Vol. 15, No. 2, 2024

Inorganic Materials: Applied Research

Physicochemical Fundamentals of Creating Materials and Technologies

p–T–x State Diagram of the Co–Mg System

Y. V. Levinsky, E. V. Vershinina and M. I. Alymov p. 231 abstract

Intermetallic Alloys Based on γ'Ni₃Al: Part I. Features of the Structure, Formation of (γ' + γ) Structures, and Alloying

A. A. Drozdov, K. B. Povarova, O. A. Bazyleva, A. V. Antonova, M. A. Bulakhtina, N. A. Alad’ev, A. E. Morozov and I. S. Pavlov p. 235 abstract

Features of the Application of Promising Catalysts from Amorphous Molybdenum Sulfide in the Creation of p-Si and pn-Si Photocathodes for the Production of Hydrogen in an Acidic Solution

V. N. Nevolin, O. V. Rubinkovskaya, D. V. Fominski, R. I. Romanov and V. Yu. Fominski p. 251 abstract

Thermodynamic Analysis of Aluminum Oxide Chlorination

T. Vetchinkina p. 260 abstract

Materials for Aviation and Space Techniques

Structure of Al₈₂Cu₇Fe₁₁ Alloy After High-Speed Quenching

N. D. Bakhteeva, E. V. Todorova, P. P. Umnov, T. R. Chueva, N. V. Gamurar, N. V. Petrakova and T. A. Sviridova p. 266 abstract

Electronic Materials

Electrical Properties of the Li_0.03Na_0.97Ta_yNb_{1 –} _yO₃ (y = 0.1–0.7) Ceramic Solid Solutions with a Perovskite Structure in the Region of the Antiferro-Ferroelectric Transition

V. V. Efremov, M. N. Palatnikov and O. B. Shcherbina p. 273 abstract

Advanced Layered Flexible Radio-Absorbing Materials Based on Powdered Charcoal

O. V. Boiprav and V. A. Bogush p. 280 abstract

Application of the Bridgman Method to Obtain Thermoelectric Silicon Doped with Germanium and Phosphorus

M. V. Dorokhin, Yu. M. Kuznetsov, P. B. Demina, I. V. Erofeeva, A. V. Zdoroveyshchev, M. V. Ved’, D. A. Zdoroveyshchev, A. Yu. Zavrazhnov, I. N. Nekrylov, S. M. Peshcherova, R. V. Presnyakov and N. V. Sakharov p. 289 abstract

Materials for Power Industry and Radiation Resistant Materials

Controlling the Electrode Morphology and Surface Energy to Make Ethanol Fuel Cells Based on Pd-Assisted Etched Porous Silicon

O. V. Volovlikova and S. A. Gavrilov p. 296 abstract

Effect of Synthesis Conditions on the Physicochemical Properties of Xerogels, Nanopowders, and Ceramic Materials in the CeO₂–Nd₂O₃ System

M. V. Kalinina, D. A. Dyuskina, T. V. Khamova, L. N. Yefimova, I. Yu. Kruchinina and O. A. Shilova p. 307 abstract

Effect of Irradiation with ¹³²Xe²⁷⁺ Ions at Different Angles on the Critical Parameters of Second-Generation HTSC Tapes Based on GdBa₂Cu₃O_7–x

L. Kh. Antonova, V. K. Semina and A. V. Troitskii p. 314 abstract

Verifying a Two-Dimensional Model Simulating Attenuation of Neutron and Photon Radiation from Nuclear Reactors Having Metal Hydride Composite Protection

R. N. Yastrebinsky, G. G. Bondarenko, V. I. Pavlenko, A. V. Yastrebinskaya and A. I. Gorodov p. 319 abstract

Materials for Human Life Support and Environmental Protection

Mechanical Properties of Unalloyed Titanium Processed by Selective Laser Melting and Rotary Swaging

M. Yu. Gryaznov, S. V. Shotin, V. N. Chuvildeev, A. N. Sysoev, D. N. Kotkov, A. V. Piskunov, N. V. Sakharov, A. V. Semenycheva and A. A. Murashov p. 328 abstract

A Percutaneous Delivery System for a Nicotinamide Transdermal Therapeutic System

E. G. Kuznetsova, V. A. Ryzhikova, L. A. Salomatina, O. M. Kuryleva and V. I. Sevastianov p. 336 abstract

Cryochemical Synthesis of Tricalcium Phosphate Powders and Mixed Sodium-Containing Silicophosphates and Phosphate-Germanates for Formation of Bioceramics Using Stereolithographic 3D Printing

