Contents

Inorganic Materials: Applied Research

Vol. 17, No. 1, 2026

Wear Resistance and Anticorrosion Properties of Composite Gas-Thermal Coatings Based on Systems (Ti–Al)–(Fe–Cr) and (Ti–Al)–(Fe–Cr–Ni–Mo)

A. N. Grigorchik and V. A. Kukareko p. 1  abstract

Investigation of the Effect of Iron Stearate on the Processing and Physical Properties of Powder Alloyed Steel SP40KhSMF

Zh. V. Eremeeva and Yu. S. Ter-Vaganyants p. 8  abstract

Formation of Ti5(Al, Si)3 Hexagonal Crystals in the Process of Self-Propagating High-Temperature Synthesis in Ti–Al–SiO2 System

A. E. Sytschev, M. L. Busurina, P. A. Lazarev, O. D. Boyarchenko, O. V. Belousova, and I. D. Kovalev p. 13  abstract

Investigation of Tribotechnical Characteristics of Duplex Steel VNS32-VI after Various Vacuum Carburizing Modes

G. S. Sevalnyov, S. S. Girilovich, D. S. Kopylova, E. V. Zinovyeva, A. A. Gavrilova, and A. G. Kolmakov p. 21  abstract

Evolution of Structure and Phase Composition of Overlaid Layer under Heat Treatment Conditions

Yu. F. Ivanov, V. E. Gromov, A. B. Yuryev, S. S. Minenko, A. S. Chapaykin, I. Yu. Litovchenko, and A. P. Semin p. 28  abstract

Realization of Effect of Hydrochemical Dispersion of Materials

A. A. Shmatov, L. Soos, and Z. Krajny p. 35  abstract

Shear Modulus and Internal Friction in Multilayer Metal Composites

E. L. Kolyvanov and V. P. Korzhov p. 41  abstract

Composite Materials Based on Polytetrafluoroethylene and Aluminum Oxide Produced by Explosive Pressing

N. A. Adamenko, G. V. Agafonova, L. Yu. Drobot, D. E. Efremov, and A. S. Chistyakov p. 48  abstract

Influence of Synthetic Wollastonite with Different Particle Morphologies on Formation of Friction Surface of UHMWPE-Based Composites

S. N. Danilova, S. B. Yarusova, A. A. Okhlopkova, P. S. Gordienko, and I. G. Zhevtun p. 55  abstract

Influence of Temperature on Solid-Phase Synthesis of CaCu3Ti4O12

S. G. Ponomarev, A. N. Khrustalev, I. D. Akinshin, L. A. Arbanas, and V. E. Bazarova p. 64  abstract

Mechanical Properties and Structure of Welded Joints of Al–Ca–Mg Aluminum Alloy Sheets Made by Argon Arc Welding

V. V. Ovchinnikov, E. O. Protsenko, and Ya. M. Klochkov p. 69  abstract

Effect of Study of Phase Composition of Zirconium Dioxide Nanoparticles Deposited by Low-Pressure Arc Discharge on Photoluminescence Properties

L. Yu. Fedorov and I. V. Karpov p. 76  abstract

Physical and Mechanical Properties of Crystal Structures from the Human Gallbladder

N. V. Nevmerzhitskiy, M. L. Rogal, P. A. Yartsev, Yu. S. Teterin, A. V. Kalmanov, T. V. Korshunova, O. Yu. Kascheeva, E. A. Pazhina, and V. A. Khokhlov p. 82  abstract

Compressive Strength of Composite Ice Containing Cellulose Nanoparticles at Different Strain Rates and Temperatures

V. V. Rodaev, V. M. Vasyukov, S. S. Razlivalova, A. A. Samodurov, A. I. Tyurin, Yu. I. Golovin, and V. M. Buznik p. 90  abstract

On the Influence of Dynamic Conditions on Corrosion Destruction of Pipe Steels during Operation of Gas Pipelines in Carbon Dioxide Environments

R. K. Vagapov and K. A. Ibatullin p. 94  abstract

Electroplastic Effect in Aluminum and Its Alloys

M. A. Pakhomov p. 103  abstract

Structure and Properties of the Surface Layer Obtained by Plasma Surfacing from High-Entropy Molybdenum High-Speed Steel after Complex Processing

Yu. F. Ivanov, V. E. Gromov, S. S. Minenko, T. P. Guseva, A. S. Chapaykin, and A. P. Semin p. 112  abstract

