Vol. 10, No. 2, 2019

Inorganic Materials: Applied Research

Physicochemical Principles of Creating Materials and Technologies

Modern Methods for Synthesis of Few-Layer Graphene Structures by Electrochemical Exfoliation of Graphite

E. S. Bakunin, E. Yu. Obraztsova and A. V. Rukhov p. 249 abstract

Calculation of Third-Order Elastic Constants of the Crystals of a TiNi-Based Alloy with Shape Memory

S. A. Muslov and A. I. Lotkov p. 256 abstract

Evolution of the Al₈₅Ni₅Fe₇La₃ Amorphous Alloy Structure under Flash Lamp Annealing

N. D. Bakhteeva, A. L. Vasiliev, S. V. Kannykin, N. N. Kolobylina and E. V. Todorova p. 260 abstract

Synthesis and Study of New Luminescent Carbon Particles with High Emission Quantum Yield

S. A. Kazaryan, V. N. Nevolin and N. F. Starodubtsev p. 271 abstract

Thermophysical Properties of Powder-Polymer Mixture for Fabrication of Parts of 42CrMo4 Steel by the MIM Method

A. N. Muranov, A. B. Semenov, P. S. Marakhovskii, E. Yu. Chutskova and B. I. Semenov p. 285 abstract

Calculation of Filament Volume Fraction in Dry Roving and Constants of Parameters of Composites Made of Unidirectional Fibers

V. I. Mamonov p. 291 abstract

Receiving the Recipe of the Compositions Based on UHMWPE with the Assigned Properties

S. V. Panin, N. Yu. Grishaeva, P. A. Lyukshin, B. A. Lyukshin, I. L. Panov, S. A. Bochkareva, N. Yu. Matolygina and V. O. Alexenko p. 299 abstract

Magnetic Nanodispersed Lubricants Based on Organosilicon Liquids

A. N. Bolotov and O. O. Novikova p. 305 abstract

Materials for Aerospace Technology

Effect of Chemical Composition Variability on Phase Composition and Structure of Beta-Solidifying TiAl-Alloy in As-Cast Condition

P. V. Panin, N. A. Nochovnaya, E. A. Lukina and A. S. Kochetkov p. 316 abstract

Materials for Electronics

Epitaxial Growth of Iron and Indium Oxide Thin Films on Sapphire R-Plane with a Regular Relief

A. E. Muslimov and V. M. Kanevski p. 322 abstract

Materials of Power Engineering and Radiation-Resistant Materials

Behavior of Capillary-Porous Systems with Liquid Lithium under Influence of Pulsed Deuterium Plasma

A. V. Vertkov, A. V. Voronin, V. K. Gusev, E. V. Demina, I. E. Lyublinskiy, V. N. Pimenov and M. D. Prusakova p. 326 abstract

Study of Microscopic Origins of Radiation Hardening of Eurofer 97 in Simulation Experiment with Ion Irradiation

S. V. Rogozhkin, A. A. Nikitin, A. A. Khomich, N. A. Iskandarov, V. V. Khoroshilov, A. A. Bogachev, A. A. Lukyanchuk, O. A. Raznitsyn, A. S. Shutov, T. V. Kulevoy, P. A. Fedin, A. L. Vasiliev and M. Yu. Presnyakov p. 333 abstract

Damageability of the Al₂O₃ Oxide Coating on the Aluminum Substrate by Pulsed Beam Plasma and Laser Radiation

V. A. Gribkov, A. S. Demin, N. A. Epifanov, E. E. Kazilin, S. V. Latyshev, S. A. Maslyaev, E. V. Morozov, I. P. Sasinovskaya, V. P. Sirotinkin, K. N. Minkov and M. Paduch p. 339 abstract

Materials for Human Life Support and Environmental Protection

Improvement of Functional Properties of Medical Stainless Steel Surface by Treatment with Helium, Argon, and Silver Ions

I. V. Perinskaya, I. V. Rodionov and L. E. Kuts p. 347 abstract

Investigation of Brushite Cement Based on α-Tricalcium Phosphate and Its Composite with Polylactic Framework

A. V. Knotko, P. V. Evdokimov, I. V. Fadeyeva, A. S. Fomin, S. M. Barinov, V. A. Volchenkova and A. A. Fomina p. 354 abstract

Structure and Properties of Gas-Filled Biocomposites on the Basis of Polyethylene

E. A. Grigoreva, N. N. Kolesnikova, A. A. Popov and A. A. Olkhov p. 358 abstract

Composite Porous Tubular Biopolymer Matrix of Small Diameter

E. A. Nemets, V. Yu. Belov, T. S. Ilina, V. A. Surguchenko, A. P. Pankina and V. I. Sevastianov p. 365 abstract

Effects of Synthesis Method and Stabilizing Agent Trehalose on Functional Properties of Protein Composites with Colloidal Silica

