Vol. 10, No. 1, 2019

Inorganic Materials: Applied Research

Carboborating of the Intermetallic Ti₃Al-Based Alloys

T. B. Ershova, N. M. Vlasova, I. A. Astapov and M. A. Teslina p. 1 abstract

The Impact of Severe Plastic Deformation on the Microstructure and Physicomechanical Properties of Al–0.4Zr

A. M. Mavlyutov, T. A. Latynina, M. Yu. Murashkin, R. Z. Valiev and T. S. Orlova p. 5 abstract

Modeling the Structure of a Reinforcing Phase at Heat Treatment of Steel Products

N. N. Svetushkov p. 12 abstract

Selection of Technological Parameters of Selective Laser Melting of Mechanocomposite Ti–Nb Powder

Zh. G. Kovalevskaya, V. V. Fedorov, M. G. Krinitsyn, N. S. Klochkov, M. A. Khimich and Yu. P. Sharkeev p. 19 abstract

Mechanism of the Hydrogen Cracking of Metals and Alloys, Part I (Review)

N. N. Sergeev, A. N. Sergeev, S. N. Kutepov, A. G. Kolmakov and A. E. Gvozdev p. 24 abstract

Mechanism of the Hydrogen Cracking of Metals and Alloys, Part II (Review)

N. N. Sergeev, A. N. Sergeev, S. N. Kutepov, A. G. Kolmakov and A. E. Gvozdev p. 32 abstract

Perspective Preparation Approaches of Nanocrystalline Ceria: Review

I. V. Zagaynov p. 42 abstract

Structure and Properties of the Boron Carbide Powder Obtained by the Mechanochemical Synthesis of the Carbon Char and Amorphous Boron Mix

Zh. V. Eremeeva, L. V. Myakisheva, V. S. Panov, A. V. Lizunov, A. A. Nepapushev, D. A. Sidorenko, E. V. Apostolova and D. Yu. Mishunin p. 49 abstract

Effect of Thermal Aging on Deformation Properties of Nitrile-Butadiene Rubber: Atomic Force Microscopy Data

N. V. Shadrinov p. 53 abstract

Influence of Aluminum and Hydrogen on the Properties of Sm₂Fe₁₇

S. V. Veselova, V. N. Verbetsky, A. G. Savchenko and I. V. Shchetinin p. 58 abstract

Study of Effect of Damage Accumulation on Stress Distribution Parameters in Mesovolume of Biocomposite and Its Performance Characteristics

V. A. Mikushina, I. Yu. Smolin and Yu. N. Sidorenko p. 66 abstract

Polymer Composites Based on Aramid Fibers with Increased Shear Strength for Aircraft Engineering Products

M. I. Valueva and G. F. Zhelezina p. 70 abstract

Spark Plasma Sintering of the Stock Material Made of the Boron Carbide Obtained by Different Methods

Zh. V. Eremeeva, L. V. Myakisheva, V. S. Panov, V. Yu. Lopatin, A. V. Lizunov, A. A. Nepapushev, D. A. Sidorenko, E. V. Apostolova and D. Yu. Mishunin p. 74 abstract

Computer-Aided Design of Process of Fabrication on Steel of Solid Lubricating Coating Based on Bank Sand

A. A. Shmatov, A. E. Solomyanskii and O. M. Kolbasenko p. 81 abstract

Substructures in Destructed Samples of Polycrystalline Cu–Mn Solid Solutions

L. I. Trishkina, T. V. Cherkasova and N. A. Koneva p. 89 abstract

The Impact of Strain Aging on the Mechanical Properties of Steel 37KhGF

V. A. Khotinov, V. M. Farber and O. N. Polukhina p. 93 abstract

The Influence of Thermal Cycling on the Aging Processes and Physical and Mechanical Properties of a TiNi Alloy

A. A. Churakova and D. V. Gunderov p. 98 abstract

Consolidation of Nanocrystals of Detonation Nanodiamond under Thermobaric Sintering

D. G. Bogdanov, V. A. Plotnikov, A. S. Bogdanov, S. V. Makarov, V. G. Vins, A. P. Eliseev and A. A. Chepurov p. 103 abstract

Mechanical Characteristics of Composites Based on β-Ca₃(PO₄)₂/Poly(D,L-Lactide) and β-Ca₃(PO₄)₂/Poly(ε-Caprolactone)

D. M. Zuev, E. S. Klimashina, P. V. Evdokimov, Ya. Yu. Filippov and V. I. Putlyaev p. 109 abstract

Laser Dispersion of Titanium and Magnesium Oxides in Zr–1% Nb Alloy Affecting Surface Structure and Protective Properties

I. O. Bashkova, S. M. Reshetnikov, F. Z. Gil’mutdinov and E. V. Kharanzhevskii p. 114 abstract

Properties of Compositions Based on Cement and Modified Nanodispersed Titanium Dioxide