Effect of Fillers on Physical, Mechanical, Performance, and Dynamic Properties of Rubber for Pads of Rail Fastenings

E. N. Egorov and N. I. Kol’tsov p. 120  abstract

Thermal and Dielectric Properties of Elastomeric Silicone-Based Films Filled with Hexagonal Boron Nitride

N. S. Romanov, E. A. Danilov, E. M. Gurova, E. A. Grishukhina, and V. M. Samoilov p. 127  abstract

Structure and Properties of Zn–0.8Li–0.1Mn Alloy after Various Types of Thermomechanical Processing

O. B. Kulyasova, A. R. Sirazeeva, A. R. Khasanova, D. A. Aksenov, R. N. Asfandiyarov, B. O. Bolshakov, and D. V. Gunderov p. 136  abstract

Influence of Acid-Base Properties of Ionic Melts of Multicomponent Systems on Processes of Chemical Synthesis of Tungsten Oxide Bronzes

Zh. A. Kochkarov p. 142  abstract

Magnetron Sputtering of Thin Copper Films to Increase Wear Resistance of Titanium Alloy VT6

M. A. Babuev and V. V. Ovchinnikov p. 148  abstract

Powder-Based Ceramics in System ZrO2–SnO2–TiO2 with Additives of La2O3 and ZnO

A. V. Zolottsev, V. V. Anisimov, and N. A. Makarov p. 154  abstract

Influence of Mechanoactivation of Graphite Nanoparticles on Electrical Conductivity and Physical and Mechanical Properties of Multifunctional Nanocomposites Based on Copolymers of Ethylene with α-Olefins

Kh. V. Allahverdiyeva and N. T. Kakhramanov p. 161  abstract

Construction of Maps of Selective Laser Melting Modes for Inconel 718 Nickel Alloy

A. V. Semenycheva, V. N. Chuvildeev, and S. V. Shotin p. 169  abstract

Study of Physical and Mechanical Properties and Microstructure of Wood Materials at Different Scale Levels

A. A. Samodurov, A. I. Tyurin, V. V. Korenkov, M. A. Yunak, V. V. Rodaev, V. A. Tyurin, and D. Yu. Golovin p. 177  abstract

Evaluation of Influence of Technological Parameters of DMD Printing of 12Kh18N10T Alloy Samples on Their Physical and Mechanical Characteristics and Parameters of Nondestructive Testing

A. A. Khlybov, D. A. Ryabov, A. A. Solovyov, and A. A. Shuyanova p. 184  abstract

Nuclear Magnetic Resonance Spectroscopy of Diamond Nanoparticles Produced by Grinding of Natural Diamond and Detonation Synthesis before and after Thermal Treatment

P. P. Sharin, S. P. Yakovleva, M. P. Akimova, and A. V. Sivtseva p. 194  abstract

Selecting the Initial Interval in the Kinetic Diagram Obtained through Assessing the Fatigue Fracture Growth Rate

A. M. Krupenin p. 201  abstract

Study of the Impact Toughness Values Scattering Mechanisms of Hot-Rolled Low-Carbon Low-Alloy Steel Based on the Results of Multiple Charpy Impact Tests

K. G. Vorkachev, V. A. Bozhenov, and K. A. Solntsev p. 209  abstract

On the Question of the Determination Accuracy of the Crystal Lattice Period of Deformed Metals and Solid Solutions by X-ray Diffractometry

V. P. Filippova, E. N. Blinova, N. A. Shurygina, and B. A. Kornienkov p. 215  abstract

Effect of Welding Method on Residual Stresses in Welded Joints Made of Aluminum Alloy 1565ch

A. M. Drits, V. V. Ovchinnikov, and R. B. Reztsov p. 222  abstract

Microstructure and Properties of FSW Butt Joints Made of Differently Combined 6082T6 and 1565chM Aluminum Alloys

A. M. Drits, V. V. Ovchinnikov, R. B. Reztsov, and V. A. Bakshaev p. 229  abstract

Friction Stir Spot Welding of Lap Joints of Stack of Thin Sheets Made of 1565chM Aluminum Alloy

V. V. Ovchinnikov, P. S. Dmitrashko, and V. N. Balashov p. 238  abstract

Retraction Note

Retraction Note: Mechanochemical Synthesis of Dy2TiO5 Single-Phase Crystalline Nanopowders and Investigation of Their Properties

J. V. Eremeeva, S. Vorotilo, D. Yu. Kovalev, A. A. Gofman, and V. Y. Lopatin p. 244  abstract