E. S. Dolinina and E. V. Parfenyuk p. 373 abstract

General Purpose Materials

Thermoelastoplastics Based on a Mixture of Thermoplastic Polyolefins and Butyl Rubber

Z. N. Guseynova, N. T. Kakhramanov, B. A. Mamedov, V. S. Osipchik and U. M. Mammadli p. 381 abstract

The Magnetic Properties of a Magnetically Soft Composite Material for Use in the Low-Frequency Range

G. A. Govor and A. O. Larin p. 387 abstract

Curing of ED-20 Epoxy Resin with Diesterdisulfoanhydride of 2-Hydroxypropyl Saccharin-6-Carboxylic Acid

E. T. Aslanova, T. A. Aslanov, B. A. Mamedov and A. A. Mamedova p. 391 abstract

Effect of Zinc Molybdate on the Fire-Resistant and Physicomechanical Properties of PVC Plastic

T. A. Borukaev and Z. T. Alakaeva p. 396 abstract

Cermet Plasma TiC–Cr₃C₂–NiCr–Mo–C Coatings

V. I. Kalita, A. A. Radyuk, D. I. Komlev, A. Yu. Ivannikov, A. B. Mikhailova and A. V. Alpatov p. 402 abstract

Metal-Containing Nanocomposites on the Basis of Isotactic Polypropylene

N. I. Kurbanova, N. A. Alimirzoyeva, A. M. Kuliyev, Z. N. Guseinova and N. Ya. Ishchenko p. 411 abstract

Effect of Sintering Parameters on the Phase Composition of Ceramic Based on Aluminum Oxynitride

A. G. Kolmakov, D. V. Prosvirnin, M. D. Larionov, A. S. Alikhanyan, M. E. Prutskov and S. V. Pivovarchik p. 416 abstract

New Technologies of Preparation and Treatment of Materials

Combined Influence of Severe Plastic Deformation and Cold Rolling on Mechanical Properties of Al–Mg₂Si Alloys

N. R. Bochvar, L. L. Rokhlin and I. E. Tarytina p. 420 abstract

Effect of Temperature on Annealing Products of Synthesized Opal Matrices

A. A. Dyshin, O. V. Eliseeva, G. V. Bondarenko and M. G. Kiselev p. 425 abstract

Synthesis of the Materials with a Switchable Wettability Based on Photosensitive Terpolymers Containing Poly(Titanium Oxide)

O. A. Ryabkova, E. V. Salomatina, A. V. Knyazev and L. A. Smirnova p. 431 abstract

Surface Modification of Corundum Ceramics by Argon Ion Beam

S. A. Ghyngazov, V. Kostenko, V. V. Ovchinnikov, N. V. Gushchina and F. F. Makhinko p. 438 abstract

Plasma-Chemical Modification of Facing Composite Material on the Basis of Hollow Glass Microspheres with Decorative Protective Coating

D. O. Bondarenko, V. V. Strokova, T. I. Timoshenko and I. V. Rozdol’skaya p. 445 abstract

Creation of Highly Porous Material with a Hierarchical Structure by Sintering of Nickel Nanopowder Using Ammonium Bicarbonate as Space Holder

A. G. Gnedovets, A. B. Ankudinov, V. A. Zelenskii and M. I. Alymov p. 451 abstract

Gradient Absorber of Electromagnetic Waves

K. L. Devin, A. N. Borcov and E. A. Devina p. 459 abstract

Conditions for Obtaining “Thick” Amorphous Wires by the Ulitovsky–Taylor Method

V. V. Molokanov, A. N. Shalygin, P. P. Umnov, T. R. Chueva, N. V. Umnova and S. V. Simakov p. 463 abstract

Application of Low-Temperature Postradiation Polymerization of Polytetrafluoroethylene for Hydrophobization of Porous Ceramic Materials Based on Oxide Fibers

D. P. Kiryukhin, A. S. Bespalov, V. M. Bouznik, D. V. Grashchenkov, V. K. Ivanov, I. A. Zvereva, G. A. Kichigina and P. P. Kushch p. 467 abstract

SHS Metallurgy of Binary Silicides (MoW)Si₂ for Sintering Composite Materials

V. A. Gorshkov, P. A. Miloserdov, D. D. Titov, V. I. Yukhvid and Yu. F. Kargin p. 473 abstract

Formation the Properties of Carbon Black Particles by Gas-Phase Thermochemical Modification

Yu. V. Surovikin, A. G. Shaitanov, I. V. Rezanov and A. V. Syrieva p. 480 abstract

Copper Smelter Dust Is a Promising Material for the Recovery of Nonferrous Metals by the Waelz Process

P. I. Grudinsky, V. G. Dyubanov and P. A. Kozlov p. 496 abstract

Contents