract

Growth of Allotropic Modifications of Carbon on a Thin Tungsten Wire from Vapor Phase with the Use of Microwave Plasma

S. A. Eremin, V. N. Anikin, D. V. Kuznetsov, I. A. Leontiev, O. Yu. Kudryashov, I. A. Levshukov, A. M. Kolesnikova and Yu. M. Yashnov p. 568 abstract

Development of a Technology for Dissolving a Homogeneous Mixture of Uranium and Plutonium Oxides Obtained by the Plasma-Chemical Method

N. V. Dedov, S. B. Tochilin, Yu. N. Tumanov and A. N. Zhiganov p. 572 abstract

Spheroidization of Fe-Based Powders in Plasma Jet of DC Arc Plasma Torch and Application of These Powders in Selective Laser Melting

A. V. Samokhin, A. A. Fadeev, N. V. Alekseev, M. A. Sinaysky, V. Sh. Sufiyarov, E. V. Borisov, O. V. Korznikov, T. V. Fedina, G. S. Vodovozova and S. V. Baryshkov p. 579 abstract

Kinetics of Spark Plasma Sintering of WC–10% Co Ultrafine-Grained Hard Alloy

E. A. Lantsev, V. N. Chuvil’deev, A. V. Nokhrin, M. S. Boldin, Yu. V. Tsvetkov, Yu. V. Blagoveshchenskiy, N. V. Isaeva, P. V. Andreev and K. E. Smetanina p. 586 abstract

Functional Coatings and Surface Treatment

Modification of the Surface Microtopography of a Bronze Alloy under Irradiation with a Scanning Beam of Nanosecond Laser Radiation Pulses

V. N. Yolkin, T. V. Malinskiy, Yu. V. Khomich and V. A. Yamshchikov p. 598 abstract

Degradation of Spacecraft’s Temperature-Control Coatings during Deposition of Thin Au Films

A. B. Nadiradze, G.V. Panasova, R. R. Rakhmatullin and V. A. Smirnov p. 604 abstract

Formation of Cr_xC_yO_z Coatings under Laser Treatment of Chromium Carbide Ceramics

Ya. S. Fironov, M. V. Vlasova, I. V. Melnikov, M. G. Kakazey, M. C. Reséndiz-González, S. I. Kondrashenko and D. A. Ryabtsev p. 610 abstract

Formation of a Protective Oxide Coating on the Surface of Stainless Steel under Radiation-Oxidative Pretreatment with Gamma Quanta

T. N. Agaev, S. Z. Melikova and M. M. Tagiev p. 619 abstract

Effect of High-Temperature Nitriding on the Corrosion Resistance of Ferrite Chromium Steels

S. O. Rogachev, S. A. Nikulin, V. M. Khatkevich, A. O. Cheretaeva and B. E. Bekkaliev p. 623 abstract

Efficiency of Vanadium Barrier Layer in a Stainless Steel–Titanium Bimetal at a High Temperature

I. V. Saikov, A. A. Berdychenko and V. V. Kurilkin p. 629 abstract

Peculiarities of Formation of Residual Stresses in Welded Joints and Stellite Weld Cladding on Rail Steel

S. Ya. Betsofen, K. V. Grigorovich, A. A. Ashmarin, A. Yu. Abdurashitov and M. A. Lebedev p. 634 abstract

Deposition of Pseudo-Alloy Coatings by Electric Arc Metallization

O. Yu. Elagina, V. M. Gusev, A. G. Buklakov, N. S. Nesterenko and K. O. Tomsky p. 641 abstract

Effect of Intermediate Ion Cleaning of the Titanium Target on the Structure of Bioresorbable PLLA Scaffolds under Coating Deposition by DC Reactive Magnetron Sputtering

P. V. Maryin, N. M. Ivanova, E. V. Shesterikov, E. N. Bolbasov and S. I. Tverdokhlebov p. 646 abstract

Thermodynamic Functions of the Anodic Oxidation Reactions of Niobium and Tantalum

