Vol. 11, No. 2, 2020
Study of the Optical and Luminescent Properties of Carbon Nanoparticles Using the Microphotoluminescence Method
p. 243 abstract
Magnetoelectric Multilayer Gallium Arsenide–Nickel–Tin–Nickel Structures
p. 257 abstract
Kinetic Analysis of Vapor Transfer of Silicon by Zinc Sulfide
p. 264 abstract
Formation of New Intermetallic Phases in the Ta–Ni–Al System
p. 271 abstract
Heat-Resistant RuAl-Based Alloys: Part I. Cast Alloys
p. 277 abstract
Potential and Capabilities of Porous Silicon as a Material for Intravascular Drug-Eluting Stents: Brief Summary
p. 287 abstract
High-Temperature Cermet Material Based on Intermetallic Nickel Matrix
p. 297 abstract
Physicomechanical Characteristics of Composite Based on Polyimide Matrix Filled with Tungsten Oxide
p. 304 abstract
Modeling of the Mass Loss of Polymer Material under Electronic Irradiation in Vacuum
p. 312 abstract
Investigation of Structural and Optical Homogeneity of LiNbO3:ZnO Crystals of Different Genesis
p. 320 abstract
Peculiarities of Estimating the Optical Band Gap of Thin Films of Phase Change Memory Materials
p. 330 abstract
Effect of Photon Treatment on Structure and Substructure of Bi2Te3 – xSex Thermoelectric Material
p. 338 abstract
Investigation of Stainless Steel Obtained by Additive Technology as Applied to the Operating Conditions of Liquid Metal Heat-Exchange Systems
p. 343 abstract
Specifics of Damageability of the Silicon Single Crystal under Exposure of Powerful Plasma Streams and Fast Helium Ions
p. 349 abstract
Study of the Microscopic Origins of Radiation Hardening of Ferritic-Martensitic Steels RUSFER-EK-181 and ChS-139 in the Simulation Experiment with Heavy Ion Irradiation
p. 359 abstract
Release Kinetics of Doxycycline Encapsulated in Polylactoglycolide Scaffolds Using Supercritical Carbon Dioxide
p. 366 abstract
Preparation of Hybrid Nanocomposites Based on Nanoscale Cellulose and Magnetic Nanoparticles with Photocatalytic Properties
p. 371 abstract
Polylactic Acid Thin Films Properties after Steam Sterilization
p. 377 abstract
Optimization of Conditions for Synthesis of Ultrafine Silver Particles in Hemp Fiber Extract
p. 385 abstract
Reaction Sintering of Bioceramic Based on Substituted Calcium Phosphates CaMPO4 (M = K, Na)
p. 394 abstract
The Influence of Carbonyl Iron Powder, Grade VK, on Compactability and Strength Properties of Sintered Atomized Iron Powder, Grade PZhRV 2.200.26
p. 403 abstract
Effect of Matrix on Properties of Cermet Plasma Coatings Based on Titanium Carbide
p. 408 abstract
Electrophysical Characteristics of Epoxy Nanocomposites with Ultralow Percolation Thresholds
p. 416 abstract
Physical and Mechanical Properties of Pyro-Compacted Carbon-Carbon Material on a Fabric Warp
p. 420 abstract
Conductive Material Based on Copper Powder with Improved Mechanical Properties
p. 424 abstract
Rheological Properties of Composites Based on Aluminum Hydroxide and Low- and High-Density Polyethylene Blends
p. 429 abstract
Effect of Iron Doping on Structural, Magnetic, and Electrical Characteristics of Manganites in La0.7Sr0.3Mn0.9Zn0.1 – xFexO3 (0 ≤ x ≤ 0.1) System
p. 435 abstract
Synthesis and Sensor Characteristics of Nanoscale Thin Films in the In2O3–SnO2 and Y2O3–TbOx(CeOx) Systems
p. 441 abstract
Influence of Explosive Welding Parameters on the Structure of Interface in Brass–Invar Thermobimetal
p. 448 abstract
Study of Structure and Mechanical Properties of Long-Length Metalware from D19 Alloy Produced by Continuous Casting and Deformation of Metal in Solid-Liquid State
p. 453 abstract
Surface Physicochemical Treatment of Nickel Foam for Increasing Its Electrocatalytic Activity in Overall Water Splitting
p. 458 abstract
Synthesis and Evaluation of Adsorption Properties of Reduced Graphene Oxide Hydro- and Aerogels Modified by Iron Oxide Nanoparticles
p. 467 abstract
Formation of Superhydrophobic Coatings on the Track-Etched Membrane Surface by the Method of Electron-Beam Deposition of Polymers in Vacuum
p. 476 abstract
Preparation of Silicon Nitride and Oxonitride by Gas-Phase Pyrolysis of Hexamethyldisilazane
p. 488 abstract
Synthesis of Arc-Resistant W70Cu30 Composite Alloy with Frameless Placing of Thin-Dispersed Tungsten Phase
p. 495 abstract