Contents

Inorganic Materials: Applied Research

Vol. 8, No. 1, 2017

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Inorganic Materials: Applied Research ISSN 2075-1133.

Microstructure Evolution of Titanium Alloy VT8М-1 with Globular-Lamellar Structure during Deformation in Temperature Range of 650–800°С

G. S. Dyakonov, I. P. Semenova, N. V. Lopatin, Yu. F. Grishina and I. A. Melemchuk p. 1  abstract

Evolution of Polymer Matrix Structure in Carbon-Fiber-Reinforced Plastic Based on Polycyanurate and Polyarylsulfone during Accelerated Climatic Tests

N. S. Perov, E. Yu. Chutskova, A. I. Gulyaev and D. V. Abramov p. 7  abstract

Influence of Microalloying with Rare Earth Metals and Production Technology of Structural Intermetallide Alloy Based on Nickel Aluminide on Alloy Properties

O. A. Bazyleva, E. G. Arginbayeva, A. B. Echin and A. V. Shestakov p. 14  abstract

Glycolates and Сellosolvates of Metals as Prospective Materials for Production of Oxide Powders and Thin-Film Coatings

E. E. Grinberg, I. E. Strelnikova, A. E. Amelina and Yu. I. Levin p. 21  abstract

Defects of Heat-Resistant Alloys Synthesized by the Method of Selective Laser Melting

N. P. Alyoshin, V. V. Murashov, M. V. Grigoryev, A. G. Yevgenov, F. N. Karachevtsev, N. A. Shchipakov and S. A. Vasilenko p. 27  abstract

Synthesis and Dry Sliding Behavior of Composite Coating with (R–OOO)FT Polyimide Matrix and Tungsten Disulfide Nanoparticle Filler

A. D. Breki, A. L. Didenko, V. V. Kudryavtsev, E. S. Vasilyeva, O. V. Tolochko, A. G. Kolmakov, A. E. Gvozdev, D. A. Provotorov, N. E. Starikov and Yu. A. Fadin p. 32  abstract

Wetting of Ag, Au, and BeO by Melts of B2O3 and B2O3 + PbO

L. T. Denisova, Yu. F. Kargin and D. O. Krinitsin p. 37  abstract

Features of Surface Preparation for Nondestructive X-ray Diagnostics of the Stress State of Railway Metal Critical Parts

S. A. Nikulin, S. L. Shitkin, A. B. Rozhnov and T. A. Nechaykina p. 42  abstract

Composite Hydrogels Based on Alginate-Reinforced Calcium Phosphate Ceramics for Tissue Engineering

N. A. Pavlov, A. Yu. Teterina, S. M. Barinov, V. S. Komlev and A. Yu. Fedotov p. 47  abstract

The Electrical Properties of Cu2Se + Cu2O Composites

A. S. Ivanov, Yu. E. Kalinin, V. V. Bavykin and A. S. Shuvayev p. 50  abstract

Composite Coatings Based on A–OOO Polyimide and WS2 Nanoparticles with Enhanced Dry Sliding Characteristics

A. D. Breki, A. L. Didenko, V. V. Kudryavtsev, E. S. Vasilyeva, O. V. Tolochko, A. E. Gvozdev, N. N. Sergeyev, D. A. Provotorov, N. E. Starikov, Yu. A. Fadin and A. G. Kolmakov p. 56  abstract

Investigations of Variations in Surface State of Polymer Films under Structural Rearrangements in Air and during Contact with Water

O. V. Dvoretskaya, V. P. Grachev, S. A. Kurochkin, E. O. Perepelitsina and L. B. Boinovich p. 60  abstract

Fractal Analysis of Fracture of Powder Metallurgical Hard Alloy

I. G. Grigorov, Yu. G. Zaynulin and G. P. Shveykin p. 67  abstract

Composite Сoatings with Refractory Metal Matrix Reinforced with Nanodispersed Metal-Ceramic Component

I. V. Gorynin, G. S. Burkhanov and B. V. Farmakovskiy p. 75  abstract

Study of Liquid-Phase Sintering of Materials Based on Zirconium Dioxide Containing Alumina

V. V. Smirnov, A. I. Krylov, S. V. Smirnov, M. A. Goldberg, O. S. Antonova, L. I. Shvorneva and S. M. Barinov p. 81  abstract

Relaxation Transitions in Polyvinyl Alcohol and Porous Polyvinyl Formals

V. A. Lomovskoy, N. A. Abaturova, N. Yu. Lomovskaya, O. A. Khlebnikova and T. B. Galushko p. 84  abstract

Influence of Sulfur on Heat Resistance of Single Crystals of Heat-Resistant Nickel Alloy of Ni–Al–Co–Re–Ta–Mo–W–Ru–Cr System

P. G. Min, V. V. Sidorov, S. A. Budinovskiy and V. E. Vadeyev p. 90  abstract

Influence of Tensile Stresses on the Corrosion Resistance of Titanium Alloy VT22 in Aqueous Solution of NaCl

