Contents

Inorganic Materials: Applied Research

Vol. 9, No. 1, 2018

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Inorganic Materials: Applied Research ISSN 2075-1133.

Low-Cycle Fatigue under Controlled Deformation and Fracture of the Superalloy VZh175

M. S. Belyayev, V. F. Terentyev, M. A. Gorbovets, M. M. Bakradze and O. S. Antonova p. 1  abstract

Preparation and Adhesive Properties of Chromium Oxide Nanolayers

Yu. K. Yezhovskiy and S. D. Dubrovenskii p. 9  abstract

Phase Transformations, Strength, and Modulus of Elasticity of Ti–15Mo Alloy Obtained by High-Pressure Torsion

S. A. Gatina, I. P. Semenova, E. V. Ubyyvovk and R. Z. Valiev p. 14  abstract

Antiwear Properties of Composite Greases “Litol-24–Magnesium Hydrosilicate Particles”

A. D. Breki, V. V. Medvedeva, N. A. Krylov, A. G. Kolmakov, Yu. A. Fadin, A. E. Gvozdev, N. N. Sergeev, S. E. Aleksandrov and D. A. Provotorov p. 21  abstract

Rail Strengthening Nature in the Course of Long-Term Operation

V. E. Gromov, O. A. Peregudov, A. M. Glezer, K. V. Morozov, Yu. F. Ivanov and A. B. Yur’ev p. 26  abstract

On the Problem of Roadmapping of Domestic Arctic Materials Science: Part I

V. M. Buznik, N. P. Burkovskaya, I. V. Zibareva and R. N. Cherepanin p. 32  abstract

On the Problem of Roadmapping of Domestic Arctic Materials Science: Part II

V. M. Buznik, N. P. Burkovskaya, I. V. Zibareva and R. N. Cherepanin p. 41  abstract

Mechanical Properties of Composite Materials Based on Latex-Impregnated Needle-Punched Nonwoven Fabrics from Fibers of Different Nature

A. V. Dedov and V. G. Nazarov p. 47  abstract

Metal-Ceramic Composites Based on Iron Oxide for Low-Consumption Anode during Electrolytic Extraction of Aluminum

Yu. F. Kargin, E. N. Samoilov, V. I. Makarenkov and A. S. Lysenkov p. 52  abstract

A Vacancy Model of Pore Annihilation During Hot Isostatic Pressing of Single Crystals of Nickel-Base Superalloys

A. I. Epishin, B. S. Bokstein, I. L. Svetlov, B. Fedelich, T. Feldmann, Y. Le Bouar, A. Ruffini, A. Finel, B. Viguier and D. Poquillon p. 57  abstract

Synthesis and Growth of GaSe1 – xSx (x = 0–1) Crystals from Melt. Phase Composition and Properties

N. N. Kolesnikov, E. B. Borisenko, D. N. Borisenko, A. N. Tereshchenko and A. V. Timonina p. 66  abstract

Gene-Activated Bone Substitute Based on Octacalcium Phosphate and Doped with Magnesium Ions

I. Y. Bozo, R. V. Deev, M. N. Zhuravlyova, V. S. Komlev, V. K. Popov, I. V. Smirnov and A. Yu. Fedotov p. 70  abstract

Fatigue Behavior of Titanium Alloys under Very High Cycle Fatigue Loading

A. D. Nikitin, A. A. Shanyavskiy and N. N. Beklemishev p. 75  abstract

Electrochemical Detection of Barrier Layer Removal for Preparation of Anodic Alumina Membranes with High Permeance and Mechanical Stability

E. S. Pyatkov, M. V. Berekchiyan, A. A. Yeliseyev, A. V. Lukashin, D. I. Petukhov and K. A. Solntsev p. 82  abstract

Composite Coatings Based on Low-Temperature Calcium Phosphates for Intraosseous Implants

S. M. Barinov, A. Yu. Ivannikov, V. I. Kalita, D. I. Komlev, V. S. Komlev, A. A. Radyuk, I. V. Smirnov and A. Yu. Fedotov p. 88  abstract

Synthesis, Structure, and Electrochemical Characteristics of Carbon Inverse Opals

N. S. Sukhinina, V. M. Masalov, A. A. Zhokhov, I. I. Zverkova, Q. Liu, J. Wang and G. A. Emelchenko p. 92  abstract

New Fibrous Materials Based on Poly-3-Hydroxybutyrate for Biomedical Purposes, Made via Electrospinning Technique

A. A. Olkhov, A. A. Krutikova, M. A. Goldshtrakh, N. A. Orlov, A. A. Ischenko, O. V. Staroverova and A. L. Iordanskii p. 100  abstract

The Influence of Content of Reinforcing Filler on Mechanical Properties of Carbon-Glass Fiber Reinforced Plastics in Matrix T-107

O. V. Ovdak, Yu. E. Kalinin, A. M. Kudrin, O. A. Karaeva and D. Ya. Degtyarev p. 108  abstract

Physicomechanical Properties of Glacial Composite Materials Reinforced by Rusar-S Fibers

R. N. Cherepanin, G. A. Nuzhnyi, N. A. Razomasov, G. Yu. Goncharova and V. M. Buznik p. 114  abstract

Agglomeration and Properties of Ceramics Based on Partially Stabilized Zirconium Dioxide Containing Oxides of Aluminum and Iron

V. V. Smirnov, T. O. Obolkina, A. I. Krylov, S. V. Smirnov, M. A. Gol’dberg, O. S. Antonova, D. D. Titov and S. M. Barinov p. 121  abstract

Investigation of Photodegradation of High-Density Polyethylene Containing Cyclohexyl Phosphonic Acid and Its Nickel Salts

A. Kh. Shaov, T. A. Borukayev, A. M. Kharayev, A. K. Mikitayev and A. N. Beslaneeva p. 125  abstract

Reinforcement of Brushite Cement Based on α-TCP by Rigid Polylactide Framework

P. V. Evdokimov, I. V. Fadeeva, A. S. Fomin, Ya. Yu. Filippov, V. K. Kovalkov, A. V. Knotko, V. I. Putlyaev and S. M. Barinov p. 130  abstract

Gold Nanoparticles: Synthesis, Optical Properties, and Application

V. A. Ogarev, V. M. Rudoi and O. V. Dement’eva p. 134  abstract

Improvement of Structure and Properties of Scintillation Composites by Centrifugation

N. V. Klassen, A. P. Pokidov and V. V. Kedrov p. 141  abstract

Electrically Conductive Inks Based on Polymer Composition for Inkjet Printing

A. S. Sergeev, A. R. Tameev, V. I. Zolotarevskii and A. V. Vannikov p. 147  abstract