Vol. 10, No. 3, 2019

Inorganic Materials: Applied Research

Effects of Energy Fluxes on Materials

Influence of Pulsed Beams of Deuterium Ions and Deuterium Plasma on the Aluminum Alloy of Al–Mg–Li System

V. N. Pimenov, G. G. Bondarenko, E. V. Dyomina, S. A. Maslyaev, V. A. Gribkov, I. P. Sasinovskaya, N. A. Epifanov, V. P. Sirotinkin, G. S. Sprygin, A. I. Gaydar and M. Paduch p. 503 abstract

Synthesis, Structure, and Properties of Superconductors under the Action of Plasma Shock Waves

B. P. Mikhailov, V. Ya. Nikulin, A. B. Mikhailova, P. V. Silin, I. V. Borovitskaya and V. F. Shamray p. 512 abstract

The Competition of Intermediate Phases in the Diffusion Zone

A. M. Gusak, O. Yu. Lyashenko and F. Hodaj p. 517 abstract

Effect of Irradiation on Interdiffusion in Fe–Cr System

D. N. Demidov and E. A. Smirnov p. 525 abstract

Formation of Residual Stresses in the Surface Layers of Titanium Alloy Targets Irradiated with High-Current Pulsed Electron Beams

V. A. Shulov, I. G. Steshenko, D. A. Teryaev, Yu. A. Perlovich, M. G. Isaenkova and V. A. Fesenko p. 529 abstract

Ultrasonic Absorption at Low Temperatures Subject to the Fermi Liquid Correlation of Electrons

Yu. A. Kashlev and N. A. Vinogradova p. 532 abstract

Determination of Temperature Dynamics of Materials under Laser Heating by the Method of Spectral Pyrometry

B. A. Lapshinov and N. I. Timchenko p. 535 abstract

Condition of Surface of Titanium after Pulsed X-ray Exposure

A. E. Ligachev, M. V. Zhidkov, S. A. Sorokin, Yu. R. Kolobov and G. V. Potemkin p. 541 abstract

Plasmochemical Methods of Production and Treatment of Materials

Local Ion Nitriding of Martensitic Structural Steel in Plasma of Glow Discharge with Hollow Cathode

Yu. G. Khusainov and K. N. Ramazanov p. 544 abstract

Cermet Plasma Coatings with Titanium Carbide

V. I. Kalita, D. I. Komlev, G. A. Pribytkov, A. V. Baranovsky, A. A. Radyuk, V. V. Korzhova, A. Yu. Ivannikov, A. V. Alpatov, M. G. Krinitsyn and A. B. Mikhaylova p. 549 abstract

Internal Stresses in Plasma Deposited Polymer Film Coatings

M. P. Danilaev, E. A. Bogoslov, Yu. E. Polsky, I. V. Yanilkin, I. R. Vakhitov, A. I. Gumarov and L. R. Tagirov p. 556 abstract

The Energetic Structure of Plasma Arc Anode under Reduction Melting of Quartz-Leucoxene Concentrate

A. A. Nikolaev, D. E. Kirpichyov and A. V. Nikolaev p. 560 abstract

Effect of the Conditions of Formation of W–C Nanopowders in a Plasma Jet on the Synthesis of Hexagonal Tungsten Carbide

Yu. V. Blagoveshchensky, N. V. Alexeev, A. V. Samokhin, N. V. Isaeva, M. A. Sinaysky and Yu. V. Tsvetkov p. 566 abstract

Conditions for Plasma Jet Formation in a Laminar Plasmatron

A. M. Kruchinin, M. Ya. Pogrebisskiy, E. S. Ryazanova and A. Yu. Chursin p. 572 abstract

Functional Coatings and Surface Treatment

Change in the Morphology of the Surface of Ta–W Coating after Exposure to Cyclic Laser Pulses

T. G. Karnavskaya, P. Yu. Kikin, V. N. Perevezentsev, E. N. Razov and E. E. Rusin p. 578 abstract

Formation of the Structure via Electron Beam Cladding of Coatings by Titanium Carbide–Titanium Binder Powders

G. A. Pribytkov, M. G. Krinitcyn, V. V. Korzhova, I. A. Firsina, A. V. Baranovskiy and V. G. Durakov p. 582 abstract

Structure and Properties of Composite Nickel Coatings Deposited by Means of Programmable Pulsed Current under Laser Irradiation

V. V. Tytarenko, V. A. Zabludovsky and E. Ph. Shtapenko p. 589 abstract

Structure, Phase Composition, and Hardness of Coatings Obtained by High-Energy Electron Beam Cladding of a Mixture of Cr₃C₂ and TiC Powders on Low-Carbon Steel

T. A. Krylova, K. V. Ivanov and V. E. Ovcharenko p. 595 abstract

Formation of MAO-Coatings on the Substrate of Carbon Structural Steels in Solutions with Finely Dispersed Corundum

O. E. Tchufistov and E. A. Tchufistov p. 600 abstract

Structure and Properties of Electro-Explosive TiC–Ni–Mo Coatings of Die Steel after Electron-Beam Treatment

D. A. Romanov, E. M. Kuziv, V. A. Bataev, V. E. Gromov and Yu. F. Ivanov p. 606 abstract

Numerical Simulation of Metal Surface Layer Modification Using High-Frequency Induction Heating

V. N. Popov and V. G. Shchukin p. 616 abstract

Increase in Wear Resistance of the Surface Layers of AK10M2N Silumin at Electron-Beam Treatment