A. S. Kamysheva, A. I. Koroleva and L. P. Mileshko p. 653 abstract

Composite Materials

Effect of Alloying with Co on the Formation and Adhesion Strength of Foam Aluminum–Titanium Composite Material

A. I. Kovtunov, Yu. Yu. Khokhlov and S. V. Myamin p. 659 abstract

Local and Spatial Structure of Nanofiller in Polymer Matrix and Its Influence on the Properties of Nanocomposites

P. G. Rizvanova, G. M. Magomedov, G. V. Kozlov and I. V. Dolbin p. 665 abstract

Lower Limit Size of Pores in Metals under Sintering

M. I. Alymov and S. I. Averin p. 669 abstract

Vibration Cladding of Copper Powder with Aluminum

Yu. V. Kontsevoi and A. G. Meilakh p. 672 abstract

Mechanism of Load and Deformation Transfer among Fibers in Composite Materials

V. V. Kudinov, I. K. Krylov and N. V. Korneeva p. 677 abstract

Peculiarities of Pressure Welding of Pd Foil to Stainless Steel

A. V. Liushinsky, G. S. Burkhanov, N. R. Roshan and E. M. Chistov p. 681 abstract

Correlations between the Characteristics of the Initial and Final Materials of Copper Nanopowder

E. N. Sidorova, A. Yu. Ten, I. A. Iliinykh and E. L. Dzidziguri p. 686 abstract

Regularities of Formation of Lattice Structures Fabricated by Selective Laser Melting of Powdered 03Kh16N15M3 Steel

M. G. Isaenkova, Yu. A. Perlovich, A. V. Yudin, A. E. Rubanov, N. Yu. Zhuravlev, M. D. Saveliev and A. V. Dub p. 692 abstract

New Methods of Treatment and Production of Materials with Required Properties

Production of Aqueous Colloidal Se Solution by Mechanical Dispersion

V. N. Kolokoltsev, G. E. Folmanis and M. A. Fedotov p. 699 abstract

Thermodynamics of the Processes of Evaporation of Nitrides of Chemical Elements

E. K. Kazenas, Yu. V. Tsvetkov, G. K. Astakhova, V. A. Volchenkova, N. A. Andreeva, O. A. Ovchinnikova and T. N. Penkina p. 705 abstract

Peculiarities of a Solid-Phase Method for the Production of Al–Fe/SiO₂ and Al–Co/SiO₂ Powder Catalysts

V. A. Artyukh, V. N. Borsch, V. S. Yusupov, S. Ya. Zhuk, V. A. Zelensky, G. Yu. Lazarenko and B. F. Belelyubsky p. 709 abstract

Comparative Investigation of the Structure, Phase Composition, and Mechanical Properties of Ni-Based High-Temperature Alloys Manufactured by Different Methods

A. Yu. Tokmacheva-Kolobova, S. S. Manokhin, V. N. Sanin, D. M. Ikornikov, D. E. Andreev, M. G. Tokmachev, A. F. Zverev and E. G. Kolobova p. 713 abstract

Physicochemical Characteristics of Copper Microstrip Lines of Microwave ICs Passivated with Accelerated Argon Ions

I. V. Perinskaya and V. V. Perinsky p. 721 abstract

Fabrication of Bismuth Films by a Melt Spinning Method and the Influence of Annealing on Their Microstructure

G. N. Kozhemyakin, S. Yu. Kovalev and O. N. Soklakova p. 727 abstract

Methodical Features of Tensile Testing of Ring Samples

M. V. Leontieva-Smirnova, B. A. Kalin, E. M. Morozov, A. V. Kostyukhina, P. V. Fedotov and R. N. Taktashev p. 731 abstract

Physical and Chemical Methods for Increasing the Hydrophilicity of the Surface of Aliphatic Polyesters for Tissue-Engineered Constructs

A. G. Dunaev, A. O. Mariyanats, M. A. Syachina, E. M. Trifanova and V. K. Popov p. 739 abstract

Copper–Tin Materials for Tribotechnical Purposes