Vol. 8, No. 2, 2017

Inorganic Materials: Applied Research

Vol. 8, No. 2, 2017

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Inorganic Materials: Applied Research ISSN 2075-1133.

Physicochemical Principles of Design of Materials and Technologies

Pulsed Laser Deposition and Characterization of Nanostructured Thin Films Based on Mo(Ni)Se_x and Amorphous Carbon Phase as Electrocatalysts for Hydrogen Evolution Reaction

V. N. Nevolin, S. N. Grigoriev, R. I. Romanov, D. V. Fominski, M. A. Volosova, A. A. Soloviev and A. A. Burmistrov p. 195 abstract

Intensification of Processes of Electrodeposition of Metals by Use of Various Modes of Pulse Electrolysis

S. Yu. Kireev p. 203 abstract

Materials of Aeronautic and Space Engineering

Laminated Metal-Polymeric Materials in Structural Elements of Aircraft

N. Yu. Podzhivotov, E. N. Kablov, V. V. Antipov, V. S. Erasov, N. Yu. Serebrennikova, M. R. Abdullin and M. V. Limonin p. 211 abstract

Numerical Simulation of Metrological Characteristics of Cosmic Radiation Detectors

I. A. Zolotarev, L. S. Novikov, V. I. Osedlo, V. I. Tulupov and N. P. Chirskaya p. 222 abstract

Materials for Electronics Technology

Comparison of the Basic Physical and Chemical Properties of Complex Oxides LiNi_xMn_yCo_{1 –} _x _– _yO₂ (0.3 ≤ x ≤ 0.6; 0.2 ≤ y ≤ 0.4) Obtained by Different Methods

V. A. Voronov, A. O. Shvetsov, S. P. Gubin, A. V. Cheglakov, D. Yu. Kornilov, A. S. Karaseva, E. S. Krasnova and S. V. Tkachev p. 229 abstract

Preparation of the Li_1.5Al_0.5Ge_1.5(PO₄)₃ Solid Electrolyte with High Ionic Conductivity

G. B. Kunshina, I. V. Bocharova and V. I. Ivanenko p. 238 abstract

Obtaining and Electrical Properties of Ceramics Based on Mixed Niobium and Tantalum Pentoxide Nb_{2(1 –} _y)Ta_2yO₅

M. N. Palatnikov, V. V. Efremov and N. V. Sidorov p. 245 abstract

Materials of Power Engineering and RadiationResistant Materials

Composite Materials Based on Oxides of d and f Elements and Carbon Layers

M. V. Kalinina, L. V. Morozova, T. L. Egorova, M. Yu. Arsentyev, I. I. Khlamov, P. A. Tikhonov and O. A. Shilova p. 254 abstract

Effect of Oxygen Impurity in Sodium–Potassium Melt on the Corrosion Processes at the Interface between Vanadium Alloy and Eutectic Melt

V. P. Krasin, I. E. Lyublinski, S. I. Sojustova and V. V. Semenov p. 260 abstract

Structural Transformations in Al₈₅Ni₇Fe₄La₄ Alloy under Carbon Ion Irradiation

N. D. Bakhteyeva, A. L. Vasilyev, A. G. Ivanova, N. N. Kolobylina, Ye. V. Todorova, A. I. Ryazanov, S. T. Latushkin and V. N. Unezhev p. 268 abstract

Attenuation of Photon and Neutron Radiation Using Iron–Magnetite–Serpentinite Radiation-Protective Composite

R. N. Yastrebinskii, G. G. Bondarenko and V. I. Pavlenko p. 275 abstract

Microstructure of Ti–5Al–4V–2Zr Alloy in the Initial Condition and after Irradiation with Titanium Ions

S. V. Rogozhkin, A. A. Nikitin, N. N. Orlov, T. V. Kulevoy, P. A. Fedin, O. A. Korchuganova, M. A. Kozodaev, A. L. Vasiliev, A. S. Orekhov, N. N. Kolobylina, V. P. Leonov and I. A. Schastlivaya p. 279 abstract

Materials for Support of Human Activity and Environmental Protection

Thermal Extrusion Three-Dimensional Printing of Copolymer Polyethylene Glycol and Poly-ε-Caprolactone Matrix Structures

D. S. P. Jang, J. Y. Jeng, A. G. Dunaev, L. I. Krotova, A. V. Mironov, O. A. Mironova, V. K. Popov and Y.-Y. Chen p. 286 abstract

Brushite Cement Based on β-TCP for Orthopedics

A. S. Fomin, I. V. Fadeeva, Ya. Yu. Filippov, V. K. Kovalkov, M. A. Grigoryeva, L. I. Shvorneva and S. M. Barinov p. 292 abstract

The Shear Strength of Ti–HA Composite Coatings for Intraosseous Implants

V. I. Kalita, D. I. Komlev, A. Yu. Ivannikov, A. A. Radyuk, V. S. Komlev, V. I. Mamonov, M. A. Sevast’ianov and A. S. Baikin p. 296 abstract

General Purpose Materials

Adhesive Properties of Carbon 1D Nanostructures in Elastomeric Composition

I. A. Mansurova, O. Yu. Isupova, E. A. Durnev, K. E. Gavrilov and A. A. Burkov p. 305 abstract

Phase Composition and Defect Substructure of Double Surfacing, Formed with V–Cr–Nb–W Powder Wire on Steel

S. V. Konovalov, V. E. Kormyshev, V. E. Gromov, Yu. F. Ivanov and E. V. Kapralov p. 313 abstract

Kinetic Analysis of the Oxidation of Nb–Si Eutectic Alloy Doped with Boron

A. N. Mansurova, R. I. Gulyaeva and V. M. Chumarev p. 318 abstract

Atomic Structure of Gold Nanoparticles Stabilized in Polyethylene

A.V. Kozinkin, S. S. Podsukhina, V. G. Vlasenko, G. Yu. Yurkov, N. A. Taratanov, M. I. Biryukova and Yu. V. Zubavichus p. 327 abstract

New Methods of Production and Treatment of Materials

Structure and Properties of Steel Produced by Metal Injection Molding

Y. V. Myachin, E. A. Darenskaya, O. Y. Vaulina, S. P. Buyakova, I. V. Turuntaev and S. N. Kulkov p. 331 abstract

Production of Antifriction Composite Filler Rods Based on Babbit B83 by Extrusion

I. E. Kalashnikov, L. K. Bolotova, I. V. Katin, L. I. Kobeleva, A. G. Kolmakov, R. S. Mikheev and N. V. Kobernik p. 335 abstract

Shock-Wave Treatment of Tungsten/Fluoropolymer Powder Compositions

M. I. Alymov, S. G. Vadchenko, I. V. Saikov and I. D. Kovalev p. 340 abstract

High-Temperature Oxidation of Nickel Using Oxidative Constructing Approach

V. Yu. Zufman, S. V. Shevtsov, A. I. Ogarkov, I. A. Kovalev, K. B. Kuznetsov, A. A. Ashmarin, N. A. Ovsyannikov, N. N. Dergunova, S. K. Rodionova, A. S. Chernyavskii and K. A. Solntsev p. 344 abstract

Influence of Heat Treatment Parameters on the Structure and Mechanical Properties of a Titanium VT6 Alloy in the Submicrocrystalline State

I. V. Ratochka and O. N. Lykova p. 348 abstract

Contents