Contents

Journal of Friction and Wear


Vol. 38, No. 6, 2017

A simultaneous English language translation of this journal is available from Pleiades Publishing, Ltd.
Distributed worldwide by Springer. Journal of Friction and Wear ISSN 1068-3666.


New Approach for Prediction of Non-Conformal Contact Fatigue Life Considering Lubrication Performance Parameters

S. C. An, S. D. Lee, J. H. Son and Y. J. Cho p. 419  abstract

Fluid Flow Analysis for Friction Torque around Rolling Element in Ball Bearings

Choong Hyun Kim and Jun Hyeon Jo p. 424  abstract

Multi-Objective Optimization of Spur Gearbox with Inclusion of Tribological Aspects

Maruti Patil, P. Ramkumar and K. Shankar p. 430  abstract

Application of Semi-Hertzian Approach to Predict the Dynamic Behavior of Railway Vehicles Through a Wear Evolution Model

Smitirupa Pradhan, Arun Kumar Samantaray and Ranjan Bhattacharyya p. 437  abstract

High-Speed Contact Study between a Ti-6-Al-4V Tool and an Abradable Coating Using Ballistic Benches and a Dynamic Compensation Approach

Andrea Cappella, Julien Vincent, Sylvain Philippon and Laurent Faure p. 444  abstract

The Effect of WS2 Powder Added Lubricant on Friction and Wear of Tetrahedral Amorphous Carbon Coating Films

Yeoh Chin Ean, Jong-Hyoung Kim, Si-Geun Choi, Willey Liew Yun Hsien, Nancy Julius Siambun and Seock-Sam Kim p. 450  abstract

Tribological Properties of a C/C–SiC–Cu Composite Brake Disc

B. C. Goo p. 455  abstract

Tribological Performance of Laser-Textured Polyoxymethylene under Boundary Lubricated Sliding Condition

Junho Jeong and Minhaeng Cho p. 462  abstract

Scratch Behavior of ZrO2 Thin Film Prepared by Atomic Layer Deposition Method on Silicon Wafer

Si Hwan Kim, Byung Chan Yang, Jihwan An and Hyo Sok Ahn p. 469  abstract

Analysis of Physical Friction Characteristics about Handwrite Feeling—Rough and Smooth

J. H. Park, M. S. Kim and Y. Z. Lee p. 477  abstract

Electrochemical Analysis of the Slurry Composition for Chemical Mechanical Polishing of Flexible Stainless-Steel Substrates

Dasol Lee, Hyunjin Kim, Byeongjun Pak, Doyeon Kim, Haedo Jeong and Hyunseop Lee p. 482  abstract

Efficiency Analysis of a Cycloid Reducer Considering Tolerance

Anh-Duc Pham and Hyeong-Joon Ahn p. 490  abstract