Vol. 11, No. 1, 2020
Effect of Microcrystalline Boron Particles on Structure and Tribological Properties of Welded B83 Babbitt Layers
p. 1 abstract
Evolution of the Structure and Properties of High-Chromium Heat-Resistant VZh159 Alloy Prepared by Selective Laser Melting: Part I
p. 7 abstract
Evolution of the Structure and Properties of High-Chromium Heat-Resistant VZh159 Alloy Prepared by Selective Laser Melting: Part II
p. 17 abstract
The Effect of Antimony Alloying on the Microstructure and the Properties of Rapidly Solidified Alloy Bi–60 at % Sn
p. 25 abstract
Mechanical and Electrochemical Behavior of Austenite Alloy Synthesized by Selective Laser Melting Method
p. 31 abstract
Composite Thin Films Formed via the Mobile Meniscus Method from Nanodispersed Silver Particles. Structure and Conductivity
p. 38 abstract
Properties of Calcium Phosphate Powder Synthesized from Calcium Chloride and Potassium Pyrophosphate
p. 44 abstract
Hybrid Inorganic-Organic Materials Based on Shungite and Silver Nanoparticles
p. 50 abstract
Application of Integrated Fiber Bragg Lattices for Evaluating Ice Deformation
p. 55 abstract
Structure and Properties of Single-Crystal Films of Ferrite Spinels
p. 61 abstract
Improving the Structure and Properties of Cast Parts Made of Medium-Carbon Steel via Thermocyclic Treatment
p. 68 abstract
Film Fiber Radio-Absorbing Material
p. 74 abstract
Epoxy-Anhydride Binders with Phosphonium Catalyst for Fabrication of Products from Composition Materials through Pressure Impregnation
p. 79 abstract
Structure and Orientation Variations during Growth of Films of Pd–5 at % Pb Solid Solution
p. 85 abstract
Synthesis and Study of Influence of Mechanical Activation Processing on the Structure and Magnetic Properties of Sm2Fe17 – xAlxNy Nitride Powders
p. 89 abstract
Formation of the Interaction Zone on the Interlayer Boundary of the Explosion-Welded Composite VT1-0–NP2
p. 98 abstract
Compression Features of Ice Composite Materials with Natural Reinforcing Fillers
p. 103 abstract
Polymer Materials Containing Calсium Phosphates for Medicine: Part I. Methylcellulose and Starch Containing Calcium Phosphates (Review)
p. 109 abstract
Polymer Materials Containing Calсium Phosphates for Medicine: Part II. Chitosan and Polyvinylpyrrolidone Containing Calcium Phosphates (Review)
p. 117 abstract
Crystallization Kinetics of Composite Materials Based on Polyethylene Mixture with High and Low Density
p. 127 abstract
Structural Features of Welded Joint of Medium-Carbon Chromium Steel Containing Metastable Austenite
p. 132 abstract
The Influence of Nanocomposite Composition on Conductive and Hydrophobic Characteristics of Coatings
p. 140 abstract
Rheological Properties of Epoxy Urethane Oligomers and Сuring Kinetics of Polymer Composites on Their Basis
p. 147 abstract
Sintering and Properties of ZrO2–Al2O3 Composites with Additives Forming Melts Based on Sodium Silicate
p. 154 abstract
Effect of Temperature Exposure on Elemental Iron Content in Alumosilicate Ceramic
p. 160 abstract
Multidimensional Design of the Technology of Strengthening of a Hard Alloy in a Hydrosol of Red Clay
p. 164 abstract
Exchange Bias in Films of Iron Group Metals and Alloys
p. 172 abstract
Features of the Ferromagnetic Resonance of Amorphous FeSiBNbCu Ribbons with Different Compositions
p. 177 abstract
Measurement of the Parameters of Ferromagnetic Microwires in a Frequency Range from 0.1 to 20 GHz
p. 181 abstract
The Correlation between the Nanofiller Structure and the Properties of Polymer Nanocomposites: Fractal Model
p. 188 abstract
Calcium Phosphate Compositions with Polyvinyl Alcohol for 3D Printing
p. 192 abstract
Regularities of Structure Formation of Aluminum Powdered Particles Produced by Reactive Mechanical Alloying
p. 198 abstract
Effect of Cooling Rate under Quenching on the Structure and Properties of Sheets Made of High-Tech Alloy V-1341 of the Al–Mg–Si System
p. 202 abstract
Structure and Mechanical Properties of Composite Semifinished Products for Nb3Sn Superconductors
p. 208 abstract
A Study of the Micromagnetic Structure of Domain Walls in Ultrathin Magnetic Films
p. 213 abstract
Anisotropy in Characteristics of Low-Cycle Fatigue and the Structure of Single Crystals of Intermetallic Nickel Alloy VKNA25
p. 218 abstract
Magnetic Properties of Thin Films FexNi100 – x (x = 20, 17, 15%): Focus on High Frequency Sensor Applications
p. 226 abstract
Formation of CuO and Cu2O Crystalline Phases in a Reactor for Low-Pressure Arc Discharge Synthesis
p. 232 abstract
Mechanical and Operational Characteristics of Layered Titanium–Aluminum Foam Composite Materials
p. 238 abstract