D. S. Larionov, V. A. Bitanova, P. V. Evdokimov, A. V. Garshev, O. A. Shlyakhtin and V. I. Putlyaev p. 344 abstract

The Influence of Fillers on the Structure of Siloxane Films

A. S. Baikin, E. O. Nasakina, A. A. Melnikova, A. V. Mikhailova, M. A. Kaplan, K. V. Sergienko, S. V. Konushkin, A. G. Kolmakov and M. A. Sevostyanov p. 352 abstract

Cryogenically Structured Extracellular Matrix Mimetic Based on a Concentrated Collagen-Containing Solution

Yu. B. Basok, A. M. Grigoriev, V. I. Lozinsky, L. A. Kirsanova, V. K. Kulakova, E. A. Podorozhko, I. A. Novikov and V. I. Sevastianov p. 358 abstract

A Study of Promising Carbon Sorbents Prepared via High-Temperature Activation in Purification Processes of Aqueous Solutions from Dyes

E. S. Mkrtchyan, A. A. Popova and I. N. Shubin p. 367 abstract

New Silicon-Rich Mineral-Based Materials and Their Use for Remediation of Hydrocarbon-Contaminated Soil

E. A. Bocharnikova, D. V. Demin and V. V. Matichenkov p. 375 abstract

Obtaining and Studying In Situ a Chitosan–Titanium Dioxide Composite Material for Agriculture

A. S. Baikin, A. A. Melnikova, K. S. Sergeeva, A. S. Baryshev, R. V. Pobedonostsev, M. A. Kaplan, D. D. Baranova, V. M. Andreevskaya, S. V. Zhelezova, A. G. Kolmakov and M. A. Sevostyanov p. 383 abstract

The Influence of Crosslinking Agents on the Matrix Properties of Hydrogel Structures Based on Sodium Alginate

M. A. Khvorostina, P. Y. Algebraistova, I. A. Nedorubova, T. B. Bukharova, D. V. Goldshtein, A. Y. Teterina, V. S. Komlev and V. K. Popov p. 388 abstract

Effect of Heat Treatment on the Structure and Mechanical Properties of Ti–10Nb–(1–3)Mo Alloys

S. V. Konushkin, M. A. Kaplan, K. V. Sergienko, A. D. Gorbenko, Y. A. Morozova, A. Yu. Ivannikov, M. A. Sudarchikova, T. M. Sevostyanova, E. O. Nasakina, S. A. Mikhlik, A. G. Kolmakov and M. A. Sevostyanov p. 395 abstract

Evolution of the Composition and Morphology of Ti–18 Zr–15 Nb Alloy Powder during Calcium Hydride Synthesis

G. V. Markova, S. N. Yudin, I. A. Alimov, S. S. Volodko, A. M. Guryanov, A. V. Kasimtsev, T. A. Sviridova, D. O. Moskovskikh, D. V. Permyakova, E. V. Evstratov, V. A. Imideev and S. S. Goncharov p. 402 abstract

General Purpose Materials

Compressibility of Composite Materials Based on Fibrous Fillers of Various Compositions

T. A. Pereverzeva, E. Yu. Efremova, N. V. Chernousova and A. V. Dedov p. 414 abstract

The Influence of Multigraphene on the Durability of Hard Alloy Inserts

S. A. Eremin, V. N. Anikin, D. V. Rudenko, A. M. Kolesnikova, Y. V. Sobolev, V. V. Kuzin, M. Y. Fedorov and N. A. Revyakina p. 420 abstract

Analysis of Hardening Mechanisms of Rail Steel under Plastic Deformation by Uniaxial Compression

K. V. Aksenova, V. E. Gromov, E. S. Vashchuk and Yu. F. Ivanov p. 426 abstract

Electrocatalytic Activity of a Composite Based on η-Niobium Carbide in Hydrogen Evolution Reaction

M. A. Eryomina, N. V. Lyalina, S. F. Lomayeva and I. K. Averkiev p. 432 abstract

Heterometallic (Nickel, Titanium)-Containing Dimethylglyoximates as Precursors for Nickel Titanate Coating

I. V. Fadeeva, O. V. Prokopova, E. V. Volchkova, V. A. Volchenkova, V. B. Smirnova, F. F. Murzakhanov and S. P. Yuschenko p. 443 abstract

The Effect of Heat Treatment and Tungsten Content on the Structure, Phase Composition, and Corrosion Resistance of High-Entropy Alloys of the Fe–Cr–Ni–Mo–W System

A. Yu. Ivannikov, M. A. Kudashev, Yu. A. Puchkov, S. D. Karpukhin, R. M. Nazarkin, S. V. Konushkin, M. A. Kaplan and V. A. Zelensky p. 451 abstract

Properties of Composites Based on Isotactic Polypropylene with Nickel-Containing Nanofillers

