Contents
Inorganic Materials: Applied Research


Vol. 7, No. 1, 2016

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Inorganic Materials: Applied Research ISSN 2075-1133.


Investigation of Phase Transitions in a System of Cd–Hg–Te Solid Solutions
in a Powerful Laser Radiation Field

O. M. Kugayenko, B. R. Senatulin, I. M. Karnaukh, V. S. Petrakov, K. A. Shcherbakov,
V. G. Sredin, M. V. Sakharov, J. I. Astrauskas, Yu. V. Vasilyeva, and K. R. Kurbanov
p. 1  abstract

Formation Inhomogeneity of Deformation Martensite in Rolled Foil
of Fe–28%Ni–5%Mo Alloy under Bending

Yu. A. Perlovich, M. G. Isayenkova, V. A. Fesenko, and T. I. Dementyeva p. 9  abstract

Rheological Properties of System “Elastomer Binder–Discrete Carbon Fiber”

L. P. Kobets, G. V. Malysheva, and A. S. Borodulin p. 15  abstract

Strengthening of Deformable Bone Cements in the Calcium Phosphates–Chitosan System
by Tricalcium Phosphate Granules

A. Yu. Teterina, A. A. Egorov, A. Yu. Fedotov,
S. M. Barinov, and V. S. Komlev
p. 20  abstract

Reactivity of Oxide Matrix Surface during Atomic Layer Deposition

Yu. K. Yezhovskiy p. 24  abstract

Increase in Strength of Porous Alumina Ceramic by Additives
of Aluminum Oxide Nanopowder

V. I. Vereshchagin, O. A. Proskurdina, T. A. Khabas,
S. I. Starosvetskiy, and D. V. Proskurdin
p. 29  abstract

Database on the Bandgap of Inorganic Substances and Materials

N. N. Kiselyova, V. A. Dudarev, and M. A. Korzhuyev p. 34  abstract

Investigation of the Structure and Magnetic Properties of Metastable
Phases in Fe–B Alloys Melt Spun

V. P. Menushenkov, E. S. Savchenko, T. A. Sviridova, and A. G. Savchenko p. 40  abstract

Evolution of Pore Morphology in Single-Crystals of Nickel-Base Superalloys

A. I. Epishin and I. L. Svetlov p. 45  abstract

Synthesis of Polycrystalline Cubic Boron Nitride from Hexagonal Boron Nitride
after Mechanical Activation and Modification with Aluminum

V. T. Senyut, P. A. Vityaz, S. A. Kovalyova, E. I. Mosunov,
I. V. Valkovich, and T. V. Gamzeleva
p. 53  abstract

Modification of Isotactic Polypropylene by Additives of Low-Density
Polyethylene and Powdered Cellulose

E. E. Mastalygina, O. V. Shatalova, N. N. Kolesnikova,
A. A. Popov, and A. V. Krivandin
p. 58  abstract

Deformation Behavior Features of Composite of Polystyrene with Cesium Sulfate Filler
during Ultraviolet and X-Ray Irradiation

A. P. Pokidov, N. V. Klassen, V. V. Kedrov, and I. M. Shmytko p. 66 abstract

Effect of Hydrothermal Influence on Properties and Microstructure
of Bioinert Ceramic Yb–TZP

L. I. Podzorova, S. A. Titov, A. A. Ilychyova, N. A. Mikhaylina,
O. I. Penkova, V. M. Levin, and E. S. Morokov
p. 74  abstract

Polyamides and Polyester Amides Based on Triarylmethane-Type Diamines

T. A. Borukayev, A. V. Orlov, R. Z. Oshroyeva,
Kh. V. Mashukov, and A. K. Mikitayev
p. 79  abstract

Influence of Nanoparticles of Cesium Sulfate and Deformation on Structure,
Vibration Spectra, and Luminescence of Polystyrene

A. P. Pokidov, N. V. Klassen, V. V. Kedrov, I. M. Shmytko,
A. V. Bazhenov, and T. N. Fursova
p. 85  abstract

A Composite Material Based on Al2O3 Dispersion-Strengthened Nickel Aluminide

N. P. Burkovskaya, I. Yu. Yefimochkin, N. V. Sevostyanov, and A. I. Rodionov p. 91  abstract

Investigation of Aluminum–Copper Bimetal-Based Intermetallide Coating
Produced by Contact Melting Method

D. V. Pronichev, L. M. Gurevich, Yu. P. Trykov, and M. D. Trunov p. 97  abstract

Study of the Effect of Composition on the Microstructure and Thermophysical
Properties of Niobium-Based Refractory Systems

V. V. Murasheva, Yu. V. Loshchinin, T. M. Shcheglova, S. I. Pakhomkin,
M. G. Razmakhov, F. N. Karachevtsev, I. Yu. Efimochkin,
B. V. Shchetanov, N. P. Burkovskaya, and N. V. Sevostyanov
p. 102  abstract

Study of Heat and Humidity Effect on Phthalonitrile Matrix

E. O. Valevin, I. V. Zelenina, P. S. Marakhovskiy,
A. I. Gulyayev, and S. V. Bukharov
p. 110  abstract

Enhancement of Mechanical and Tribotechnical Properties of Structural Steel
by Electrical Discharge Machining

Yu. K. Mashkov, M. Yu. Baybaratskaya, and B. Sh. Alimbayeva p. 115  abstract

Influence of Polarizing Current Form on Protective Properties
of Plasma-Sprayed Electrolytic Coating on Alloy ML5

I. A. Kozlov, N. V. Kulyushina, and A. E. Kutyrev p. 119  abstract

Peculiarities of Isolated Acoustic Pulses Generated for Exerting Influence
on a Treated Material in Liquid Media

O. M. Gradov p. 126  abstract

Quantitative Determination of Content of Magnetite and Maghemite
in Their Mixtures by X-Ray Diffraction Methods

A. B. Mikhaylova, V. P. Sirotinkin, M. A. Fedotov,
V. P. Korneyev, B. F. Shamray, and L. V. Kovalenko
p. 130  abstract

Improvement of Manufacture Technology of Nanostructured Diamond Materials
with the Use of Physicochemical Nonequilibrium Analysis

M. L. Kheyfets, A. G. Kolmakov, P. A. Vityaz,
V. T. Senyut, and S. A. Klimenko
p. 137  abstract

Study of NbSi Composites Reinforced by Single-Crystal Fibers of -Al2O3
with and without Interfacial Coating

B. V. Shchetanov, I. U. Yefimochkin, V. V. Murashyova, and T. M. Shcheglova p. 143 abstract


Pleiades Publishing home page | journal home page | top

If you have any problems with this server, contact webmaster.