Vol. 9, No. 3, 2018

Inorganic Materials: Applied Research

Vol. 9, No. 3, 2018

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Inorganic Materials: Applied Research ISSN 2075-1133.

Effects of Energy Fluxes on Materials

Influence of the Test Temperature on the Creep Rate of 0.12C18Cr10NiTi Structural Steel Irradiated in the BN-350 Reactor

A. S. Dikov, I. I. Chernov and S. B. Kislitsin p. 357 abstract

Features of the Damage and the Structural Changes in the Tungsten Surface Layer under the Pulsed Action of Laser Radiation, Ion and Plasma Fluxes

E. V. Morozov, A. S. Demin, V. N. Pimenov, V. A. Gribkov, V. V. Roshchupkin, S. A. Maslyaev, S. V. Latyshev, E. V. Demina, E. E. Kazilin, A. G. Koltsov, G. G. Bondarenko and A. I. Gaydar p. 361 abstract

Effect of Boron Ion Implantation on the Structure, Phase Composition, and Mechanical Properties of Chromium-Fullerite-Chromium Films

L. V. Baran p. 370 abstract

Study of the Structure of Crater at the Surface of 12Cr18Ni10Ti Steel Irradiated by High-Power Pulsed Ion Beam

M. V. Zhidkov, A. E. Ligachev, G. V. Potemkin, S. S. Manokhin, G. E. Remnev and Yu. R. Kolobov p. 376 abstract

The Effect of Ion-Beam Treatment on the Mechanical, Morphological, and Biocompatible Properties of Titanium Medical Products

I. V. Perinskaya, I. V. Rodionov and L. E. Kuts p. 379 abstract

Plasmochemical Methods of Production and Treatment of Materials

Morphology of Polymer Film Coatings Produced in a Barrier Gas Discharge at Atmospheric Pressure

E. A. Bogoslov, M. P. Danilaev, Yu. E. Polskii, I. R. Vakhitov, A. I. Gumarov, I. V. Yanilkin and L. R. Tagirov p. 385 abstract

Calculation of Heat Transfer Characteristics of an Arc in a Gas Stream of Plasma-Arc Furnaces

A. M. Kruchinin, V. F. Kubarev, E. S. Ryazanova and A. Yu. Chursin p. 389 abstract

Synthesis of Aluminum Oxynitride Nanopowders in a Plasma Reactor with a Confined Jet Flow

A. V. Samokhin, A. G. Astashov, N. V. Alekseev, M. A. Sinaysky and Yu. V. Tsvetkov p. 393 abstract

Functional Coatings and Surface Treatment

Changes in the Elastic-Stress State and Phase Composition of TiAlN Coatings under Thermal Cycling

O. B. Perevalova p. 399 abstract

Structure and Mechanical Properties of TiAlSiY Vacuum-Arc Coatings Deposited in Nitrogen Atmosphere

V. M. Beresnev, O. V. Sobol, A. D. Pogrebnjak, S. V. Lytovchenko, S. A. Klimenko, V. A. Stolbovoy, P. A. Srebniuk, A. S. Manokhin, M. G. Kovaleva, V. Yu. Novikov, A. A. Meilekhov, U. S. Nyemchenko, A. E. Barmin and P. V. Turbin p. 410 abstract

Thermal Stability of TiZrAlN and TiZrSiN Films Formed by Reactive Magnetron Sputtering

G. Abadias, A. Yu. Daniliuk, I. A. Solodukhin, V. V. Uglov and S. V. Zlotsky p. 418 abstract

Gradient Structure Generated in Hardox 450 Steel with Built-Up Layer

S. V. Konovalov, V. E. Kormyshev, V. E. Gromov, Yu. F. Ivanov and E. V. Kapralov p. 427 abstract

Plasma Deposition of Ti–C–N Coatings in Air

A. A. Sivkov and D. Yu. Gerasimov p. 433 abstract

Structure and Properties of the Surface Layer of B₄C Ceramic Treated with an Intense Electron Beam

Yu. F. Ivanov, O. L. Khasanov, M. S. Petyukevich, G. V. Smirnov, V. V. Polisadova, Z. G. Bikbaeva, A. D. Teresov, M. P. Kalashnikov and O. S. Tolkachov p. 437 abstract

Structure and Wear Resistance of Plasma Coatings Sputtered Using TiC + HSS Binder Composite Powder

G. A. Pribytkov, V. I. Kalita, D. I. Komlev, V. V. Korzhova, A. A. Radyuk, A. V. Baranovsky, A. Yu. Ivannikov, M. G. Krinitcyn and A. B. Mikhailova p. 442 abstract

