Vol. 13, No. 1, 2022

Inorganic Materials: Applied Research

Peculiarities of Structure Formation in Ni–C, Al–C, and Ni–Al–C Systems at High-Temperature Heating

S. G. Vadchenko, A. S. Shchukin, A. E. Sytschev and O. D. Boyarchenko p. 1 abstract

Model for Forecasting Temperature Dependence of γ/γ' Misfit in Heat-Resistant Nickel Alloys

A. I. Epishin, N. V. Petrushin, I. L. Svetlov and G. Noltse p. 7 abstract

The Influence of Microstructure of Imported Cultivator Duckfoot Tines on Selection of Their Recovery Method

A. M. Mikhal’chenkov, S. A. Fes’kov and A. A. Tyureva p. 17 abstract

Regularities of Change in Microhardness in the High Section of Fiberglass, Scratch Resistance by Indenter, and Formation of Texture of Sclerometric Grooves

E. A. Veshkin, V. V. Semenychev, V. I. Postnov and E. V. Krasheninnikova p. 21 abstract

Plasma-Chemical Synthesis of YBa₂Cu₃O_{7 – y}/CuO Granular Composites

I. V. Karpov, A. V. Ushakov, L. Yu. Fedorov, L. A. Irtyugo and E. A. Goncharova p. 29 abstract

Influence of Heat Treatment Modes on Performance Characteristics of Construction Products on the Basis of Dinas Refractory Scrap Binder

L. K. Berdnikova, V. A. Poluboyarov, Z. A. Korotaeva, F. K. Gorbunov and V. V. Bulgakov p. 35 abstract

High-Temperature Corrosion of a Nickel Alloy

V. Z. Poilov, A. L. Kazantsev, P. V. Skovorodnikov, D. V. Saulin, N. P. Uglev and A. I. Puzanov p. 39 abstract

Physicochemical Properties of New Semiconductor Materials—Solid Solutions of the InB^V–CdTe Systems

I. A. Kirovskaya, A. O. Ekkert, E. N. Kopylova, T. L. Bukashkina and R. V. Ekkert p. 44 abstract

The Evaluation of the Corrosion Properties of Steel Two-Layer Oil Well Tubing for Oil Extraction

E. L. Alekseeva, A. A. Al’khimenko, M. A. Kovalev, N. O. Shaposhnikov, M. L. Shishkova, N. A. Devyaterikova, A. D. Breki, A. G. Kolmakov, A. E. Gvozdev and S. N. Kutepov p. 52 abstract

Multidimensional Technological Optimization of Thermohydrochemical Treatment of Hard Alloy in Silver Graphite Hydrosol

A. A. Shmatov, L. Soos and Z. Krajny p. 59 abstract

Study of Structure Formation in Polytetrafluoroethylene Filled with Aluminum after Explosive Pressing

N. A. Adamenko, A. V. Kazurov, D. V. Savin and G. V. Agafonova p. 68 abstract

Ceramics Based on Powders Synthesized from Ammonium Hydrogen Phosphate, Calcium Acetate, and Magnesium Acetate

G. K. Kazakova, T. V. Safronova and T. B. Shatalova p. 75 abstract

Improving Corrosion Behavior of High-Grade Zinc by Aluminum Alloying

I. N. Ganiev, S. S. Sodikova, S. Dzh. Alikhonova and R. Kh. Saidzoda p. 83 abstract

The Study of the Structure and Properties of Pressed Strips Made of a V-1977 Ultrahigh-Strength Aluminum Alloy after Two-Step Aging

T. A. Nechaikina, A. V. Somov, A. L. Ivanov and O. Yu. Kozlova p. 88 abstract

Structure and Properties of Surfaced Intermetallic Alloys Based on Titanium

A. I. Kovtunov, A. G. Bochkarev and D. I. Plakhotnyi p. 94 abstract

Quantitative Estimation of Formation of Shrinkage Porosity by the Niyama Criterion

E. S. Ivanina, V. P. Monastyrskiy and M. Yu. Ershov p. 100 abstract

Plasma-Chemical Synthesis of Aluminum and Lead Silicate Glass Microspheres

V. S. Bessmertnyi, N. M. Zdorenko, O. V. Puchka, Yu. T. Platov, R. A. Platova and E. N. Chizhova p. 106 abstract

Permeability of Composition Fiber Materials

V. G. Nazarov and A. V. Dedov p. 111 abstract

Thermal Strain Properties of Metal-Polymer Composites Based on Low-Density Polyethylene and Copper

Kh. V. Allahverdieva, N. T. Kakhramanov, N. B. Arzumanova and S. R. Abdalova p. 116 abstract