V. V. Tyukavkina, L. G. Gerasimova and V. V. Semushin p. 122 abstract

Evaluating the Microhardness of Samples Based on Binder VST-1210 Cured under Various Conditions as a Method of Testing

E. A. Veshkin, V. I. Postnov and V. V. Semenychev p. 127 abstract

Reducing the Rate of Plasticizer Leaching from Poly(vinyl chloride) Matrix

A. V. Dedov and N. V. Chernousova p. 131 abstract

Additive Technologies for Design of Structural Materials on the Basis of the Nanocenter of the National Research Center Kurchatov Institute—CRISM Prometey

A. S. Zhukov, B. K. Barakhtin and A. V. Voznyuk p. 135 abstract

Study of the Influence of Different Types of Treatment of the 12H18N10T Medical Steel Surface on Antibacterial Effect

V. O. Lukyanova and S. Ya. Pichkhidze p. 140 abstract

Wear-Resistant Coatings on WC–Co Hard Alloys Synthesized by Concentrated Energy Flows

T. N. Oskolkova and A. M. Glezer p. 146 abstract

Change in Interlayer Strength and Fracture Toughness of Carbon-Carbon Composite Material under the Impact of Cyclic Loads

A. A. Stepashkin, D. Yu. Ozherelkov, Yu. B. Sazonov, A. A. Komissarov and V. V. Mozalev p. 155 abstract

Effect of Synthesis Conditions on the Structure and Phase Composition of Magnesium Diboride

I. M. Abdyukhanov, A. S. Tsapleva, A. V. Borisov, O. A. Krymskaya, M. G. Isaenkova and D. K. Figurovskii p. 162 abstract

Interconnection of Structural Characteristics with Dynamic Properties of A5083 Aluminum Alloy

I. G. Brodova, A. N. Petrova, S. V. Razorenov and E. V. Shorokhov p. 168 abstract

Relaxation Spectroscopy of Polyethylenes of Different Molecular Weight

V. A. Lomovskoy, S. A. Mazurina, I. D. Simonov-Emel’yanov, M. R. Kiselev and N. Yu. Konstantinov p. 174 abstract

Nanocomposite Synthesized in Plasma of Pulse High-Voltage Discharge Initiated between Copper Electrodes in the Presence of Fluoroplast

V. G. Kuryavyi, V. M. Buznik, A. Yu. Ustinov, S. V. Sukhoverkhov, A. D. Pavlov, A. B. Slobodyuk, I. A. Tkachenko, A. A. Kvach and T. A. Kaidalova p. 184 abstract

Method of Estimation of Mechanical Properties of the Surface Layer of Cutter Elements Made of Polycrystalline Superhard Composites Based on Cubic Boron Nitride

S. A. Klimenko, A. S. Manokhin, N. N. Belousova, A. G. Kolmakov, E. O. Nasakina, M. L. Heifets and I. M. Zakiev p. 195 abstract

Cytocompatibility and Matrix Properties of Surfaces of Nanostructured Calcium Phosphate Cements

A. V. Nesterova, N. S. Sergeeva, I. K. Sviridova, V. V. Smirnov, V. A. Kirsanova, S. A. Akhmedova, S. M. Barinov and A. G. Mustafin p. 202 abstract

Estimation of Mechanical Properties of Wrapping Polyethylene Films

O. V. Kuzovleva, A. G. Kolmakov, A. N. Sergeev, A. E. Gvozdev and D. V. Maliy p. 210 abstract

Structural Features of Cu–Ag Alloys Obtained via Mechanical Alloying with the Use of Cold and Cryogenic Severe Plastic Deformation

T. P. Tolmachev, V. P. Pilyugin, O. V. Antonova, A. I. Ancharov, A. M. Patselov, E. G. Chernyshev and A. A. Yaroslavtsev p. 214 abstract

The Influence of Sulfur, Phosphorus, and Silicon Impurities on Structure and Properties of Single Crystals of Nickel Heat-Resistant Alloys

P. G. Min, D. E. Kablov, V. V. Sidorov and V. E. Vadeev p. 220 abstract

Transfer of Mechanical Stress from Polymer Matrix to Nanofiller in Dispersion-Filled Nanocomposites

G. V. Kozlov and I. V. Dolbin p. 226 abstract

Functional Properties of Nickel–Titanium/Silicone Rubber Composite

M. Yu. Kollerov, E. A. Lukina, D. E. Gusev and A. A. Borisov p. 231 abstract

Activation of Structure Formation Processes in Cement Systems by Magnetic Field

N. P. Gorlenko, Yu. S. Sarkisov and N. V. Subbotina p. 237 abstract

On the Choice of the Architecture of Osteoconductive Bioceramic Implants

A. A. Tikhonov, P. V. Evdokimov, V. I. Putlyaev, T. V. Safronova and Ya. Yu. Filippov p. 242 abstract

Contents

Inorganic Materials: Applied Research