V. M. Polyanskiy, Yu. A. Puchkov, M. R. Orlov, S. A. Napriyenko and A. V. Lavrov p. 94  abstract

Phase Composition and Grain Structure of Quick-Hardening Alloy Pb–13 wt % Sb

V. G. Shepelevich, O. N. Belaya, O. V. Gusakova and E. Yu. Neumerzhitskaya p. 100  abstract

Influence of Coherence Violation on Growth of $\gamma {\text{'}}$-Phase Particles in Heat-Resistant Nickel Alloys

D. V. Zaytsev and A. A. Alekseyev p. 104  abstract

New Tribological Composites Based on Polytetrafluoroethylene

V. N. Kornopoltsev, D. M. Mognonov, O. Zh. Ayurova and S. L. Buyantuyev p. 108  abstract

Formation and Investigation of Composite Material Silver–Nitinol for Medical Purposes

E. O. Nasakina, A. S. Baikin, K. V. Sergiyenko, A. V. Leonov, M. A. Kaplan, A. V. Seryogin, S. V. Konushkin, N. V. Myasnikova, M. A. Sevostyanov, A. G. Kolmakov and S. V. Simakov p. 112  abstract

Calcium Pyrophosphate Powder for Production of Bioceramics Synthesized from Pyrophosphoric Acid and Calcium Acetate

T. V. Safronova, S. A. Kurbatova, T. B. Shatalova, A. V. Knotko, P. V. Yevdokimov and V. I. Putlyayev p. 118  abstract

On Friction of Metallic Materials with Consideration for Superplasticity Phenomenon

A. D. Breki, A. E. Gvozdev, A. G. Kolmakov, N. E. Starikov, D. A. Provotorov, N. N. Sergeyev and D. M. Khonelidze p. 126  abstract

Effect of Plasma Electrolytic Nitrocarburizing on Phase Composition of 0.3C-1Mn-1Si-Fe Steel

N. A. Popova, L. G. Zhurerova, E. L. Nikonenko and M. K. Skakov p. 130  abstract

Influence of Ripening in Mother Solution on Characteristics of Magnesium-Substituted Calcium Phosphate Powders

M. A. Goldberg, V. V. Smirnov, O. S. Antonova, L. I. Shvorneva, A. A. Konovalov, E. A. Kudryavtsev, S. V. Smirnov and S. M. Barinov p. 136  abstract

Structure and Properties of Nitrile-Butadiene Rubber Filled with Carbon and Basalt Fibers

N. V. Shadrinov and S. I. Nartakhova p. 140  abstract

Decrease in Extraction Rate of Poly(vinyl chloride) Plasticizing Agent in Case of Addition of Nanofiller

Yu. N. Rybakov, A. V. Dedov and S. I. Chirikov p. 145  abstract

Temperature Distribution and Structure in the Heat-Affected Zone for Steel Sheets after Laser Cutting

A. E. Gvozdev, N. N. Sergeyev, I. V. Minayev, A. G. Kolmakov, I. V. Tikhonova, A. N. Sergeyev, D. A. Provotorov, D. M. Khonelidze, D. V. Maliy and I. V. Golyshev p. 148  abstract

Colloidal Forming of Chemically Bonded Calcium Phosphate Composites

V. I. Putlyaev, T. V. Safronova, Ya. Yu. Filippov and P. V. Evdokimov p. 153  abstract

Influence of Cobalt Alloying on Structure and Long-Term Strength of Al–Cu–Mg–Ag Alloy System

D. K. Ryabov, K. V. Antipov, T. V. Fesenko and N. V. Dynin p. 159  abstract

Properties of Thin Films of Tungsten Sulfide and Copper Sulfide Produced by Magnetron Sputtering Method

V. V. An, V. M. Pogrebenkov and A. N. Zakharov p. 166  abstract

Electroluminescence and Electron–Hole Mobility of 6,12-Di(thien-2-il)indolo[3,2-b]carbazoles

A. V. Dmitriyev, A. R. Yusupov, R. A. Irgashev, N.A. Kazin, E. I. Maltsev, D. A. Lypenko, G. L. Rusinov, A. V. Vannikov and V. N. Charushin p. 172  abstract

Properties and Phase Transformations Progressing in Complex Alloyed Stainless Austenitic Steel upon Heating

L. A. Maltseva, K. D. Vakhonina, A. V. Levina, T. V. Maltseva and V. A. Sharapova p. 176  abstract

Preparation of a New Sorption Material Based on Modified Shungite

I. A. Polunina, I. S. Goncharova, G. A. Petukhova, V. V. Vysotskiy, K. E. Polunin and A. K. Buryak p. 181  abstract

Crystal Phase Formation in Colored Leucite-Reinforced Glass-Ceramics for Dental Restorations

T. A. Khabas, V. V. Klimova, S. I. Starosvetskiy, A. P. Vasilyeva and M. A. Zvigintsev p. 186  abstract