Contents

Inorganic Materials: Applied Research

Vol. 17, No. 2, 2026

PHYSICOCHEMICAL PRINCIPLES OF CREATING MATERIALS AND TECHNOLOGIES

Strain Sensitivity of Conductivity of Composites Based on Polypropylene and Carbon Nanotubes: Experimental and Numerical Studies of the Effect of Glass Fiber Reinforcement

O. V. Lebedev, T. S. Kurkin, M. Yu. Yablokov, E. K. Golubev, and A. N. Ozerin p. 245  abstract

Calcium Phosphate Materials for Osteoplasty and Their Prospects as Anticancer Drug Delivery Systems: a Review of Research and Development

N. A. Lebedeva, E. V. Galitsyna, N. V. Volkova, and N. A. Ulyakina p. 255  abstract

Chemical Composition and Tribological Properties of Diamond-Like Coatings Formed by Pulsed Laser Deposition of Carbon in a Reactional Gas—Hydrogen Sulfide

S. N. Grigoriev, D. V. Fominski, V. N. Nevolin, M. A. Volosova, A. I. Grunin, K. Yu. Maksimova, and V. Yu. Fominski p. 267  abstract

MATERIALS FOR AVIATION AND SPACE TECHNOLOGY

Synthesis and Properties of a Composite Material Based on Polyethylene, Bismuth Oxide, and Boron Carbide

V. I. Pavlenko, G. G. Bondarenko, N. I. Cherkashina, and D. S. Romanyuk p. 276  abstract

MATERIALS OF ELECTRONIC TECHNIQUES

Studies of Nonlinear Chalcogenide Crystals for the Mid-Ir Range

S. I. Lobanov, P. G. Krinitsyn, A. F. Kurus, A. P. Eliseev, K. E. Kozhneva, A. A. Goloshumova, V. N. Vedenyapin, A. Y. Tarasova, and L. I. Isaenko p. 283  abstract

Deposition of AlQ3 Thin Films with Detectable Crystallinity without Post-Processing

A. I. Koptyaev and G. L. Pakhomov p. 289  abstract

Ferroelectric Piezoelectric Ceramics Based on Alkali Metal Niobates

D. I. Zorin, E. V. Glazunova, I. N. Andryushina, S. I. Dudkina, I. A. Verbenko, and L. A. Reznichenko p. 296  abstract

MATERIALS FOR QUANTUM ELECTRONICS AND PHOTONICS

Magnetorheological Polishing of KDP Crystals Surface

D. V. Belov, S. N. Belyaev, N. A. Sorokoletova, and E. I. Serebrov p. 301  abstract

MATERIALS FOR HUMAN LIFE SUPPORT AND ENVIRONMENTAL PROTECTION

The Influence of Organic and Inorganic Plasticizing Agents on the Properties of Alumina Supports and CoMo/Al2O3 Hydrotreating Catalysts of Diesel Fractions. Part 2. CoMo/Al2O3 Hydrotreating Catalysts Based on Alumina Supports

P. P. Mukhacheva, Yu. V. Vatutina, K. A. Nadeina, I. G. Danilova, P. P. Dik, V. P. Pakharukova, E. Yu. Gerasimov, I. P. Prosvirin, O. V. Klimov, and A. S. Noskov p. 313  abstract

Synthesis of a Composite Material Based on Selenite-Substituted Hydroxyapatite and Collagen

S. M. Sipyagina and O. A. Golovanova p. 326  abstract

High-Entropy Bioceramics Based on Mixed-Cationic Silicon Germanium Phosphates with Glaserite-Like Structure

N. V. Leontiev, D. S. Larionov, D. O. Golubchikov, Ya. Yu. Filippov, E. S. Klimashina, V. A. Bitanova, A. M. Murashko, I. M. Scherbakov, P. V. Evdokimov, and V. I. Putlayev p. 336  abstract

Preparation of Core-Shell Nanofibers and Insights from Molecular Dynamics Simulations for Interaction between Polycaprolactone Core and Collagen Shell

K. Y. Kotyakova, K. G. Gasparyan, Yu. A. Makarets, U. U. Narzulloev, A. I. Ogarkov, L. F. Tomilin, L. A. Varlamova, L. Y. Antipina, and D. V. Shtanskii p. 345  abstract

