Vol. 8, No. 3, 2017

Inorganic Materials: Applied Research

Vol. 8, No. 3, 2017

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Inorganic Materials: Applied Research ISSN 2075-1133.

Effects of Energy Fluxes on Materials

Effects of Impurities on the Rate of Radiation Creep and Vacancy Swelling in Fe-Based Austenite Alloys

D. N. Demidov and E. A. Smirnov p. 353 abstract

Laser-Plasma Sources of Ionizing Radiation for Simulation of Radiation Effects in Microelectronic Materials and Components

I. N. Tsymbalov, K. A. Ivanov, R. V. Volkov, A. B. Savel’ev, L. S. Novikov, L. I. Galanina, N. P. Chirskaya, V. Yu. Bychenkov and A. I. Chumakov p. 359 abstract

Effect of Ion Polishing on Corrosion Resistance of the Cladding of Fuel Elements from E110 Alloy in the Steam Water Environment

B. A. Kalin, N. V. Volkov, R. A. Valikov and A. S. Yashin p. 364 abstract

Changes in the Characteristics of the Fine Structure of the ChS-68 Steel under Neutron Irradiation

N. V. Glushkova, V. A. Tsygvintsev, A. V. Kozlov and V. L. Panchenko p. 370 abstract

Radiation-Induced Changes in the Structure and Mechanical Properties of Fe–Mo Alloy under Electron Irradiation

A. B. Tsepelev, A. S. Ilyushin, T. Yu. Kiseleva, E. A. Brovkina and V. N. Melnikov p. 378 abstract

Influence of Cyclic Laser Pulses on Degradation of a Tantalum Coating

T. G. Karnavskaya, P. Yu. Kikin, V. N. Perevezentsev and E. E. Rusin p. 382 abstract

Texture Formation in the Surface Layer of VT6 Alloy Targets Irradiated by Intense Pulsed Electron Beams

V. A. Shulov, A. N. Gromov, D. A. Teryaev, Yu. A. Perlovich, M. G. Isaenkova and V. A. Fesenko p. 387 abstract

Plasmochemical Methods of Production and Treatment of Materials

Investigation of the Effect of a Low-Temperature Plasma of Vapor–Gas Discharges with the Use of Electrolytic Electrodes at Lower Pressure on Products of Complex Shape

Al. F. Gaisin p. 392 abstract

Effect of the Opening Angle of the Gas-Discharge Path on the Power Efficiency of a Plasmatron

E. Kh. Isakaev, A. S. Tyuftyaev and M. Kh. Gadzhiev p. 396 abstract

Qualitative Study of Steel Cutting with the Use of the Narrow Jet Plasma Technology

S. V. Anakhov, N. B. Pugacheva, Yu. A. Pykin, A. V. Matushkin and T. M. Bykova p. 400 abstract

Thermochemical Plasma-Arc Treatment of Leucoxene Concentrate

A. A. Nikolaev, D. E. Kirpichev, A. V. Samokhin and A. V. Nikolaev p. 406 abstract

The Influence of a Powerful Stream of Deuterium Ions and Deuterium Plasma on the Structural State of the Surface Layer of Titanium

A. S. Demin, E. V. Morozov, S. A. Maslyaev, V. N. Pimenov, V. A. Gribkov, E. V. Demina, I. P. Sasinovskaya, V. P. Sirotinkin, U. S. Sprygin, G. G. Bondarenko, A. N. Tikhonov and A. I. Gaidar p. 412 abstract

Small-Angle X-ray Scattering Investigation of Carbon- and Titanium-Containing Nano- and Microparticles Deposited from an Arc-Discharge Low-Temperature Plasma

N. A. Smolanov and V. A. Neverov p. 419 abstract

Functional Coatings and Surface Treatment

Elemental and Phase Composition of TiB₂–Mo Coating Sprayed on a Steel by Electro-Explosive Method

D. A. Romanov, E. N. Goncharova, E. A. Budovskikh, V. E. Gromov, Yu. F. Ivanov and A. D. Teresov p. 423 abstract

Tribological Properties of Babbitt Alloy Coatings Modified with Carbon Nanotubes

N. V. Kobernik, R. S. Mikheev, I. E. Kalashnikov, L. I. Kobeleva and L. K. Bolotova p. 428 abstract

Elastic Stresses and Microstructure of TiAlN Coatings

O. B. Perevalova, A. V. Panin, M. P. Kalashnikov, A. A. Akulinkin, I. A. Bozhko and V. P. Sergeev p. 434 abstract

The Boundary between the Hydroxyapatite Coating and Titanium Substrate

V. I. Kalita, A. A. Radyuk, D. I. Komlev, A. Yu. Ivannikov, V. S. Komlev and K. Yu. Demin p. 444 abstract

Composite Materials

Production of Spherical Powders on the Basis of Group IV Metals for Additive Manufacturing

V. I. Kotlyarov, V. T. Beshkarev, V. E. Kartsev, V. V. Ivanov, A. A. Gasanov, E. A. Yuzhakova, A. V. Samokhin, A. A. Fadeev, N. V. Alekseev, M. A. Sinayskiy and E. V. Tretyakov p. 452 abstract

Structural Characteristics of a Mechanically Alloyed Al–Fe Powder Composite

V. A. Artyukh, V. S. Yusupov, V. A. Zelensky, M. S. Kholin and R. S. Fakhurtdinov p. 459 abstract

Chromium Concentration Profiles in Vacuum-Sintered Fe–Cr–Co Alloys

A. S. Ustyukhin, M. I. Alymov, P. M. Krishenik, Yu. V. Levinsky and S. A. Rogachev p. 464 abstract

The Influence of Iron Powder Cladding with Nickel on Properties of Sintered Materials

A. G. Meilakh p. 469 abstract

New Methods of Treatment and Production of Materials with Required Properties

Deagglomeration of Nanostructured Aluminum Oxyhydroxide upon Shock Wave Impact of Electrohydraulic Discharge

M. I. Lerner, I. A. Gorbikov, O. V. Bakina and S. O. Kasantzev p. 473 abstract

The Form of the Existence of Al in Fe–Sn Melts with Exogenous Nanoparticles of Refractory Oxides

V. T. Burtsev, S. N. Anuchkin, E. K. Kazenas, V. A. Volchenkova, N. A. Andreeva and T. N. Penkina p. 479 abstract

Application of Thermal Analysis Technique for Development of Technology of Melt Preparation to Obtain “Thick” Amorphous Co-Alloy Microwires