Relationship of the Structure and the Effective Diffusion Properties of Porous Zinc- and Copper-Containing Calcium Phosphate Coatings

N. N. Nazarenko, A. G. Knyazeva, E. G. Komarova, M. B. Sedelnikova and Yu. P. Sharkeev p. 451 abstract

The Effect of a Scanning Nanosecond Laser Pulse Beam on the Microtopography of Ceramic Al₂O₃ Coatings

Yu. A. Zheleznov, T. V. Malinsky, Yu. V. Khomich and V. A. Yamshchikov p. 460 abstract

Nonvacuum Surfacing of Protective Coatings Using a Low-Energy Electron Beam

S. Yu. Kornilov, N. G. Rempe and N. N. Smirnyagina p. 464 abstract

Composite Materials

Nanostructured Composite Materials Based on Al–Mg Alloy Modified with Fullerene C₆₀

I. A. Evdokimov, S. A. Perfilov, A. A. Pozdnyakov, V. D. Blank, R. Kh. Bagramov, I. A. Perezhogin, B. A. Kulnitsky, A. N. Kirichenko and V. V. Aksenenkov p. 472 abstract

Structure and Properties of the B83 Babbit Alloy Based Composite Materials Produced by Extrusion

L. K. Bolotova, I. E. Kalashnikov, L. I. Kobeleva, P. A. Bykov, I. V. Katin, A. G. Kolmakov and N. B. Podymova p. 478 abstract

Photoluminescence Features and Mechanoluminescence Mechanism Inherent in Composite Materials Based on a Photopolymerizing Resin and Finely Dispersed Powders of SrAl₂O₄:(Eu²⁺,Dy³⁺) and Sr₄Al₁₄O₂₅:(Eu²⁺,Dy³⁺,B) luminophores

A. A. Banishev and A. F. Banishev p. 484 abstract

Activated Sintering of Cu-Al₂O₃ powders

A. G. Meilakh, Yu. V. Kontsevoy, A. B. Shubin, E. A. Pastukhov and I. S. Sipatov p. 490 abstract

Spark-Plasma Sintering of Al₂O₃–Graphene Nanocomposite

A. G. Zholnin, E. A. Klyatskina, E. G. Grigoryev, M. D. Salvador, A. A. Misochenko, P. L. Dobrokhotov, M. G. Isaenkova, M. A. Sinaysky and V. V. Stolyarov p. 498 abstract

Features of Uniaxial and Biaxial Deformation of the Contact Boundary of Metals during Explosion Welding

A. A. Aushev, A. N. Balandina, E. N. Grishin, O. B. Drennov, A. M. Podurets and M. I. Tkachenko p. 504 abstract

Structure and Magnetic Properties of Nd–Fe–B Magnets Prepared from DyH₂-Containing Powder Mixtures

G. S. Burkhanov, N. B. Kolchugina, A. A. Lukin, Yu. S. Koshkidko, J. Cwik, K. Skotnicova and V. V. Sitnov p. 509 abstract

Ignition of Some Powder Mixtures of Metals with Teflon

S. G. Vadchenko, M. I. Alymov and I. V. Saikov p. 517 abstract

New Methods of Treatment and Production of Materials with Required Properties

Magnetic Hysteresis and Mechanical Properties of Hard Magnetic Fe–27Cr–15Co–2Mo–Si–Ti–V Alloy

I. M. Milyaev, V. S. Yusupov, S. Yu. Ostanin, S. I. Stelmashok, A. I. Milyaev and N. V. Laysheva p. 523 abstract

Formation of Axially Aligned Polydisperse Nanocarbon Structures via Chemical Vapor Deposition from Cyclohexane with Ferrocene

A. V. Makunin, N. G. Chechenin, E. A. Vorobyeva and D. A. Pankratov p. 530 abstract

Application of the High-Voltage Nanosecond Discharge for the Control of Proliferation of Fibroblast Cells on the Surface of Fluorine-Carbon Polymer Implants

D. A. Korotkov, S. V. Korotkov, G. L. Spichkin and L. M. Fedotova p. 535 abstract

Nanotechnologies of the Treatment and Production of Complex Transition Metal Oxides with High Photothermal Effect

P. Yu. Gulyaev, M. K. Kotvanova and A. I. Omelchenko p. 540 abstract

Investigation of the Zirconium Forms in Nickel Melts Containing Exogenous Refractory Oxide Nanophases

S. N. Anuchkin, E. K. Kazenas, V. A. Volchenkova, N. A. Andreeva and T. N. Penkina p. 546 abstract

Texture and Anisotropy Parameters of Pressed MA14 Alloy Pipes Produced by Granule Metallurgy Methods