Apatite Foam Spheres Formed on Open-Pore Calcium Phosphate Foam Ceramics

V. K. Krut’ko, L. Yu. Maslova, O. N. Musskaya, and A. I. Kulak p. 351  abstract

Elastic Constants of Hyperelastic Material Models

S. A. Muslov and A. I. Lotkov p. 359  abstract

Phenol Sorption by Highly Porous Carbon Materials Based on Vegetable Waste from Rapeseed Processing

D. A. Badin, S. O. Rybakova, A. N. Timirgaliev, O. A. Ananyeva, I. V. Burakova, and A. E. Burakov p. 364  abstract

Effect of Composition on Viscosity of Solutions and Structure of Highly Porous Composite Materials of Alginate-Polyvinylpyrrolidone-Carbonate Hydroxyapatite

A. A. Grechishnikova, E. S. Trofimchuk, A. A. Egorov, O. S. Antonova, S. K. Dedushenko, and I. V. Fadeeva p. 374  abstract

Investigation of the Influence of Binder Components on the Characteristics of Compacted Activated Carbon Material

I. N. Shubin p. 384  abstract

GENERAL PURPOSE MATERIALS

Study of the Properties of Nanocomposites Based on a Mixture of High- and Low-Pressure Polyethylenes with Cobalt-Containing Nanofillers

G. G. Mamedova, N. I. Kurbanova, T. M. Gulieva, and E. G. Iskenderova p. 390  abstract

Study of Corrosion-Fatigue Fracture of Industrial Aluminum Alloys Al–Mg

O. A. Belkin, M. K. Chegurov, V. N. Chuvil’deev, A. V. Nokhrin, A. N. Sysoev, A. V. Komel’kov, N. A. Kozlova, N. N. Berendeev, and V. D. Chupriyanova p. 396  abstract

Fracture Toughness of Ceramic Composites Based on ZrB2, TiB2, and SiC with Low-Modulus h-BN Inclusions

M. P. Lukyanets, A. S. Buyakov, I. A. Fotin, V. V. Shmakov, E. V. Abdulmenova, M. A. Rudmin, and S. P. Buyakova p. 406  abstract

Study of Fatigue Strength of Fine-Grained Austenitic Steel 08Cr18Ni10Ti Produced by Rotational Forging

O. A. Belkin, M. K. Chegurov, V. I. Kopylov, D. A. Zotov, K. E. Smetanina, N. N. Berendeev, A. N. Sysoev, and A. V. Nokhrin p. 414  abstract

Control of Mechanical Properties of Cement Composites Using Modifier Additives

A. V. Puzatova, A. D. Kogai, M. A. Dmitrieva, and T. S. Khlebtsova p. 429  abstract

The Influence of Modified SiO2 on the Tribological Properties of a Polymer Composite Material Based on Polytetrafluoroethylene

N. P. Sivtseva-Gladkina, V. I. Fedoseeva, A. M. Spiridonov, and A. A. Okhlopkova p. 438  abstract

Influence of Plasticizer Content, Annealing, and Fiberglass Tension on the Mechanical Properties of Epoxy Resin-Based Composite

K. A. Drachev, A. V. Kazarbin, and V. I. Rimlyand p. 445  abstract

The Influence of Aluminum on the Physical and Mechanical Properties and Corrosion Resistance of Medium-Entropy Al–Co–Fe–C–Mo–W Alloys

M. A. Kudashev, A. Yu. Ivannikov, A. B. Mikhailova, and V. S. Yusupov p. 451  abstract

NEW TECHNOLOGIES FOR OBTAINING AND PROCESSING MATERIALS

Methods for Increasing the Compressive Strength of Glassy Carbon Foams

D. V. Ponomareva and E. I. Timoshchuk p. 455  abstract

Study of the Effect of Printing Orientation by Fused Deposition Modeling on Polymer Composite Mechanical Properties

A. V. Babaytsev and S. A. Shumskaya p. 465  abstract

Flame Spray Synthesis of Yttrium Oxide Powders for Transparent Ceramics

T. Evstropov, S. Balabanov, D. Kosyanov, and J. Li p. 470  abstract

Study of the Influence of Vanadium Intermediate Layer on the Formation of Compound AlMg6–Vanadiun–12Cr18Ni10Ti During Explosion Welding