Radar-Absorbent Polymer Composites Filled with Iron Powders of Different Morphology

I. D. Kraev, A. E. Sorokin, V. A. Govorov, A. A. Pykhtin and E. V. Filonova p. 121 abstract

Adhesive and Mechanical Properties of Biocompatible Oxynitride Coatings

E. L. Boytsova p. 129 abstract

Materials for Freezing Ice Objects

O. I. Smirnov, G. A. Nuzhnyi, O. A. Novoskol’tseva, A. A. Yaroslavov and V. M. Buznik p. 134 abstract

Study of the Process of Diffusion Alloying of Mixture for Powdered High Speed Steel

A. S. Akhmetov and Zh. V. Eremeeva p. 138 abstract

Radar-Absorbent Polymer Composites Filled with Magnetic Iron Powder and Carbon Nanotubes

I. D. Kraev, A. E. Sorokin, A. A. Pykhtin and E. V. Filonova p. 141 abstract

Analytical Review of Materials Science Characteristics of Hard Alloys and Their Field of Application

V. S. Panov and E. N. Avdeenko p. 150 abstract

Study of Mechanical Characteristics of Advanced Aluminum-Matrix Composites Reinforced with SiC and Al₂O₃

Yu. A. Kurganova, A. G. Kolmakov, Itszin’ Chen’ and S. V. Kurganov p. 157 abstract

Peculiarities of Solubility and Cytocompatibility In Vitro of Bone Cements on the Basis of Calcium Sulfate Containing Phosphate Ions

D. R. Khayrutdinova, M. A. Goldberg, P. A. Krokhicheva, O. S. Antonova, Yu. B. Tyut’kova, S. V. Smirnov, N. S. Sergeeva, I. K. Sviridova, V. A. Kirsanova, S. A. Akhmedova, S. M. Barinov and V. S. Komlev p. 161 abstract

Experimental Determination of Temperature Dependence of Structural–Phase Parameters of Nickel-Based Superalloy

I. A. Treninkov, N. V. Petrushin, A. I. Epishin, I. L. Svetlov, G. Nolze and E. S. Elyutin p. 171 abstract

Sliding Friction of 35 Grade Steel against BRAZh9-4 Grade Bronze in Lubricating Oil with Dispersed Magnesium Hydrosilicate

A. D. Breki, S. G. Chulkin, A. E. Gvozdev, A. G. Kolmakov, S. N. Kutepov and A. M. Kuz’min p. 179 abstract

Influence of Heat Treatment on the Structure and Properties of Austenitic-Ferritic Stainless Steel 03Kh24N8AD2M3

R. S. Fakhurtdinov, Yu. A. Puchkov, S. D. Karpukhin, P. N. Medvedev and A. G. Degtyareva p. 186 abstract

Aspects of Determining the Surface Activity of Dispersed Systems Based on Mineral Powders

A. V. Shamanina, V. M. Kononova, V. E. Danilov, M. A. Frolova and A. M. Ayzenshtadt p. 194 abstract

Comparative Tests of Fungal Resistance of Rubber Compounds Based on Nitrile Butyl Rubber under the Influence of Tropical Microorganisms and Standard Test Cultures. Part I

A. A. Krivushina, T. V. Bobyreva and R. R. Suleimanov p. 200 abstract

Formation of Porous Ca₃(PO₄)₂-Based Ceramic from Photocurable Emulsions

S. A. Tikhonova, P. V. Evdokimov, D. V. Prosvirnin and V. I. Putlyaev p. 205 abstract

Study of Strength Properties of a Nitrided Gear Wheel

N. I. Kitaev and S. Ya. Pichkhidze p. 211 abstract

Nuclear Magnetic Resonance Study of Ice-Based Composite Materials Reinforced with Nanodisperse Aluminum Oxide Fibers

E. V. Morozov, A. S. Voronin, S. V. Kniga and V. M. Buznik p. 217 abstract

The Effect of Compatibilizer on the Properties of a Highly Filled Composite Based on Aluminum Hydroxide and a Mixture of High- and Low-Density Polyethylenes

F. A. Mustafaeva, N. T. Kakhramanov and I. A. Ismailov p. 225 abstract

Comparative Study of Osteoplastic Potentials of Ceramics Based on Tricalcium and Octacalcium Phosphate In Vivo

F. F. Losev, A. A. Kulakov, I. I. Babichenko, V. S. Komlev, V. A. Semkin, A. N. Gurin, A. Yu. Fedotov and A. V. Kuzin p. 231 abstract

Resistance of Steels under Operating Conditions of Gas Fields Containing Aggressive CO₂ in the Produced Media

R. K. Vagapov p. 240 abstract

Contents

Inorganic Materials: Applied Research