Vol. 9, No. 2, 2018
A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Inorganic Materials: Applied Research ISSN 2075-1133.
Theoretical and Experimental Research of Luminescent Properties of Nanoparticles
p. 151 abstract
Formation of Diode-Like Composite Membranes by Plasma Polymerization
p. 162 abstract
Properties and Potential Applications of Quasi-Two-Dimensional Molybdenum Disulfide for Nanoelectronic Elements
p. 175 abstract
Composite Materials Obtained via Two-Nozzle Electrospinning from Polycarbonate and Vinylidene Fluoride/Tetrafluoroethylene Copolymer
p. 184 abstract
Characteristic Features of Physical and Mechanical Properties of Ultrafine-Grained Al–Mg Alloy 1560
p. 192 abstract
Studies of the Microstructure and Physical and Mechanical Properties of Layered Metal Composite Materials Based on a Molybdenum Matrix
p. 197 abstract
Properties of La–Sr Manganites with Combined Substitution of Different Valence Ions for Strontium and Manganese
p. 201 abstract
Specific Features of the Growth, Structure, and Main Physicochemical Properties of FeGa2Se4 Single Crystals
p. 207 abstract
Fatigue Strength of Ferrite-Martensite 12% Chromium Steels EK-181, EP-823 and Vanadium Alloy V–4Ti–4Cr
p. 212 abstract
Synthesis of Stable Bismuth Silicate with Sillenite Structure in the Na2O–Bi2O3–SiO2 System
p. 221 abstract
Effect of Deuterium Plasma Irradiation on V–Ga Alloys
p. 227 abstract
Study of Nanostructure of Ferritic-Martensitic Steel ChS-139 in Initial State and after Fe Ion Irradiation
p. 231 abstract
M/Gd0.1Ti0.1Zr0.1Ce0.7O2 Catalysts Where M Is Pt, Pd, or Pt–Pd in CO Oxidation
p. 239 abstract
Hyperbranched Functionalized Polyesters for the Creation of Promising Chemically Modified Sorbents
p. 243 abstract
Antimicrobial Properties of Polyester Fabric Modified by Nanosized Titanium Dioxide
p. 250 abstract
Influence of Rare Earth Elements on the Structural-Phase State of Mo–Si–X (X = Sc, Y, Nd) in situ Composites
p. 257 abstract
Variation of Contents of Carbon, Nitrogen, and Oxygen upon Formation of Plasma Cermet Coatings with Steel Matrix Reinforced with Titanium Carbide
p. 264 abstract
Influence of Carbon Nanotubes on Mechanical Properties of Cast Aluminum, Grade A5
p. 270 abstract
Effect of Copper Content on the Structure and Phase Transformations in Melt-Spun TiNi–TiCu Alloys
p. 279 abstract
Formation of Structure and Closed Porosity under High-Temperature Firing of Granules of Porous Glass-Ceramic Material
p. 286 abstract
Mechanochemical Synthesis of Dy2TiO5 Single-Phase Crystalline Nanopowders and Investigation of Their Properties
p. 291 abstract
Application of Pulsed Laser Deposition in Reactive Gaseous Media to Fabricate an Effective Hybrid MoSx/WOy Catalyst for the Reaction of Hydrogen Evolution
p. 297 abstract
Synthesis of Composites from Functionalized Carbon Nanotubes and Polyaniline
p. 305 abstract
Optimization of Liquid-Phase Method of Synthesis of Cu–W Alloys
p. 311 abstract
Properties of Composite Electrolytic Coating Nickel–Cobalt–Aluminum Oxide–Fluoroplastic
p. 317 abstract
Study of Phase Composition of CuO/Cu2O Nanoparticles Produced in the Plasma of a Low-Pressure Arc Discharge
p. 323 abstract
Combustion Synthesis of Membranes for Steam Reforming of Dimethyl Ether
p. 329 abstract
Structural Organization of Magnetic Fluids Stabilized with Fatty Acids
p. 334 abstract
Influence of Mechanical Treatment on Consolidation Processes of Ultradisperse Powders of Stabilized Zirconium Oxide
p. 343 abstract
Reverse Schemes of Explosive Cladding of Long-Length Pipe Billets
p. 347 abstract
Creation of Ceramic Composites by High Temperature Oxidation of Iron and Nickel Alloys Using Oxidative Constructing Approach
p. 351 abstract