A. Yu. Malakhov, N. N. Niyozbekov, I. V. Denisov, D. V. Shakhray, V. A. Sosikov, O. D. Boyarchenko, and V. O. Kopytskiy p. 481  abstract

Analysis of the Influence of Ultrasonic Vibrations on the Microstructure of Stainless Steel During Direct Laser Deposition

I. V. Shvarts, S. A. Nikiforov, A. I. Gorunov, and A. Kh. Gilmutdinov p. 488  abstract

Nanostructured Hybrid Powders Based on Zirconia and Oxygen-Free Graphene—New Raw Materials for Fine-Grained Ceramics

E. A. Trusova, A. M. Afzal, S. V. Shevtsov, D. S. Nikitin, A. Nassyrbayev, N. V. Petrakova, A. Yu. Teplova, and M. G. Safronenko p. 497  abstract

Friction Processing of Plasma Layered Ni–TiС–FeNiMo–Ni Coating on a Cylindrical Titanium Substrate

V. I. Kalita, D. I. Komlev, A. A. Radyuk, and A. B. Mikhailova p. 510  abstract

Production of Ceramic Composite Materials Based on Stabilized Zirconium Dioxide by the Free SHS Compression Method

A. P. Chizhikov, M. S. Antipov, A. S. Konstantinov, and P. M. Bazhin p. 520  abstract

Synthesis of Functional-Gradient Material by Direct Laser Deposition with Ultrasonic Impact

I. V. Shvarts, S. A. Nikiforov, A. I. Gorunov, and A. Kh. Gilmutdinov p. 529  abstract

Production of Aluminum Powders and Aluminum-Based Composites in a High-Speed Arc Discharge Plasma Jet

D. S. Nikitin, A. Nassyrbayev, I. I. Shanenkov, A. I. Tsimmerman, and A. A. Sivkov p. 536  abstract

Chemical Vapor Deposition of Tungsten Borides

A. V. Poligenko, K. M. Osipov, E. A. Ruban, A. A. Shaporenkov, and V. V. Dushik p. 546  abstract

Synthesis of a Pre-Ceramic Aluminoimine Precursor for Stereolithographic 3D Printing of Aluminum Nitride Ceramics

N. V. Leontiev, D. S. Larionov, P. V. Evdokimov, and V. I. Putlayev p. 554  abstract

Study of the Rheological Characteristics of a Zirconium Dioxide Suspension for Gel Casting

E. A. Shokodko, A. I. Sitnikov, A. V. Shokodko, A. S. Chernyavskii, S. S. Strelnikova, and K. A. Solntsev p. 561  abstract

Study of Microstructural Changes in the Volume of Polyimide Films Under the Influence of a Laser with a Wavelength of 1.06 Micrometers

E. V. Matveev, A. I. Gaidar, B. A. Lapshinov, and V. V. Berestov p. 566  abstract

METHODS FOR STUDYING THE PROPERTIES OF MATERIALS

Heat Capacity and Changes in the Thermodynamic Functions of the Aluminum Conductor Alloy AlV0.1, Doped with Sodium as a Function of Temperature

I. N. Ganiev, Sh. Sh. Okilov, D. Ch. Kurbonov, and D. K. Azizova p. 576  abstract

Estimation of Gas Pressure in Closed Pores by Ultrasonic Method

S. I. Averin and M. I. Alymov p. 583  abstract

Study of Deformation and Destruction Mechanisms of Fibrous Composite Materials by Acoustic Emission Method

A. G. Penkin, I. O. Bannykh, V. I. Antipov, A. G. Kolmakov, N. A. Minina, and Yu. E. Mukhina p. 589  abstract

Determination of Impurities in Isotopically Enriched Tetrakis(Trifluorophosphine) Nickel (58Ni(PF3)4) by Gas Chromatography-Mass Spectrometry (GC-MS)

A. Yu. Sozin, O. Yu. Chernova, T. G. Sorochkina, D. M. Zimina, O. Yu. Troshin, and A. D. Bulanov p. 596  abstract