N. I. Kurbanova, C. K. Ragimova, T. M. Guliyeva and E. G. Isgandarova p. 457 abstract

Magnetic Properties of Glasses Synthesized from Rocks of Various Geneses

E. S. Sergienko, P. V. Kharitonskii and A. Yu. Ralin p. 461 abstract

Physical and Mechanical Properties of Ceramics Based on Si₃N₄ of Various Dispersion with 3% Y₂O₃–Al₂O₃

P. V. Andreev, P. D. Drozhilkin, L. S. Alekseeva, K. E. Smetanina, G. V. Scherbak, A. A. Popov and M. S. Boldin p. 470 abstract

Synthesis and Magnetic Hysteresis Properties of an Aluminum-Doped Isotropic Hard-Magnetic Fe–Cr–Co Powder Alloy

A. S. Ustyukhin, V. A. Zelensky, I. M. Milyaev, M. I. Alymov, A. A. Ashmarin, A. B. Ankudinov and K. V. Sergienko p. 480 abstract

Features of the Grain-Subgrain Structure of Ti_49.8Ni_50.2 Alloy after Megaplastic Deformation by abc Pressing and Subsequent Annealing

K. V. Krukovskii, A. I. Lotkov, V. N. Grishkov, A. A. Gusarenko and D. I. Bobrov p. 489 abstract

New Technologies for Obtaining and Processing Materials

The Study of the Content of Oxygen and Nitrogen in Nickel-Based Plasma Coatings

V. I. Kalita, D. I. Komlev, A. A. Radyuk, V. F. Shamraj, A. B. Mikhajlova and B. A. Rumyancev p. 498 abstract

Synthesis of Coatings Based on Graphene-Like Materials and Study of Their Physicochemical Properties

D. V. Belov, S. N. Belyaev, D. B. Radishchev and A. I. Okhapkin p. 506 abstract

Structural Changes in Hydroxyapatite Plasma Coatings Depending on the Plasma Power

V. F. Shamray, V. I. Kalita, V. P. Sirotinkin, D. I. Komlev, A. S. Gordeev, A. A. Radyuk, K. Yu. Demin and V. S. Komlev p. 523 abstract

Structure and Properties of WC–Cu Layered Composites Obtained under Vibration Conditions

L. E. Bodrova, E. Yu. Goyda, A. B. Shubin and O. A. Korolev p. 531 abstract

Study of the Influence of Organic and Modifying Additives on the Technological Properties of G13 Powder Steel

Zh. V. Eremeeva and Y. S. Ter-Vaganyants p. 539 abstract

Modification of Polyvinyltrimethylsilane Films by a 40 kHz Glow Discharge Plasma

A. V. Zinoviev, M. S. Piskarev, A. B. Gilman, E. A. Skryleva, B. R. Senatulin, A. K. Gatin, D. A. Syrtsova, V. V. Teplyakov and A. A. Kuznetsov p. 545 abstract

Processing of Tungsten Nanopowder into a Micropowder Consisting of Spherical Particles

A. V. Samokhin, A. A. Fadeev, N. V. Alekseev, A. A. Dorofeev, Yu. P. Kalashnikov, M. A. Sinaisky and I. D. Zavertyaev p. 553 abstract

Experimental Determination of the Effective Filament Embedding Length for Composites Manufactured Using Additive Technologies

D. D. Vlasov, T. P. Plugatar, A. E. Polyakov and N. A. Tatus p. 562 abstract

Methods of Study of Properties of Materials

Laser–Ultrasonic Study of Local Porosity Distribution in Carbon Fiber Reinforced Plastic Stringer Panels

Yu. G. Sokolovskaya, N. B. Podymova and A. A. Karabutov p. 568 abstract

Composition of Impurities of Germanium Tetrafluoride: A Gas Chromatography–Mass Spectrometry Study

T. G. Sorochkina, A. D. Bulanov, A. Yu. Sozin and O. Yu. Chernova p. 577 abstract

Maximum Gas Pressure in Pores

M. I. Alymov, A. B. Ankudinov, S. I. Averin, V. A. Zelenskii and F. F. Galiev p. 582 abstract

Identification of Impurities in Diborane by Gas Chromatography–Mass Spectrometry

A. Yu. Sozin, O. Yu. Chernova and T. G. Sorochkina p. 586 abstract

Errata

Erratum to: Physicochemical Properties and Functional Characteristics of a Tungsten-Free Hard Alloy in the TiC–TiNi System after Ion-Beam Treatment

A. M. Badamshin, S. N. Nesov, S. N. Povoroznyuk, V. V. Akimov, D. A. Polonyankin, A. A. Krutko, E. A. Rogachev, E. V. Knyazev and O. Yu. Burgonova p. 590 abstract

Contents