D. V. Zagulyaev, V. E. Gromov, S. V. Konovalov and Yu. F. Ivanov p. 622 abstract

Methods for Regulation of Physicochemical and Biological Properties of the Surface of Poly(hydroxybutyrate-co-hydroxyvalerate) Film Specimens

E. A. Nemets, V. A. Surguchenko, A. P. Pankina, S. T. Metelsky and V. I. Sevastianov p. 629 abstract

Composite Materials

Technological Parameters of Production and Properties of Babbit-Based Composite Surfacing Rods and Deposited Antifriction Coatings

I. E. Kalashnikov, A. G. Kolmakov, L. K. Bolotova, P. A. Bykov, L. I. Kobeleva, R. S. Mikheev and M. L. Kheifets p. 635 abstract

The Effect of Uniaxial Extrusion on the Degree of Reinforcement of Nanocomposites Polyvinyl Chloride/Boron Nitride

G. V. Kozlov and I. V. Dolbin p. 642 abstract

Deformation Stimulated Luminescence of a Composite Produced on the Basis of Polymethylmethacrylate Transparent in the Visible Region and Finely Dispersed Powder of SrAl₂O₄:(Eu²⁺, Dy³⁺) Phosphor

A. F. Banishev and A. A. Banishev p. 647 abstract

Using Nickel Nanopowders with Different Morphologies for Fabrication of Highly Porous Nickel Materials

V. A. Zelensky, A. B. Ankudinov, M. I. Alymov, N. M. Rubtsov, I. V. Tregubova and N. V. Petrakova p. 652 abstract

Dielectric Properties of Polyethylene/TiO₂ Composites

A. M. Magerramov, M. M. Kuliev, R. S. Ismayilova and R. S. Abdullaev p. 658 abstract

On Correlation between Powder Dispersity and Hysteresis Characteristics with Regard to Magnets Based on (Sm, Zr)(Co, Cu, Fe)_z Alloys

N. A. Dormidontov, G. S. Burkhanov, N. B. Kolchugina, A. G. Dormidontov and Yu. V. Milov p. 662 abstract

Metal-Carbon Nanocomposites FeNi/C: Production, Phase Composition, Magnetic Properties

D. G. Muratov, A. A. Vasilev, M. N. Efimov, G. P. Karpacheva, E. L. Dzidziguri and P. A. Chernavskiy p. 666 abstract

Formation and Structure Features of the Weld Joints Made by Friction Stir Welding

A. A. Chularis, R. A. Rzaev and A. G. Valisheva p. 673 abstract

Features of the Plastic Flow of Sintered Al–12Si–xSn Alloys

N. M. Rusin and A. L. Skorentsev p. 682 abstract

Cold Sintering of Ni–Ag Nanocomposite Particles Produced by Electric Explosion of Wires

A. F. Sharipova, O. V. Bakina, A. S. Lozhkomoev, E. A. Glazkova, A. V. Pervikov, N. V. Svarovskaya, M. I. Lerner, S. G. Psakhie, I. Gotman and E. Y. Gutmanas p. 691 abstract

New Methods of Treatment and Production of Materials with Required Properties

Synthesis of Bimetal Fe–Pb Janus Nanoparticles via the Electric Explosion of Iron and Lead Conductors

A. V. Pervikov, M. I. Lerner, O. V. Bakina, A. S. Lozhkomoev and E. A. Glazkova p. 699 abstract

Kinetics of Reduction of α-Fe₂O₃ Nanopowder with Hydrogen under Power Mechanical Treatment in an Electromagnetic Field

Yu. V. Konyukhov, V. M. Nguyen and D. I. Ryzhonkov p. 706 abstract

Measurement of Hydrogen Diffusion in Zirconium Alloys by the Radioluminography Method

B. V. Ivanov, A. S. Anikin, A. N. Bukin, Ya. V. Sergeecheva, I. G. Lesina, N. S. Saburov, Yu. N. Devyatko and O. V. Khomyakov p. 713 abstract

Concept of Plastic Gas and Model Medium for Dilatable Isotropic Materials

E. S. Makarov, A. E. Gvozdev, G. M. Zhuravlev, V. S. Yusupov, N. N. Sergeev, O. M. Gubanov and I. A. Tsyganov p. 721 abstract

Studying the Machinability of Tin-Bearing Free-Cutting Steel

Zhang Yong-jun and Han Jing-tao p. 726 abstract

Structure Formation during Phase Separation of Poly(D,L-Lactide)–Tetraglycol–Antisolvent Ternary System

A. V. Mironov, A. O. Mariyanats, O. A. Mironova and V. K. Popov p. 730 abstract

Peculiarities of Application of the Gas Extraction Method for Determination of Hydrogen Content in Samples of Irradiated Zirconium Materials

G. V. Shishalova, G. P. Kobylyansky, A. A. Sheldyakov, V. Yu. Shishin and A. M. Novikov p. 737 abstract

Stress-Sensory Properties of Amorphous Co-Alloy Wires with Negative Magnetostriction under Elastic Deformation

V. V. Molokanov, T. R. Chueva, P. P. Umnov, N. V. Umnova, A. V. Krutilin and A. N. Shalygin p. 744 abstract

Impact of Thermal Tests Simulating Dry Storage of VVER-1000 Fuel on the Hydride Phase Morphology in Fuel Element Claddings